diff options
| author | Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> | 2021-03-04 20:54:23 +0300 |
|---|---|---|
| committer | Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> | 2021-03-04 20:54:23 +0300 |
| commit | e8701195e66f2d27ffe17fb514eae8173795aaf7 (patch) | |
| tree | 9f519c4abf6556b9ae7190a6210d87ead1dfadde /Marlin/src/pins/ramps | |
| download | kp3s-lgvl-e8701195e66f2d27ffe17fb514eae8173795aaf7.tar.xz kp3s-lgvl-e8701195e66f2d27ffe17fb514eae8173795aaf7.zip | |
Initial commit
Diffstat (limited to 'Marlin/src/pins/ramps')
59 files changed, 7799 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_3DRAG.h b/Marlin/src/pins/ramps/pins_3DRAG.h new file mode 100644 index 0000000..6c7f7f4 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_3DRAG.h @@ -0,0 +1,164 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments + */ + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "3Drag" +#endif + +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME +#endif + +#ifndef DEFAULT_SOURCE_CODE_URL + #define DEFAULT_SOURCE_CODE_URL "3dprint.elettronicain.it" +#endif + +// +// Heaters / Fans +// +#define RAMPS_D8_PIN 9 +#define RAMPS_D9_PIN 8 +#define MOSFET_D_PIN 12 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN -1 // Hardware PWM but one is not available on expansion header +#endif + +#include "pins_RAMPS.h" + +// +// Limit Switches +// +#undef Z_MAX_PIN + +// +// Steppers +// +#undef Z_ENABLE_PIN +#define Z_ENABLE_PIN 63 + +// +// Heaters / Fans +// +#define HEATER_2_PIN 6 + +// +// Misc. Functions +// +#undef SDSS +#define SDSS 25 + +#undef SD_DETECT_PIN +#define SD_DETECT_PIN 53 + +// +// LCD / Controller +// +#if IS_ULTRA_LCD && IS_NEWPANEL + #undef BEEPER_PIN + + #undef LCD_PINS_RS + #undef LCD_PINS_ENABLE + #undef LCD_PINS_D4 + #undef LCD_PINS_D5 + #undef LCD_PINS_D6 + #undef LCD_PINS_D7 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 37 + #define LCD_PINS_D5 35 + #define LCD_PINS_D6 33 + #define LCD_PINS_D7 31 + + // Buttons + #undef BTN_EN1 + #undef BTN_EN2 + #undef BTN_ENC + #define BTN_EN1 16 + #define BTN_EN2 17 + #define BTN_ENC 23 + +#else + + #define BEEPER_PIN 33 + +#endif // IS_ULTRA_LCD && IS_NEWPANEL + +/** + * M3/M4/M5 - Spindle/Laser Control + * + * If you want to control the speed of your spindle then you'll have + * have to sacrifce the Extruder and pull some signals off the Z stepper + * driver socket. + * + * The following assumes: + * - the Z stepper driver socket is empty + * - the extruder driver socket has a driver board plugged into it + * - the Z stepper wires are attached the the extruder connector + * + * If you want to keep the extruder AND don't have a LCD display then + * you can still control the power on/off and spindle direction. + * + * Where to get spindle signals + * + * stepper signal socket name socket name + * ------- + * SPINDLE_LASER_ENA_PIN /ENABLE O| |O VMOT + * MS1 O| |O GND + * MS2 O| |O 2B + * MS3 O| |O 2A + * /RESET O| |O 1A + * /SLEEP O| |O 1B + * SPINDLE_LASER_PWM_PIN STEP O| |O VDD + * SPINDLE_DIR_PIN DIR O| |O GND + * ------- + * + * Note: Socket names vary from vendor to vendor + */ +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not good with 3DRAG +#undef SPINDLE_LASER_ENA_PIN +#undef SPINDLE_DIR_PIN + +#if HAS_CUTTER + #if !EXTRUDERS + #undef E0_DIR_PIN + #undef E0_ENABLE_PIN + #undef E0_STEP_PIN + #undef Z_DIR_PIN + #undef Z_ENABLE_PIN + #undef Z_STEP_PIN + #define Z_DIR_PIN 28 + #define Z_ENABLE_PIN 24 + #define Z_STEP_PIN 26 + #define SPINDLE_LASER_PWM_PIN 46 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 62 // Pullup! + #define SPINDLE_DIR_PIN 48 + #elif !BOTH(IS_ULTRA_LCD, IS_NEWPANEL) // Use expansion header if no LCD in use + #define SPINDLE_LASER_ENA_PIN 16 // Pullup or pulldown! + #define SPINDLE_DIR_PIN 17 + #endif +#endif diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h new file mode 100644 index 0000000..6ddd2a5 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h @@ -0,0 +1,96 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "Azteeg X3 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) + #define CASE_LIGHT_PIN 6 // Define before RAMPS pins include +#endif +#define BOARD_INFO_NAME "Azteeg X3" + +// +// Servos +// +#define SERVO0_PIN 44 // SERVO1 port +#define SERVO1_PIN 55 // SERVO2 port + +#include "pins_RAMPS_13.h" + +// +// LCD / Controller +// +#undef STAT_LED_RED_PIN +#undef STAT_LED_BLUE_PIN + +#if ANY(VIKI2, miniVIKI) + + #undef DOGLCD_A0 + #undef DOGLCD_CS + #undef BTN_ENC + #define DOGLCD_A0 31 + #define DOGLCD_CS 32 + #define BTN_ENC 12 + + #define STAT_LED_RED_PIN 64 + #define STAT_LED_BLUE_PIN 63 + +#else + + #define STAT_LED_RED_PIN 6 + #define STAT_LED_BLUE_PIN 11 + +#endif + +// +// Misc +// +#if ENABLED(CASE_LIGHT_ENABLE) && PINS_EXIST(CASE_LIGHT, STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN + #undef STAT_LED_RED_PIN +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3 board +#undef SPINDLE_LASER_ENA_PIN +#undef SPINDLE_DIR_PIN + +#if HAS_CUTTER + #undef SDA // use EXP3 header + #undef SCL + #if SERVO0_PIN == 7 + #undef SERVO0_PIN + #define SERVO0_PIN 11 + #endif + #define SPINDLE_LASER_PWM_PIN 7 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 20 // Pullup! + #define SPINDLE_DIR_PIN 21 +#endif diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h new file mode 100644 index 0000000..9ba6a0c --- /dev/null +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h @@ -0,0 +1,177 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * AZTEEG_X3_PRO (Arduino Mega) pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 5 || E_STEPPERS > 5 + #error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Azteeg X3 Pro" + +// +// RAMPS pins overrides +// + +// +// Servos +// +// Tested this pin with bed leveling on a Delta with 1 servo. +// Physical wire attachment on EXT1: GND, 5V, D47. +// +#define SERVO0_PIN 47 + +// +// Limit Switches +// +#define X_STOP_PIN 3 +#define Y_STOP_PIN 14 +#define Z_STOP_PIN 18 + +#ifndef FAN_PIN + #define FAN_PIN 6 +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) + #define CASE_LIGHT_PIN 44 +#endif + +// +// Import RAMPS 1.4 pins +// +#include "pins_RAMPS.h" + +// DIGIPOT slave addresses +#ifndef DIGIPOT_I2C_ADDRESS_A + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) +#endif +#ifndef DIGIPOT_I2C_ADDRESS_B + #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 18 +#endif + +// +// Steppers +// +#define E2_STEP_PIN 23 +#define E2_DIR_PIN 25 +#define E2_ENABLE_PIN 40 + +#define E3_STEP_PIN 27 +#define E3_DIR_PIN 29 +#define E3_ENABLE_PIN 41 + +#define E4_STEP_PIN 43 +#define E4_DIR_PIN 37 +#define E4_ENABLE_PIN 42 + +// +// Temperature Sensors +// +#define TEMP_2_PIN 12 // Analog Input +#define TEMP_3_PIN 11 // Analog Input +#define TEMP_4_PIN 10 // Analog Input +#define TC1 4 // Analog Input (Thermo couple on Azteeg X3Pro) +#define TC2 5 // Analog Input (Thermo couple on Azteeg X3Pro) + +// +// Heaters / Fans +// +#define HEATER_2_PIN 16 +#define HEATER_3_PIN 17 +#define HEATER_4_PIN 4 +#define HEATER_5_PIN 5 +#define HEATER_6_PIN 6 +#define HEATER_7_PIN 11 + +#ifndef CONTROLLER_FAN_PIN + #define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable) +#endif + +// +// Auto fans +// +#define AUTO_FAN_PIN 5 +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E2_AUTO_FAN_PIN + #define E2_AUTO_FAN_PIN AUTO_FAN_PIN +#endif +#ifndef E3_AUTO_FAN_PIN + #define E3_AUTO_FAN_PIN AUTO_FAN_PIN +#endif + +// +// LCD / Controller +// +#undef BEEPER_PIN +#define BEEPER_PIN 33 + +#if ANY(VIKI2, miniVIKI) + #undef SD_DETECT_PIN + #define SD_DETECT_PIN 49 // For easy adapter board + #undef BEEPER_PIN + #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display +#else + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 +#endif + +// +// Misc. Functions +// +#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN + #undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it + #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments + // as the wiring diagram uses pin 44 for DOGLCD_A0 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3pro board +#undef SPINDLE_LASER_ENA_PIN +#undef SPINDLE_DIR_PIN + +#if HAS_CUTTER // EXP2 header + #if ANY(VIKI2, miniVIKI) + #define BTN_EN2 31 // Pin 7 needed for Spindle PWM + #endif + #define SPINDLE_LASER_PWM_PIN 7 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 20 // Pullup! + #define SPINDLE_DIR_PIN 21 +#endif diff --git a/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h b/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h new file mode 100644 index 0000000..97ef1b4 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h @@ -0,0 +1,49 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * BAM&DICE Due (Arduino Mega) pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "2PrintBeta Due supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "2PrintBeta Due" + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENA_PIN 66 // Pullup or pulldown! +#define SPINDLE_DIR_PIN 67 +#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + +#include "pins_RAMPS.h" + +// +// Temperature Sensors +// +#undef TEMP_0_PIN +#undef TEMP_1_PIN +#define TEMP_0_PIN 9 // Analog Input +#define TEMP_1_PIN 11 // Analog Input diff --git a/Marlin/src/pins/ramps/pins_BIQU_KFB_2.h b/Marlin/src/pins/ramps/pins_BIQU_KFB_2.h new file mode 100644 index 0000000..b31df11 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_BIQU_KFB_2.h @@ -0,0 +1,40 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * KFB 2.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "KFB 2.0 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "KFB 2.0" + +// +// Heaters / Fans +// +// Power outputs BEEF or BEFF +#define MOSFET_D_PIN 7 + +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h b/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h new file mode 100644 index 0000000..f120e9c --- /dev/null +++ b/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h @@ -0,0 +1,126 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * bq ZUM Mega 3D board definition + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "ZUM Mega 3D" + +// +// Heaters / Fans +// +#define RAMPS_D8_PIN 10 +#define RAMPS_D9_PIN 12 +#define RAMPS_D10_PIN 9 +#define MOSFET_D_PIN 7 + +// +// Auto fans +// +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN 11 +#endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN 6 +#endif +#ifndef E2_AUTO_FAN_PIN + #define E2_AUTO_FAN_PIN 6 +#endif +#ifndef E3_AUTO_FAN_PIN + #define E3_AUTO_FAN_PIN 6 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! +#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM +#define SPINDLE_DIR_PIN 42 + +// +// Limit Switches +// +#define X_MAX_PIN 79 // 2 + +// +// Import RAMPS 1.3 pins +// +#include "pins_RAMPS_13.h" + +// +// Z Probe (when not Z_MIN_PIN) +// +#undef Z_MIN_PROBE_PIN +#define Z_MIN_PROBE_PIN 19 // IND_S_5V + +#undef Z_ENABLE_PIN +#define Z_ENABLE_PIN 77 // 62 + +// +// Steppers +// +#define DIGIPOTSS_PIN 22 +#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 } + +// +// Temperature Sensors +// +#undef TEMP_1_PIN +#define TEMP_1_PIN 14 // Analog Input (15) + +#undef TEMP_BED_PIN +#define TEMP_BED_PIN 15 // Analog Input (14) + +// +// Misc. Functions +// +#undef PS_ON_PIN // 12 +#define PS_ON_PIN 81 // External Power Supply + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 44 // Hardware PWM +#endif + +// This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team +// decided to ship the printer only with the probe and no additional Z-min +// endstop and the instruction manual advises the user to connect the probe to +// IND_S_5V the option Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN will not work. +#ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + #undef Z_MIN_PIN + #undef Z_MAX_PIN + #define Z_MIN_PIN 19 // IND_S_5V + #define Z_MAX_PIN 18 // Z-MIN Label +#endif + +// +// Used by the Hephestos 2 heated bed upgrade kit +// +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef HEATER_BED_PIN + #define HEATER_BED_PIN 8 +#endif diff --git a/Marlin/src/pins/ramps/pins_COPYMASTER_3D.h b/Marlin/src/pins/ramps/pins_COPYMASTER_3D.h new file mode 100644 index 0000000..b9eee6b --- /dev/null +++ b/Marlin/src/pins/ramps/pins_COPYMASTER_3D.h @@ -0,0 +1,34 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#define BOARD_INFO_NAME "Copymaster 3D RAMPS" + +#define Z_STEP_PIN 47 +#define Y_MAX_PIN 14 +#define FIL_RUNOUT_PIN 15 +#define SD_DETECT_PIN 66 + +// +// Import RAMPS 1.4 pins +// +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_DAGOMA_F5.h b/Marlin/src/pins/ramps/pins_DAGOMA_F5.h new file mode 100644 index 0000000..07e46ac --- /dev/null +++ b/Marlin/src/pins/ramps/pins_DAGOMA_F5.h @@ -0,0 +1,68 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Dagoma3D F5 supports only 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Dagoma3D F5" + +// +// Endstops +// +#define X_STOP_PIN 2 +#define Y_STOP_PIN 3 +#define Z_STOP_PIN 15 + +#define FIL_RUNOUT_PIN 39 +#if EXTRUDERS > 1 + #define FIL_RUNOUT2_PIN 14 +#endif + +// +// LCD delays +// +#if HAS_MARLINUI_U8GLIB + #define BOARD_ST7920_DELAY_1 DELAY_NS(0) + #define BOARD_ST7920_DELAY_2 DELAY_NS(250) + #define BOARD_ST7920_DELAY_3 DELAY_NS(250) +#endif + +// +// DAC steppers +// +#define HAS_MOTOR_CURRENT_DAC + +#define DAC_STEPPER_ORDER { 0, 1, 2, 3 } + +#define DAC_STEPPER_SENSE 0.11 +#define DAC_STEPPER_ADDRESS 0 +#define DAC_STEPPER_MAX 4096 +#define DAC_STEPPER_VREF 1 +#define DAC_STEPPER_GAIN 0 +#define DAC_OR_ADDRESS 0x00 + +// +// Import default RAMPS 1.4 pins +// +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h new file mode 100644 index 0000000..93ec3d6 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h @@ -0,0 +1,184 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Wanhao Duplicator i3 Plus pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Duplicator i3 Plus" + +// +// Limit Switches +// +#define X_STOP_PIN 54 // PF0 / A0 +#define Y_STOP_PIN 24 // PA2 / AD2 +#define Z_MIN_PIN 23 // PA1 / AD1 +#define Z_MAX_PIN 25 // PA3 / AD3 +#define SERVO0_PIN 40 // PG1 / !RD + +// +// Steppers +// +#define X_STEP_PIN 61 // PF7 / A7 +#define X_DIR_PIN 62 // PK0 / A8 +#define X_ENABLE_PIN 60 // PF6 / A6 + +#define Y_STEP_PIN 64 // PK2 / A10 +#define Y_DIR_PIN 65 // PK3 / A11 +#define Y_ENABLE_PIN 63 // PK1 / A9 + +#define Z_STEP_PIN 67 // PK5 / A13 +#define Z_DIR_PIN 69 // PK7 / A15 +#define Z_ENABLE_PIN 66 // PK4 / A12 +#define Z_MIN_PROBE_PIN 25 // PA3 / AD3 + +#define E0_STEP_PIN 58 // PF4 / A4 +#define E0_DIR_PIN 59 // PF5 / A5 +#define E0_ENABLE_PIN 57 // PF3 / A3 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // PF1 / A1 Analog +#define TEMP_BED_PIN 14 // PK6 / A14 Analog + +// +// Heaters / Fans +// +#define HEATER_0_PIN 4 // PG5 / PWM4 +#define HEATER_BED_PIN 3 // PE5 / PWM3 + +#define FAN_PIN 5 // PE3 / PWM5 + +// +// Misc. Functions +// +#define SDSS 53 // PB0 / SS +#define LED_PIN 13 // PB7 / PWM13 + +#define SD_MISO_PIN 50 // PB3 +#define SD_MOSI_PIN 51 // PB2 +#define SD_SCK_PIN 52 // PB1 + +// +// LCDs and Controllers +// +#if HAS_WIRED_LCD + #if ENABLED(ZONESTAR_LCD) + #define LCD_PINS_RS 2 + #define LCD_PINS_ENABLE 36 + #define LCD_PINS_D4 37 + #define LCD_PINS_D5 34 + #define LCD_PINS_D6 35 + #define LCD_PINS_D7 32 + #define ADC_KEYPAD_PIN 12 // Analog + #endif +#endif + +/** + * == EXT connector == + * + * 2 4 6 8 10 + * #---------------# + * #2 | ° ° ° ° ° | + * #1 | ° ° ° ° ° | + * #---------------# + * 1 3 5 7 9 + * + * ################################## + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################## + * # 1 | 52 / PG1 (!RD) | 40 # + * # 2 | 95 / PF2 (A2) | 56 # + * # 3 | 54 / PC1 (A9) | 36 # + * # 4 | 53 / PC0 (A8) | 37 # + * # 5 | 56 / PC3 (A11) | 34 # + * # 6 | 55 / PC2 (A10) | 35 # + * # 7 | 58 / PC5 (A13) | 32 # + * # 8 | 57 / PC4 (A12) | 33 # + * # 9 | GND | - # + * # 10 | VCC | + # + * ################################## + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * == Z-probe connector == + * + * 1 2 3 + * #---------# + * | ° ° ° | + * #---------# + * + * ################################## + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################## + * # 1 | 24V or 5V | + # + * # 2 | 75 / PA3 (AD3) | 25 # + * # 3 | GND | - # + * ################################## + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * == Y-endstop == == Z-endstop == == Bed temperature == + * + * 1 2 1 2 1 2 + * #------# #------# #------# + * | ° ° | | ° ° | | ° ° | + * #------# #------# #------# + * + * ############### Y ################ ############### Z ################ ############## BED ############### + * # Pin | ATMEGA2560 Pin | Arduino # # Pin | ATMEGA2560 Pin | Arduino # # Pin | ATMEGA2560 Pin | Arduino # + * ################################## ################################## ################################## + * # 1 | GND | - # # 1 | GND | - # # 1 | GND | - # + * # 2 | 76 / PA2 (AD2) | 24 # # 2 | 77 / PA1 (AD1) | 23 # # 2 |83 / PK6 (ADC14)| 14 # + * ################################## ################################## ################################## + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * == SPI connector == + * + * 5 3 1 + * #---------# + * | ° ° ° | + * | ° ° ° | + * #---------# + * 6 4 2 + * + * ################################## + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################## + * # 1 | 22 / PB3 (MISO)| 50 # + * # 2 | VCC | + # + * # 3 | 20 / PB1 (SCK) | 52 # + * # 4 | 21 / PB2 (MOSI)| 51 # + * # 5 | 30 / !RESET | RESET # + * # 6 | GND | - # + * ################################## + * + * Pictogram by Ludy https://github.com/Ludy87 + * See: https://sebastien.andrivet.com/en/posts/wanhao-duplicator-i3-plus-3d-printer/ + */ diff --git a/Marlin/src/pins/ramps/pins_FELIX2.h b/Marlin/src/pins/ramps/pins_FELIX2.h new file mode 100644 index 0000000..e572d3f --- /dev/null +++ b/Marlin/src/pins/ramps/pins_FELIX2.h @@ -0,0 +1,63 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * FELIXprinters v2.0/3.0 (RAMPS v1.4) pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Felix 2.0+ supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Felix 2.0+" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +#include "pins_RAMPS.h" + +// +// Misc. Functions +// +#define SDPOWER_PIN 1 + +#define PS_ON_PIN 12 + +// +// LCD / Controller +// +#if IS_ULTRA_LCD && IS_NEWPANEL + + #define SD_DETECT_PIN 6 + +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not valid with this board +#undef SPINDLE_LASER_ENA_PIN +#undef SPINDLE_DIR_PIN diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h new file mode 100644 index 0000000..5b72478 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h @@ -0,0 +1,197 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Formbot Raptor pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 3 || E_STEPPERS > 3 + #error "Formbot supports up to 3 hotends / E-steppers. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Formbot Raptor" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME +#endif + +// +// Servos +// +#define SERVO0_PIN 11 +#define SERVO1_PIN 6 +#define SERVO2_PIN 5 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#ifndef X_MAX_PIN + #define X_MAX_PIN 2 +#endif +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 53 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 49 +#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#ifndef Z_CS_PIN + #define Z_CS_PIN 40 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 42 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 44 +#endif + +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 43 +#define E2_ENABLE_PIN 44 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card +#else + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) +#endif + +// +// Augmentation for auto-assigning RAMPS plugs +// +#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) + #if HAS_MULTI_HOTEND + #if TEMP_SENSOR_BED + #define IS_RAMPS_EEB + #else + #define IS_RAMPS_EEF + #endif + #elif TEMP_SENSOR_BED + #define IS_RAMPS_EFB + #else + #define IS_RAMPS_EFF + #endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 8 + +#ifndef FAN_PIN + #define FAN_PIN 9 +#endif + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 57 +#endif + +#if !HAS_FILAMENT_SENSOR + #define FAN1_PIN 4 +#endif + +// +// Misc. Functions +// +#ifndef SDSS + #define SDSS 53 +#endif +#define LED_PIN 13 +#define LED4_PIN 5 + +// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector +#define FILWIDTH_PIN 5 // Analog Input + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 +#endif + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 5 +#endif + +// +// LCD / Controller +// +// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER +// +#if IS_RRD_SC + #define BEEPER_PIN 37 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 +#endif diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h new file mode 100644 index 0000000..843eadb --- /dev/null +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h @@ -0,0 +1,68 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Formbot Raptor 2 pin assignments + */ + +#define BOARD_INFO_NAME "Formbot Raptor2" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +#define FAN_PIN 6 + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 22 +#endif + +#include "pins_FORMBOT_RAPTOR.h" + +#define GREEDY_PANEL ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD) + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) + #if !NUM_SERVOS // Try to use servo connector first + #define SPINDLE_LASER_ENA_PIN 6 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM + #define SPINDLE_DIR_PIN 5 + #elif !GREEDY_PANEL // Try to use AUX2 + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 + #endif +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) + #if NUM_SERVOS <= 1 // Try to use servo connector first + #define CASE_LIGHT_PIN 6 // Hardware PWM + #elif !GREEDY_PANEL // Try to use AUX2 + #define CASE_LIGHT_PIN 44 // Hardware PWM + #endif +#endif + +#undef GREEDY_PANEL + +#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && (CASE_LIGHT_PIN == SPINDLE_LASER_ENA_PIN || CASE_LIGHT_PIN == SPINDLE_LASER_PWM_PIN) + #error "CASE_LIGHT_PIN conflicts with a Spindle / Laser pin." +#endif diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h new file mode 100644 index 0000000..81b6ea1 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h @@ -0,0 +1,210 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Formbot pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Formbot" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +// +// Servos +// +#define SERVO0_PIN 11 +#define SERVO1_PIN -1 // was 6 +#define SERVO2_PIN -1 // was 5 +#define SERVO3_PIN -1 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#ifndef X_MAX_PIN + #define X_MAX_PIN 2 +#endif +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 53 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 49 +#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#ifndef Z_CS_PIN + #define Z_CS_PIN 40 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 42 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 44 +#endif + +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 43 +#define E2_ENABLE_PIN 44 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 3 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card +#else + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) +#endif + +// +// Augmentation for auto-assigning RAMPS plugs +// +#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) + #if HAS_MULTI_HOTEND + #if TEMP_SENSOR_BED + #define IS_RAMPS_EEB + #else + #define IS_RAMPS_EEF + #endif + #elif TEMP_SENSOR_BED + #define IS_RAMPS_EFB + #else + #define IS_RAMPS_EFF + #endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 58 + +#define FAN_PIN 9 + +#if HAS_FILAMENT_SENSOR + #define FIL_RUNOUT_PIN 4 + //#define FIL_RUNOUT2_PIN -1 +#else + // Though defined as a fan pin, it is utilized as a dedicated laser pin by Formbot. + #define FAN1_PIN 4 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#ifndef LED_PIN + #define LED_PIN 13 // The Formbot v 1 board has almost no unassigned pins on it. The Board's LED +#endif // is a good place to get a signal to control the Max7219 LED Matrix. + +// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector +#define FILWIDTH_PIN 5 // Analog Input + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 +#endif + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 8 +#endif + +// +// LCD / Controller +// +// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER +// +#if IS_RRD_SC + #ifndef BEEPER_PIN + #define BEEPER_PIN 37 + #endif + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + + // Allow MAX7219 to steal the KILL pin + #if !defined(KILL_PIN) && MAX7219_CLK_PIN != 41 && MAX7219_DIN_PIN != 41 && MAX7219_LOAD_PIN != 41 + #define KILL_PIN 41 + #endif + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 +#endif + +#if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(200) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(200) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(200) + #endif +#endif diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h new file mode 100644 index 0000000..a97b0d2 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h @@ -0,0 +1,175 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Formbot pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Formbot" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +// +// Servos +// +#define SERVO0_PIN 11 +#define SERVO1_PIN -1 // was 6 +#define SERVO2_PIN -1 +#define SERVO3_PIN -1 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#ifndef X_MAX_PIN + #define X_MAX_PIN 2 +#endif +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 53 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 49 +#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#ifndef Z_CS_PIN + #define Z_CS_PIN 40 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 42 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 44 +#endif + +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 43 +#define E2_ENABLE_PIN 44 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card +#else + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 8 + +#define FAN_PIN 9 +#define FAN1_PIN 12 + +#define NUM_RUNOUT_SENSORS 2 +#define FIL_RUNOUT_PIN 22 +#define FIL_RUNOUT2_PIN 21 + +// +// Misc. Functions +// +#define SDSS 53 + +#ifndef LED_PIN + #define LED_PIN 13 +#endif + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 5 +#endif + +#define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 4 // Pullup! + +// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector +#define FILWIDTH_PIN 5 // Analog Input + +// +// LCD / Controller +// +// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER +// +#if IS_RRD_SC + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + #ifndef KILL_PIN + #define KILL_PIN 41 + #endif + #ifndef BEEPER_PIN + #define BEEPER_PIN 37 + #endif +#endif diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h new file mode 100644 index 0000000..6133a64 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h @@ -0,0 +1,301 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +// +// FYSETC F6 1.3 (and 1.4) pin assignments +// + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'FYSETC F6' in 'Tools > Board.'" +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "FYSETC F6 1.3" +#endif + +#define RESET_PIN 30 +#define SPI_FLASH_CS 83 + +// +// Servos +// +#define SERVO0_PIN 13 +#define SERVO1_PIN 11 // (PS_ON_PIN) +#define SERVO2_PIN 10 // (FIL_RUNOUT_PIN) +#define SERVO3_PIN 4 // (RGB_LED_G_PIN) + +// +// Limit Switches +// +#define X_MIN_PIN 63 +#define X_MAX_PIN 64 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 12 +#ifndef Z_MAX_PIN + #define Z_MAX_PIN 9 +#endif + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN SERVO2_PIN +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 9 // Servos pin +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 70 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 39 +#endif + +#define Z_STEP_PIN 43 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 58 +#ifndef Z_CS_PIN + #define Z_CS_PIN 74 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 47 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 32 +#endif + +#define E2_STEP_PIN 59 +#define E2_DIR_PIN 57 +#define E2_ENABLE_PIN 40 +#ifndef E2_CS_PIN + #define E2_CS_PIN 42 +#endif + +// +// Sensorless homing DIAG pin is not directly connected to the MCU. Close +// the jumper next to the limit switch socket when using sensorless homing. +// + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Software serial communication pins. + * At the moment, F6 rx pins are not pc interrupt pins + */ + #ifndef X_SERIAL_RX_PIN + #define X_SERIAL_RX_PIN -1 // 71 + #endif + #ifndef X_SERIAL_TX_PIN + #define X_SERIAL_TX_PIN 72 + #endif + #ifndef Y_SERIAL_RX_PIN + #define Y_SERIAL_RX_PIN -1 // 73 + #endif + #ifndef Y_SERIAL_TX_PIN + #define Y_SERIAL_TX_PIN 75 + #endif + #ifndef Z_SERIAL_RX_PIN + #define Z_SERIAL_RX_PIN -1 // 78 + #endif + #ifndef Z_SERIAL_TX_PIN + #define Z_SERIAL_TX_PIN 79 + #endif + #ifndef E0_SERIAL_RX_PIN + #define E0_SERIAL_RX_PIN -1 // 76 + #endif + #ifndef E0_SERIAL_TX_PIN + #define E0_SERIAL_TX_PIN 77 + #endif + #ifndef E1_SERIAL_RX_PIN + #define E1_SERIAL_RX_PIN -1 // 80 + #endif + #ifndef E1_SERIAL_TX_PIN + #define E1_SERIAL_TX_PIN 81 + #endif + #ifndef E2_SERIAL_RX_PIN + #define E2_SERIAL_RX_PIN -1 // 22 + #endif + #ifndef E2_SERIAL_TX_PIN + #define E2_SERIAL_TX_PIN 82 + #endif +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 12 // Analog Input +#define TEMP_1_PIN 13 // Analog Input +#define TEMP_2_PIN 14 // Analog Input +#define TEMP_BED_PIN 15 // Analog Input + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 9 // Analog Input on X+ endstop +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 5 +#define HEATER_1_PIN 6 +#define HEATER_2_PIN 7 +#define HEATER_BED_PIN 8 + +#define FAN_PIN 44 +#define FAN1_PIN 45 +#define FAN2_PIN 46 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define KILL_PIN 41 + +#ifndef PS_ON_PIN + #define PS_ON_PIN SERVO1_PIN +#endif + +/** + * ----- ----- + * 5V/D41 | · · | GND 5V | · · | GND + * RESET | · · | D49 (SD_DETECT) (LCD_D7) D29 | · · | D27 (LCD_D6) + * (MOSI) D51 | · · D33 (BTN_EN2) (LCD_D5) D25 | · · D23 (LCD_D4) + * (SD_SS) D53 | · · | D31 (BTN_EN1) (LCD_RS) D16 | · · | D17 (LCD_EN) + * (SCK) D52 | · · | D50 (MISO) (BTN_ENC) D35 | · · | D37 (BEEPER) + * ----- ----- + * EXP2 EXP1 + */ + +// +// LCDs and Controllers +// +#define SD_DETECT_PIN 49 + +#if ENABLED(FYSETC_242_OLED_12864) + #define BTN_EN1 37 + #define BTN_EN2 29 + #define BTN_ENC 35 + #define BEEPER_PIN 31 + + #define LCD_PINS_DC 25 + #define LCD_PINS_RS 33 + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 23 + #define DOGLCD_SCK 17 + #define DOGLCD_A0 LCD_PINS_DC + + #undef KILL_PIN + #define NEOPIXEL_PIN 27 + +#else + #define BEEPER_PIN 37 + + #if ENABLED(FYSETC_MINI_12864) + // + // See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 + // + #define DOGLCD_A0 16 + #define DOGLCD_CS 17 + + #if ENABLED(FYSETC_GENERIC_12864_1_1) + #define LCD_BACKLIGHT_PIN 27 + #endif + + #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + // Seems to work best if left open. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 25 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN 27 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN 29 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN 25 + #endif + + #elif HAS_MARLINUI_U8GLIB || HAS_MARLINUI_HD44780 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + #if ENABLED(MKS_MINI_12864) + #define DOGLCD_CS 25 + #define DOGLCD_A0 27 + #endif + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #if IS_NEWPANEL + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #endif +#endif + +#ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 3 +#endif +#ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN 4 +#endif +#ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN 9 +#endif +#ifndef RGB_LED_W_PIN + #define RGB_LED_W_PIN -1 +#endif diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h new file mode 100644 index 0000000..4280204 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h @@ -0,0 +1,50 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +// +// FYSETC F6 v1.4 pin assignments +// + +#define BOARD_INFO_NAME "FYSETC F6 1.4" + +#define Z_MAX_PIN 2 + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + */ + #define X_SERIAL_RX_PIN 72 + #define X_SERIAL_TX_PIN 71 + #define Y_SERIAL_RX_PIN 73 + #define Y_SERIAL_TX_PIN 78 + #define Z_SERIAL_RX_PIN 75 + #define Z_SERIAL_TX_PIN 79 + #define E0_SERIAL_RX_PIN 77 + #define E0_SERIAL_TX_PIN 81 + #define E1_SERIAL_RX_PIN 76 + #define E1_SERIAL_TX_PIN 80 + #define E2_SERIAL_RX_PIN 62 + #define E2_SERIAL_TX_PIN 82 +#endif + +#include "pins_FYSETC_F6_13.h" diff --git a/Marlin/src/pins/ramps/pins_K8200.h b/Marlin/src/pins/ramps/pins_K8200.h new file mode 100644 index 0000000..df685e0 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_K8200.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * K8200 Arduino Mega with RAMPS v1.3 pin assignments + * Identical to 3DRAG + */ + +#define BOARD_INFO_NAME "Velleman K8200" +#define DEFAULT_MACHINE_NAME "K8200" +#define DEFAULT_SOURCE_CODE_URL "github.com/CONSULitAS/Marlin-K8200" + +#include "pins_3DRAG.h" diff --git a/Marlin/src/pins/ramps/pins_K8400.h b/Marlin/src/pins/ramps/pins_K8400.h new file mode 100644 index 0000000..af68792 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_K8400.h @@ -0,0 +1,73 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Velleman K8400 (Vertex) + * 3DRAG clone + * + * K8400 has some minor differences over a normal 3Drag: + * - No X/Y max endstops + * - Second extruder step pin has moved + * - No power supply control + * - Second heater has moved pin + */ + +#define BOARD_INFO_NAME "K8400" +#define DEFAULT_MACHINE_NAME "Vertex" + +#include "pins_3DRAG.h" + +// +// Limit Switches +// +#define X_STOP_PIN 3 +#define Y_STOP_PIN 14 + +#undef X_MIN_PIN +#undef X_MAX_PIN +#undef Y_MIN_PIN +#undef Y_MAX_PIN + +// +// Steppers +// +#undef E1_STEP_PIN +#define E1_STEP_PIN 32 + +// +// Heaters / Fans +// +#undef HEATER_1_PIN +#define HEATER_1_PIN 11 + +// +// Misc. Functions +// +#undef PS_ON_PIN +#undef KILL_PIN +#undef SD_DETECT_PIN + +#if Z_STEP_PIN == 26 + #undef Z_STEP_PIN + #define Z_STEP_PIN 32 +#endif diff --git a/Marlin/src/pins/ramps/pins_K8600.h b/Marlin/src/pins/ramps/pins_K8600.h new file mode 100644 index 0000000..1a396b2 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_K8600.h @@ -0,0 +1,127 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +/** + * VERTEX NANO Arduino Mega with RAMPS EFB v1.4 pin assignments. + */ + +#if HOTENDS > 1 + #error "Only 1 hotend is supported for Vertex Nano." +#endif + +#define BOARD_INFO_NAME "K8600" +#define DEFAULT_MACHINE_NAME "Vertex Nano" + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#define Y_MAX_PIN 14 +#define Z_MAX_PIN 18 +#define Z_MIN_PIN -1 + +// +// Heaters / Fans +// +#define FAN_PIN 8 + +// +// Misc. Functions +// +#define CASE_LIGHT_PIN 7 + +// +// Other RAMPS pins +// +#define IS_RAMPS_EFB // Override autodetection. Bed will be undefined. +#include "pins_RAMPS.h" + +// +// Steppers +// +#undef X_STEP_PIN +#undef X_DIR_PIN +#undef X_ENABLE_PIN +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 + +#undef Y_STEP_PIN +#undef Y_DIR_PIN +#undef Y_ENABLE_PIN +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 + +#undef Z_ENABLE_PIN +#define Z_ENABLE_PIN 63 + +#undef E0_STEP_PIN +#undef E0_DIR_PIN +#undef E0_ENABLE_PIN +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 + +// +// Heaters / Fans +// +#undef HEATER_BED_PIN + +// +// Misc. Functions +// +#undef SDSS +#define SDSS 25 // 53 + +// +// LCD / Controller +// +#if IS_ULTRA_LCD && IS_NEWPANEL + #undef BEEPER_PIN + + #undef LCD_PINS_RS + #undef LCD_PINS_ENABLE + #undef LCD_PINS_D4 + #undef LCD_PINS_D5 + #undef LCD_PINS_D6 + #undef LCD_PINS_D7 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 37 + #define LCD_PINS_D5 35 + #define LCD_PINS_D6 33 + #define LCD_PINS_D7 31 + + // Buttons + #undef BTN_EN1 + #undef BTN_EN2 + #undef BTN_ENC + #define BTN_EN1 17 + #define BTN_EN2 16 + #define BTN_ENC 23 + +#else + + #define BEEPER_PIN 33 + +#endif diff --git a/Marlin/src/pins/ramps/pins_K8800.h b/Marlin/src/pins/ramps/pins_K8800.h new file mode 100644 index 0000000..5388c96 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_K8800.h @@ -0,0 +1,122 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Velleman K8800 (Vertex) + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "K8800" +#define DEFAULT_MACHINE_NAME "Vertex Delta" + +//#define LCD_SCREEN_ROT_180 + +// +// Limit Switches +// +#define X_STOP_PIN 3 +#define Y_STOP_PIN 14 +#define Z_STOP_PIN 66 + +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 68 +#endif + +#define FIL_RUNOUT_PIN 69 // PK7 + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 63 + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define FAN_PIN 8 +#define CONTROLLER_FAN_PIN 9 + +// +// Misc. Functions +// +#define KILL_PIN 20 // PD1 +#define CASE_LIGHT_PIN 7 + +// +// SD Card +// +#define SDSS 25 +#define SD_DETECT_PIN 21 // PD0 + +// +// LCD / Controller +// +#define BEEPER_PIN 6 + +#if HAS_WIRED_LCD + + #define LCD_SDSS 53 + + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 + + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 37 + #define LCD_PINS_D5 35 + #define LCD_PINS_D6 33 + #define LCD_PINS_D7 31 + + #define LCD_CONTRAST_MIN 0 + #define LCD_CONTRAST_MAX 100 + #define DEFAULT_LCD_CONTRAST 30 + + #if IS_NEWPANEL + #define BTN_EN1 17 + #define BTN_EN2 16 + #define BTN_ENC 23 + #endif + +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h b/Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h new file mode 100644 index 0000000..6fcb7b9 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h @@ -0,0 +1,118 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Longer3D LK1/LK4/LK5 Pro board pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "Longer3D LGT KIT V1.0 board only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 + #warning "Serial 1 is originally reserved to DGUS LCD." +#endif +#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 + #warning "Serial 2 has no connector. Hardware changes may be required to use it." +#endif +#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 + #define CHANGE_Y_LIMIT_PINS + #warning "Serial 3 is originally reserved to Y limit switches. Hardware changes are required to use it." +#endif + +// Custom flags and defines for the build +//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__ + +#define BOARD_INFO_NAME "LGT KIT V1.0" + +// +// Servos +// +#if !MB(LONGER3D_LK1_PRO) + #define SERVO0_PIN 7 +#endif +#define SERVO1_PIN -1 +#define SERVO2_PIN -1 +#define SERVO3_PIN -1 + +// +// Limit Switches +// +#define X_STOP_PIN 3 + +#ifdef CHANGE_Y_LIMIT_PINS + #define Y_STOP_PIN 37 +#else + #define Y_MIN_PIN 14 + #define Y_MAX_PIN 15 +#endif + +#if !MB(LONGER3D_LK1_PRO) + #ifdef CHANGE_Y_LIMIT_PINS + #define Z_STOP_PIN 35 + #else + #define Z_MIN_PIN 35 + #define Z_MAX_PIN 37 + #endif +#else + #define Z_MIN_PIN 11 + #define Z_MAX_PIN 37 +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#define Z_MIN_PROBE_PIN -1 + +// +// Misc. Functions +// +#define SD_DETECT_PIN 49 +#define FIL_RUNOUT_PIN 2 + +// +// Other RAMPS 1.3 pins +// +#define IS_RAMPS_EFB // Override autodetection. Bed will be undefined. +#include "pins_RAMPS_13.h" + +// +// Steppers +// +#undef E1_STEP_PIN +#undef E1_DIR_PIN +#undef E1_ENABLE_PIN +#undef E1_CS_PIN + +// +// Temperature Sensors +// +#undef TEMP_1_PIN + +// +// Průša i3 MK2 Multiplexer Support +// +#undef E_MUX2_PIN +#undef CHANGE_Y_LIMIT_PINS diff --git a/Marlin/src/pins/ramps/pins_MAKEBOARD_MINI.h b/Marlin/src/pins/ramps/pins_MAKEBOARD_MINI.h new file mode 100644 index 0000000..a42dba8 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MAKEBOARD_MINI.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#define BOARD_INFO_NAME "MAKEboard Mini" + +// +// Only 3 Limit Switch plugs on Micromake C1 +// +#define X_STOP_PIN 2 +#define Y_STOP_PIN 15 +#define Z_STOP_PIN 19 + +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_10.h b/Marlin/src/pins/ramps/pins_MKS_BASE_10.h new file mode 100644 index 0000000..0be5865 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_10.h @@ -0,0 +1,37 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS BASE 1.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments + * + * Rev B - Override pin definitions for CASE_LIGHT and M3/M4/M5 spindle control + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS BASE 1.0" +#define MKS_BASE_VERSION 10 + +#include "pins_MKS_BASE_common.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_14.h b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h new file mode 100644 index 0000000..3612f9b --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h @@ -0,0 +1,170 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS BASE 1.4" +#define MKS_BASE_VERSION 14 + +// +// Heaters / Fans +// +#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9 + +// Other Mods + +#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12 +#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM +#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup! +#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX + +#ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 50 +#endif +#ifndef RGB_LED_R_PIN + #define RGB_LED_G_PIN 51 +#endif +#ifndef RGB_LED_R_PIN + #define RGB_LED_B_PIN 52 +#endif + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11 +#endif + +#include "pins_MKS_BASE_common.h" + +/* + Available connectors on MKS BASE v1.4 + + ======= + | GND | + |-----| E0 + | 10 | (10) PB4 ** Pin23 ** PWM10 + |-----| + | GND | + |-----| E1 + | 7 | ( 7) PH4 ** Pin16 ** PWM7 + |-----| + | GND | + |-----| FAN + | 9 | ( 9) PH6 ** Pin18 ** PWM9 + ======= + + ======= + | GND | + |-----| Heated Bed + | 8 | ( 8) PH5 ** Pin17 ** PWM8 + ======= + + ========== + | 12-24V | + |--------| Power + | GND | + ========== + + XS3 Connector + ================= + | 65 | GND | 5V | (65) PK3 ** Pin86 ** A11 + |----|-----|----| + | 66 | GND | 5V | (66) PK4 ** Pin85 ** A12 + ================= + + Servos Connector + ================= + | 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11 + |----|-----|----| + | 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12 + ================= + + ICSP + ================= + | 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI + |----|----|-----| + | 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO + ================= (52) PB1 ** Pin20 ** SPI_SCK + + XS6/AUX-1 Connector + ====================== + | 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA + |----|-----|----|----| + | 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO + ====================== (51) PB2 ** Pin21 ** SPI_MOSI + (52) PB1 ** Pin20 ** SPI_SCK + (21) PD0 ** Pin43 ** I2C_SCL + + Temperature + ================================== + | GND | 69 | GND | 68 | GND | 67 | + ================================== + (69) PK7 ** Pin82 ** A15 + (68) PK6 ** Pin83 ** A14 + (67) PK5 ** Pin84 ** A13 + + Limit Switches + ============ + | 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2 + |----|-----| + | 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3 + |----|-----| + | 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX + |----|-----| + | 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX + |----|-----| + | 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX + |----|-----| + | 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX + ============ + + EXP1 + ============ + | 37 | 35 | (37) PC0 ** Pin53 ** D37 + |-----|----| (35) PC2 ** Pin55 ** D35 + | 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX + |-----|----| (16) PH1 ** Pin13 ** USART2_TX + | 23 | 25 | (23) PA1 ** Pin77 ** D23 + |-----|----| (25) PA3 ** Pin75 ** D25 + | 27 | 29 | (27) PA5 ** Pin73 ** D27 + |-----|----| (29) PA7 ** Pin71 ** D29 + | GND | 5V | + ============ + + EXP2 + ============ + | 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO + |-----|----| (52) PB1 ** Pin20 ** SPI_SCK + | 31 | 53 | (31) PC6 ** Pin59 ** D31 + |-----|----| (53) PB0 ** Pin19 ** SPI_SS + | 33 | 51 | (33) PC4 ** Pin57 ** D33 + |-----|----| (51) PB2 ** Pin21 ** SPI_MOSI + | 49 | 41 | (49) PL0 ** Pin35 ** D49 + |-----|----| (41) PG0 ** Pin51 ** D41 + | GND | NC | + ============ +*/ diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_15.h b/Marlin/src/pins/ramps/pins_MKS_BASE_15.h new file mode 100644 index 0000000..9e670d1 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_15.h @@ -0,0 +1,35 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS BASE v1.5 with A4982 stepper drivers and digital micro-stepping + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS BASE 1.5 only supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS BASE 1.5" +#define MKS_BASE_VERSION 15 + +#include "pins_MKS_BASE_common.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_16.h b/Marlin/src/pins/ramps/pins_MKS_BASE_16.h new file mode 100644 index 0000000..a4dfca2 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_16.h @@ -0,0 +1,59 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS BASE v1.6 with A4982 stepper drivers and digital micro-stepping + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS BASE 1.6 only supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS BASE 1.6" +#define MKS_BASE_VERSION 16 + +// +// Servos +// +#define SERVO1_PIN 12 // Digital 12 / Pin 25 + +// +// Omitted RAMPS pins +// +#ifndef SERVO2_PIN + #define SERVO2_PIN -1 +#endif +#ifndef SERVO3_PIN + #define SERVO3_PIN -1 +#endif +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN -1 +#endif +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN -1 +#endif +#ifndef PS_ON_PIN + #define PS_ON_PIN -1 +#endif + +#include "pins_MKS_BASE_common.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_HEROIC.h b/Marlin/src/pins/ramps/pins_MKS_BASE_HEROIC.h new file mode 100644 index 0000000..3ce138b --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_HEROIC.h @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS BASE with Heroic HR4982 stepper drivers + */ + +#include "pins_MKS_BASE_15.h" + +/** + * Some new boards use HR4982 (Heroic) instead of the A4982 (Allegro) stepper drivers. + * Most the functionality is similar, the HR variant obviously doesn't work with diode + * smoothers (no fast decay). And the Heroic has a 128 µStepping mode where the A4982 + * is doing quarter steps (MS1=0, MS2=1). + */ +#define HEROIC_STEPPER_DRIVERS diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_common.h b/Marlin/src/pins/ramps/pins_MKS_BASE_common.h new file mode 100644 index 0000000..9047a4b --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_common.h @@ -0,0 +1,75 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS BASE – Arduino Mega2560 with RAMPS pin assignments + */ + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS BASE" +#endif + +#if MKS_BASE_VERSION >= 14 + // + // Heaters / Fans + // + // Power outputs EFBF or EFBE + #define MOSFET_D_PIN 7 + + // + // M3/M4/M5 - Spindle/Laser Control + // + #if HAS_CUTTER + #define SPINDLE_LASER_PWM_PIN 2 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 15 // Pullup! + #define SPINDLE_DIR_PIN 19 + #endif + + #ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 2 + #endif + +#endif + +// +// Microstepping pins +// +#if MKS_BASE_VERSION >= 14 // |===== 1.4 =====|===== 1.5+ =====| + #define X_MS1_PIN 5 // PE3 | Pin 5 | PWM5 | | D3 | SERVO2_PIN + #define X_MS2_PIN 6 // PH3 | Pin 15 | PWM6 | Pin 14 | D6 | SERVO1_PIN + #define Y_MS1_PIN 59 // PF5 | Pin 92 | A5 | | | + #define Y_MS2_PIN 58 // PF4 | Pin 93 | A4 | | | + #define Z_MS1_PIN 22 // PA0 | Pin 78 | D22 | | | + #define Z_MS2_PIN 39 // PG2 | Pin 70 | D39 | | | + #if MKS_BASE_VERSION == 14 + #define E0_MS1_PIN 64 // PK2 | Pin 87 | A10 | | | + #define E0_MS2_PIN 63 // PK1 | Pin 88 | A9 | | | + #else + #define E0_MS1_PIN 63 // PK1 | | | Pin 86 | A9 | + #define E0_MS2_PIN 64 // PK2 | | | Pin 87 | A10 | + #endif + #define E1_MS1_PIN 57 // PF3 | Pin 94 | A3 | Pin 93 | A3 | + #define E1_MS2_PIN 4 // PG5 | Pin 1 | PWM4 | | D4 | SERVO3_PIN +#endif + +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h new file mode 100644 index 0000000..08dd0f4 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h @@ -0,0 +1,147 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS v1.4 adjusted pin assignments + * + * MKS GEN v1.3 (Extruder, Fan, Bed) + * MKS GEN v1.3 (Extruder, Extruder, Fan, Bed) + * MKS GEN v1.4 (Extruder, Fan, Bed) + * MKS GEN v1.4 (Extruder, Extruder, Fan, Bed) + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS GEN 1.3/1.4 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS GEN >= v1.3" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +// +// PSU / SERVO +// +// If PSU_CONTROL is specified, always hijack Servo 3 +// +#if ENABLED(PSU_CONTROL) + #define SERVO3_PIN -1 + #define PS_ON_PIN 4 +#endif + +#include "pins_RAMPS.h" + +// +// LCD / Controller +// +#if ANY(VIKI2, miniVIKI) + /** + * VIKI2 Has two groups of wires with... + * + * +Vin + Input supply, requires 120ma for LCD and mSD card + * GND Ground Pin + * MOSI Data input for LCD and SD + * MISO Data output for SD + * SCK Clock for LCD and SD + * AO Reg. Sel for LCD + * LCS Chip Select for LCD + * SDCS Chip Select for SD + * SDCD Card Detect pin for SD + * ENCA Encoder output A + * ENCB Encoder output B + * ENCBTN Encoder button switch + * + * BTN Panel mounted button switch + * BUZZER Piezo buzzer + * BLUE-LED Blue LED ring pin (3 to 5v, mosfet buffered) + * RED-LED Red LED ring pin (3 to 5v, mosfet buffered) + * + * This configuration uses the following arrangement: + * + * EXP1 D37 = EN2 D35 = EN1 EXP2 D50 = MISO D52 = SCK + * D17 = BLUE D16 = RED D31 = ENC D53 = SDCS + * D23 = KILL D25 = BUZZ D33 = --- D51 = MOSI + * D27 = A0 D29 = LCS D49 = SDCD RST = --- + * GND = GND 5V = 5V GND = --- D41 = --- + */ + + #undef BTN_EN1 + #undef BTN_EN2 + #undef BTN_ENC + #undef DOGLCD_A0 + #undef DOGLCD_CS + #undef SD_DETECT_PIN + #undef BEEPER_PIN + #undef KILL_PIN + #undef STAT_LED_RED_PIN + #undef STAT_LED_BLUE_PIN + + // + // VIKI2 12-wire lead + // + + // orange/white SDCD + #define SD_DETECT_PIN 49 + + // white ENCA + #define BTN_EN1 35 + + // green ENCB + #define BTN_EN2 37 + + // purple ENCBTN + #define BTN_ENC 31 + + // brown A0 + #define DOGLCD_A0 27 + + // green/white LCS + #define DOGLCD_CS 29 + + // 50 gray MISO + // 51 yellow MOSI + // 52 orange SCK + + // blue SDCS + //#define SDSS 53 + + // + // VIKI2 4-wire lead + // + + // blue BTN + #define KILL_PIN 23 + + // green BUZZER + #define BEEPER_PIN 25 + + // yellow RED-LED + #define STAT_LED_RED_PIN 16 + + // white BLUE-LED + #define STAT_LED_BLUE_PIN 17 + +#endif diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L.h new file mode 100644 index 0000000..522a34c --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L.h @@ -0,0 +1,53 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS GEN L – Arduino Mega2560 with RAMPS v1.4 pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS GEN L supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS GEN L" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +// +// CS Pins wired to avoid conflict with the LCD +// See https://www.thingiverse.com/asset:66604 +// + +#ifndef X_CS_PIN + #define X_CS_PIN 59 +#endif + +#ifndef Y_CS_PIN + #define Y_CS_PIN 63 +#endif + +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h new file mode 100644 index 0000000..20f3dec --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h @@ -0,0 +1,89 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS GEN L V2 – Arduino Mega2560 with RAMPS v1.4 pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS GEN L V2 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS GEN L V2" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +// +// CS Pins wired to avoid conflict with the LCD +// See https://www.thingiverse.com/asset:66604 +// + +#ifndef X_CS_PIN + #define X_CS_PIN 63 +#endif + +#ifndef Y_CS_PIN + #define Y_CS_PIN 64 +#endif + +#ifndef Z_CS_PIN + #define Z_CS_PIN 65 +#endif + +#ifndef E0_CS_PIN + #define E0_CS_PIN 66 +#endif + +#ifndef E1_CS_PIN + #define E1_CS_PIN 21 +#endif + +// TMC2130 Diag Pins (currently just for reference) +#define X_DIAG_PIN 3 +#define Y_DIAG_PIN 14 +#define Z_DIAG_PIN 18 +#define E0_DIAG_PIN 2 +#define E1_DIAG_PIN 15 + +#ifndef SERVO1_PIN + #define SERVO1_PIN 12 +#endif +#ifndef SERVO2_PIN + #define SERVO2_PIN 39 +#endif +#ifndef SERVO3_PIN + #define SERVO3_PIN 32 +#endif + +#ifndef E1_SERIAL_TX_PIN + #define E1_SERIAL_TX_PIN 20 +#endif +#ifndef E1_SERIAL_RX_PIN + #define E1_SERIAL_RX_PIN 21 +#endif + +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h new file mode 100644 index 0000000..24e04a3 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h @@ -0,0 +1,85 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS GEN L V2 – Arduino Mega2560 with RAMPS v1.4 pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS GEN L V2.1 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS GEN L V2.1" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +// +// CS Pins wired to avoid conflict with the LCD +// See https://www.thingiverse.com/asset:66604 +// + +#ifndef X_CS_PIN + #define X_CS_PIN 63 +#endif +#ifndef Y_CS_PIN + #define Y_CS_PIN 64 +#endif +#ifndef Z_CS_PIN + #define Z_CS_PIN 65 +#endif +#ifndef E0_CS_PIN + #define E0_CS_PIN 66 +#endif +#ifndef E1_CS_PIN + #define E1_CS_PIN 12 +#endif + +// TMC2130 Diag Pins (currently just for reference) +#define X_DIAG_PIN 3 +#define Y_DIAG_PIN 14 +#define Z_DIAG_PIN 18 +#define E0_DIAG_PIN 2 +#define E1_DIAG_PIN 15 + +#ifndef SERVO1_PIN + #define SERVO1_PIN 21 +#endif +#ifndef SERVO2_PIN + #define SERVO2_PIN 39 +#endif +#ifndef SERVO3_PIN + #define SERVO3_PIN 32 +#endif + +#ifndef E1_SERIAL_TX_PIN + #define E1_SERIAL_TX_PIN 20 +#endif +#ifndef E1_SERIAL_RX_PIN + #define E1_SERIAL_RX_PIN 12 +#endif + +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_ORTUR_4.h b/Marlin/src/pins/ramps/pins_ORTUR_4.h new file mode 100644 index 0000000..e79973e --- /dev/null +++ b/Marlin/src/pins/ramps/pins_ORTUR_4.h @@ -0,0 +1,116 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Ortur 4 Arduino Mega based on RAMPS v1.4 pin assignments + */ + +#define BOARD_INFO_NAME "Ortur 4.3" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +// +// Servos +// +#define SERVO0_PIN 29 + +// +// Limit Switches +// +#define X_MAX_PIN 18 +#define Z_MIN_PIN 63 + +#define Z_MIN_PROBE_PIN 2 +#define FIL_RUNOUT_PIN 59 + +// +// Steppers +// +#define E0_CS_PIN 44 +#define E1_CS_PIN 42 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 15 // Analog Input +#define TEMP_1_PIN 13 // Analog Input + +// +// Software serial +// +#define X_SERIAL_TX_PIN 59 +#define X_SERIAL_RX_PIN 63 + +#define Y_SERIAL_TX_PIN 64 +#define Y_SERIAL_RX_PIN 40 + +#define Z_SERIAL_TX_PIN 44 +#define Z_SERIAL_RX_PIN 42 + +#define E0_SERIAL_TX_PIN 66 +#define E0_SERIAL_RX_PIN 65 + +#include "pins_RAMPS.h" + +// +// Steppers +// +#undef E0_STEP_PIN +#undef E0_DIR_PIN +#undef E0_ENABLE_PIN +#define E0_STEP_PIN 36 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 + +#undef E1_STEP_PIN +#undef E1_DIR_PIN +#undef E1_ENABLE_PIN +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 24 + +// +// LCD / Controller +// +#if IS_RRD_FG_SC + #undef BEEPER_PIN + #define BEEPER_PIN 35 + + #undef LCD_PINS_RS + #undef LCD_PINS_ENABLE + #undef LCD_PINS_D4 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 23 + #define LCD_PINS_D4 37 + + #undef LCD_SDSS + #undef SD_DETECT_PIN + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 + + #undef BTN_EN1 + #undef BTN_EN2 + #undef BTN_ENC + #define BTN_EN1 29 + #define BTN_EN2 25 + #define BTN_ENC 16 +#endif diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h new file mode 100644 index 0000000..5bcd877 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -0,0 +1,781 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments + * + * Applies to the following boards: + * + * RAMPS_14_EFB (Hotend, Fan, Bed) + * RAMPS_14_EEB (Hotend0, Hotend1, Bed) + * RAMPS_14_EFF (Hotend, Fan0, Fan1) + * RAMPS_14_EEF (Hotend0, Hotend1, Fan) + * RAMPS_14_SF (Spindle, Controller Fan) + * + * RAMPS_13_EFB (Hotend, Fan, Bed) + * RAMPS_13_EEB (Hotend0, Hotend1, Bed) + * RAMPS_13_EFF (Hotend, Fan0, Fan1) + * RAMPS_13_EEF (Hotend0, Hotend1, Fan) + * RAMPS_13_SF (Spindle, Controller Fan) + * + * Other pins_MYBOARD.h files may override these defaults + * + * Differences between + * RAMPS_13 | RAMPS_14 + * 7 | 11 + */ + +#ifdef TARGET_LPC1768 + #error "Oops! Set MOTHERBOARD to an LPC1768-based board when building for LPC1768." +#elif defined(__STM32F1__) + #error "Oops! Set MOTHERBOARD to an STM32F1-based board when building for STM32F1." +#endif + +#if NOT_TARGET(IS_RAMPS_SMART, IS_RAMPS_DUO, IS_RAMPS4DUE, TARGET_LPC1768, __AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' (or other appropriate target) in 'Tools > Board.'" +#endif + +// Custom flags and defines for the build +//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__ + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RAMPS 1.4" +#endif + +// +// Servos +// +#ifndef SERVO0_PIN + #ifdef IS_RAMPS_13 + #define SERVO0_PIN 7 + #else + #define SERVO0_PIN 11 + #endif +#endif +#ifndef SERVO1_PIN + #define SERVO1_PIN 6 +#endif +#ifndef SERVO2_PIN + #define SERVO2_PIN 5 +#endif +#ifndef SERVO3_PIN + #define SERVO3_PIN 4 +#endif + +// +// Limit Switches +// +#ifndef X_STOP_PIN + #ifndef X_MIN_PIN + #define X_MIN_PIN 3 + #endif + #ifndef X_MAX_PIN + #define X_MAX_PIN 2 + #endif +#endif +#ifndef Y_STOP_PIN + #ifndef Y_MIN_PIN + #define Y_MIN_PIN 14 + #endif + #ifndef Y_MAX_PIN + #define Y_MAX_PIN 15 + #endif +#endif +#ifndef Z_STOP_PIN + #ifndef Z_MIN_PIN + #define Z_MIN_PIN 18 + #endif + #ifndef Z_MAX_PIN + #define Z_MAX_PIN 19 + #endif +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 53 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 49 +#endif + +#ifndef Z_STEP_PIN + #define Z_STEP_PIN 46 +#endif +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#ifndef Z_CS_PIN + #define Z_CS_PIN 40 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 42 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 44 +#endif + +// +// Temperature Sensors +// +#ifndef TEMP_0_PIN + #define TEMP_0_PIN 13 // Analog Input +#endif +#ifndef TEMP_1_PIN + #define TEMP_1_PIN 15 // Analog Input +#endif +#ifndef TEMP_BED_PIN + #define TEMP_BED_PIN 14 // Analog Input +#endif + +// +// SPI for Max6675 or Max31855 Thermocouple +// +#ifndef MAX6675_SS_PIN + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card (SDSS) or 49 (SD_DETECT_PIN) +#endif + +// +// Augmentation for auto-assigning RAMPS plugs +// +#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) + #if HAS_MULTI_HOTEND + #if TEMP_SENSOR_BED + #define IS_RAMPS_EEB + #else + #define IS_RAMPS_EEF + #endif + #elif TEMP_SENSOR_BED + #define IS_RAMPS_EFB + #else + #define IS_RAMPS_EFF + #endif +#endif + +// +// Heaters / Fans +// +#ifndef MOSFET_D_PIN + #define MOSFET_D_PIN -1 +#endif +#ifndef RAMPS_D8_PIN + #define RAMPS_D8_PIN 8 +#endif +#ifndef RAMPS_D9_PIN + #define RAMPS_D9_PIN 9 +#endif +#ifndef RAMPS_D10_PIN + #define RAMPS_D10_PIN 10 +#endif + +#define HEATER_0_PIN RAMPS_D10_PIN + +#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN RAMPS_D9_PIN +#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan + #define FAN1_PIN RAMPS_D8_PIN +#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") + #define HEATER_BED_PIN RAMPS_D8_PIN + #if HOTENDS == 1 + #define FAN1_PIN MOSFET_D_PIN + #else + #define HEATER_1_PIN MOSFET_D_PIN + #endif +#endif + +#ifndef FAN_PIN + #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan + #define FAN_PIN RAMPS_D9_PIN + #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan + #define FAN_PIN RAMPS_D8_PIN + #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define FAN_PIN 4 // IO pin. Buffer needed + #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") + #define FAN_PIN RAMPS_D9_PIN + #endif +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 5 // Analog Input on AUX2 +#endif + +// RAMPS 1.4 DIO 4 on the servos connector +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 4 +#endif + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM + #elif HAS_FREE_AUX2_PINS + #define CASE_LIGHT_PIN 44 // Hardware PWM + #endif +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) + #if !NUM_SERVOS // Use servo connector if possible + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 + #elif HAS_FREE_AUX2_PINS + #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 + #else + #error "No auto-assignable Spindle/Laser pins available." + #endif +#endif + +// +// TMC software SPI +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI 66 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO 44 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK 64 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + + #ifndef X_SERIAL_TX_PIN + #define X_SERIAL_TX_PIN 40 + #endif + #ifndef X_SERIAL_RX_PIN + #define X_SERIAL_RX_PIN 63 + #endif + #ifndef X2_SERIAL_TX_PIN + #define X2_SERIAL_TX_PIN -1 + #endif + #ifndef X2_SERIAL_RX_PIN + #define X2_SERIAL_RX_PIN -1 + #endif + + #ifndef Y_SERIAL_TX_PIN + #define Y_SERIAL_TX_PIN 59 + #endif + #ifndef Y_SERIAL_RX_PIN + #define Y_SERIAL_RX_PIN 64 + #endif + #ifndef Y2_SERIAL_TX_PIN + #define Y2_SERIAL_TX_PIN -1 + #endif + #ifndef Y2_SERIAL_RX_PIN + #define Y2_SERIAL_RX_PIN -1 + #endif + + #ifndef Z_SERIAL_TX_PIN + #define Z_SERIAL_TX_PIN 42 + #endif + #ifndef Z_SERIAL_RX_PIN + #define Z_SERIAL_RX_PIN 65 + #endif + #ifndef Z2_SERIAL_TX_PIN + #define Z2_SERIAL_TX_PIN -1 + #endif + #ifndef Z2_SERIAL_RX_PIN + #define Z2_SERIAL_RX_PIN -1 + #endif + + #ifndef E0_SERIAL_TX_PIN + #define E0_SERIAL_TX_PIN 44 + #endif + #ifndef E0_SERIAL_RX_PIN + #define E0_SERIAL_RX_PIN 66 + #endif + #ifndef E1_SERIAL_TX_PIN + #define E1_SERIAL_TX_PIN -1 + #endif + #ifndef E1_SERIAL_RX_PIN + #define E1_SERIAL_RX_PIN -1 + #endif + #ifndef E2_SERIAL_TX_PIN + #define E2_SERIAL_TX_PIN -1 + #endif + #ifndef E2_SERIAL_RX_PIN + #define E2_SERIAL_RX_PIN -1 + #endif + #ifndef E3_SERIAL_TX_PIN + #define E3_SERIAL_TX_PIN -1 + #endif + #ifndef E3_SERIAL_RX_PIN + #define E3_SERIAL_RX_PIN -1 + #endif + #ifndef E4_SERIAL_TX_PIN + #define E4_SERIAL_TX_PIN -1 + #endif + #ifndef E4_SERIAL_RX_PIN + #define E4_SERIAL_RX_PIN -1 + #endif + #ifndef E5_SERIAL_TX_PIN + #define E5_SERIAL_TX_PIN -1 + #endif + #ifndef E5_SERIAL_RX_PIN + #define E5_SERIAL_RX_PIN -1 + #endif + #ifndef E6_SERIAL_TX_PIN + #define E6_SERIAL_TX_PIN -1 + #endif + #ifndef E6_SERIAL_RX_PIN + #define E6_SERIAL_RX_PIN -1 + #endif + #ifndef E7_SERIAL_TX_PIN + #define E7_SERIAL_TX_PIN -1 + #endif + #ifndef E7_SERIAL_RX_PIN + #define E7_SERIAL_RX_PIN -1 + #endif +#endif + +// +// Průša i3 MK2 Multiplexer Support +// +#ifndef E_MUX0_PIN + #define E_MUX0_PIN 40 // Z_CS_PIN +#endif +#ifndef E_MUX1_PIN + #define E_MUX1_PIN 42 // E0_CS_PIN +#endif +#ifndef E_MUX2_PIN + #define E_MUX2_PIN 44 // E1_CS_PIN +#endif + +////////////////////////// +// LCDs and Controllers // +////////////////////////// + +#if HAS_WIRED_LCD + + // + // LCD Display output pins + // + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock + + #elif BOTH(IS_NEWPANEL, PANEL_ONE) + + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 65 + #define LCD_PINS_D5 66 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 64 + + #elif ENABLED(TFTGLCD_PANEL_SPI) + + #define TFTGLCD_CS 33 + + #else + + #if ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 25 + + #if !IS_NEWPANEL + #define BEEPER_PIN 37 + #endif + + #elif ENABLED(ZONESTAR_LCD) + + #error "CAUTION! ZONESTAR_LCD on RAMPS requires wiring modifications. It plugs into AUX2 but GND and 5V need to be swapped. Comment out this line to continue." + #define LCD_PINS_RS 64 + #define LCD_PINS_ENABLE 44 + #define LCD_PINS_D4 63 + #define LCD_PINS_D5 40 + #define LCD_PINS_D6 42 + #define LCD_PINS_D7 65 + + #else + + #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) + #define LCD_PINS_DC 25 // Set as output on init + #define LCD_PINS_RS 27 // Pull low for 1s to init + // DOGM SPI LCD Support + #define DOGLCD_A0 LCD_PINS_DC + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 17 + #define DOGLCD_SCK 23 + #else + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #endif + + #define LCD_PINS_D7 29 + + #if !IS_NEWPANEL + #define BEEPER_PIN 33 + #endif + + #endif + + #if !IS_NEWPANEL + // Buttons attached to a shift register + // Not wired yet + //#define SHIFT_CLK_PIN 38 + //#define SHIFT_LD_PIN 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_EN_PIN 17 + #endif + + #endif + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + // + // LCD Display input pins + // + #if IS_NEWPANEL + + #if IS_RRD_SC + + #define BEEPER_PIN 37 + + #if ENABLED(CR10_STOCKDISPLAY) + #define BTN_EN1 17 + #define BTN_EN2 23 + #else + #define BTN_EN1 31 + #define BTN_EN2 33 + #endif + + #define BTN_ENC 35 + #ifndef SD_DETECT_PIN + #define SD_DETECT_PIN 49 + #endif + #ifndef KILL_PIN + #define KILL_PIN 41 + #endif + + #if ENABLED(BQ_LCD_SMART_CONTROLLER) + #define LCD_BACKLIGHT_PIN 39 + #endif + + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS SDSS + #define KILL_PIN 41 + + #elif ENABLED(LCD_I2C_VIKI) + + #define BTN_EN1 40 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 42 + #define BTN_ENC -1 + + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 + + #elif ANY(VIKI2, miniVIKI) + + #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define LCD_SCREEN_ROT_180 + + #define BEEPER_PIN 33 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 + + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 + + #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board + #define KILL_PIN 31 + + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 + + #define BEEPER_PIN 23 + #define LCD_BACKLIGHT_PIN 33 + + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 + + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + + #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864) + + #define BEEPER_PIN 37 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + + #ifndef KILL_PIN + #define KILL_PIN 41 + #endif + + #if ENABLED(MKS_MINI_12864) + + #define DOGLCD_A0 27 + #define DOGLCD_CS 25 + + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + // not connected to a pin + #define LCD_BACKLIGHT_PIN -1 // 65 (MKS mini12864 can't adjust backlight by software!) + + #define BTN_EN1 31 + #define BTN_EN2 33 + + #elif ENABLED(FYSETC_MINI_12864) + + // From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 + + #define DOGLCD_A0 16 + #define DOGLCD_CS 17 + + #define BTN_EN1 33 + #define BTN_EN2 31 + + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 25 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN 27 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN 29 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN 25 + #endif + + #endif + + #elif ENABLED(MINIPANEL) + + #define BEEPER_PIN 42 + // not connected to a pin + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 + + #define SD_DETECT_PIN 49 + #define KILL_PIN 64 + + #elif ENABLED(ZONESTAR_LCD) + + #define ADC_KEYPAD_PIN 12 + + #elif ENABLED(AZSMZ_12864) + + // Pins only defined for RAMPS_SMART currently + #error "No pins defined for RAMPS with AZSMZ_12864." + + #elif IS_TFTGLCD_PANEL + + #define SD_DETECT_PIN 49 + + #else + + // Beeper on AUX-4 + #define BEEPER_PIN 33 + + // Buttons are directly attached to AUX-2 + #if ENABLED(PANEL_ONE) + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 + #else + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 + #endif + + #if ENABLED(G3D_PANEL) + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + #endif + + #endif + #endif // IS_NEWPANEL + +#endif // HAS_WIRED_LCD + +#if IS_RRW_KEYPAD && !HAS_ADC_BUTTONS + #define SHIFT_OUT_PIN 40 + #define SHIFT_CLK_PIN 44 + #define SHIFT_LD_PIN 42 + #ifndef BTN_EN1 + #define BTN_EN1 64 + #endif + #ifndef BTN_EN2 + #define BTN_EN2 59 + #endif + #ifndef BTN_ENC + #define BTN_ENC 63 + #endif +#endif + +#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) + + #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. Comment out this line to continue." + + /** FYSETC TFT TFT81050 display pinout + * + * Board Display + * _____ _____ + * (SCK) D52 | 1 2 | D50 (MISO) MISO | 1 2 | SCK + * (SD_CS) D53 | 3 4 | D33 (BNT_EN2) (BNT_EN2) MOD_RESET | 3 4 | SD_CS + * (MOSI) D51 | 5 6 D31 (BNT_EN1) (BNT_EN1) LCD_CS | 5 6 MOSI + * RESET | 7 8 | D49 (SD_DET) SD_DET | 7 8 | RESET + * NC | 9 10| GND GND | 9 10| 5V + * ----- ----- + * EXP2 EXP1 + * + * Needs custom cable: + * + * Board Adapter Display + * _________ + * EXP2-1 ----------- EXP1-10 + * EXP2-2 ----------- EXP1-9 + * EXP2-4 ----------- EXP1-8 + * EXP2-4 ----------- EXP1-7 + * EXP2-3 ----------- EXP1-6 + * EXP2-6 ----------- EXP1-5 + * EXP2-7 ----------- EXP1-4 + * EXP2-8 ----------- EXP1-3 + * EXP2-1 ----------- EXP1-2 + * EXP1-10 ----------- EXP1-1 + * + * NOTE: The MISO pin should not get a 5V signal. + * To fix, insert a 1N4148 diode in the MISO line. + */ + + #define BEEPER_PIN 37 + + #define SD_DETECT_PIN 49 + + #define CLCD_MOD_RESET 31 + #define CLCD_SPI_CS 33 +#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_13.h b/Marlin/src/pins/ramps/pins_RAMPS_13.h new file mode 100644 index 0000000..6e7c8cb --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RAMPS_13.h @@ -0,0 +1,42 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS v1.3 pin assignments + * + * Applies to the following boards: + * + * RAMPS_13_EFB (Extruder, Fan, Bed) + * RAMPS_13_EEB (Extruder, Extruder, Bed) + * RAMPS_13_EFF (Extruder, Fan, Fan) + * RAMPS_13_EEF (Extruder, Extruder, Fan) + * RAMPS_13_SF (Spindle, Controller Fan) + */ + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RAMPS 1.3" +#endif + +#define IS_RAMPS_13 + +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h new file mode 100644 index 0000000..1dc898e --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h @@ -0,0 +1,68 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Creality3D RAMPS supports only 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Creality3D RAMPS" + +// +// Heaters / Fans +// + +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +#define FIL_RUNOUT_PIN 2 +#if NUM_RUNOUT_SENSORS > 1 + #define FIL_RUNOUT2_PIN 15 // Creality CR-X can use dual runout sensors +#endif + +#ifndef SD_DETECT_PIN + #define SD_DETECT_PIN 49 // Always define onboard SD detect +#endif + +#ifndef PS_ON_PIN + #define PS_ON_PIN 40 // Used by CR2020 Industrial series +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) + #define CASE_LIGHT_PIN 65 +#endif + +#include "pins_RAMPS.h" + +#ifndef BEEPER_PIN + #define BEEPER_PIN 37 // Always define beeper pin so Play Tone works with ExtUI +#endif + +#define EXP1_PIN 65 // A11 - Used by CR2020 Industrial series for case +#define EXP2_PIN 66 // A12 +#define EXP3_PIN 11 // SERVO0_PIN +#define EXP4_PIN 12 // PS_ON_PIN + +#define SUICIDE_PIN 12 // Used by CR2020 Industrial series +#ifndef SUICIDE_PIN_INVERTING + #define SUICIDE_PIN_INVERTING true +#endif diff --git a/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h b/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h new file mode 100644 index 0000000..d996424 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h @@ -0,0 +1,41 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if HOTENDS > 1 || E_STEPPERS > 1 + #error "Ender-4 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Ender-4" + +#include "pins_RAMPS.h" + +// The board only has one PWM fan connector. The others are 12V always-on. +// The default config uses this pin to control the brightness of the LED +// band (case light). Thus the hotend and controller fans are always-on. + +#if ENABLED(CASE_LIGHT_ENABLE) + #undef FAN_PIN + #ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN RAMPS_D9_PIN + #endif +#endif diff --git a/Marlin/src/pins/ramps/pins_RAMPS_OLD.h b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h new file mode 100644 index 0000000..6d2dad2 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h @@ -0,0 +1,119 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS v1.0, v1.1, v1.2 pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "RAMPS <1.2" + +// Uncomment the following line for RAMPS v1.0 +//#define RAMPS_V_1_0 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 16 +#define Y_MAX_PIN 17 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 19 +#endif + +// +// Steppers +// +#define X_STEP_PIN 26 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 38 +#define Y_DIR_PIN 40 +#define Y_ENABLE_PIN 36 + +#define Z_STEP_PIN 44 +#define Z_DIR_PIN 46 +#define Z_ENABLE_PIN 42 + +#define E0_STEP_PIN 32 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 2 // Analog Input +#define TEMP_BED_PIN 1 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card +#else + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) +#endif + +// +// Heaters / Fans +// +#if ENABLED(RAMPS_V_1_0) + #define HEATER_0_PIN 12 + #define HEATER_BED_PIN -1 + #ifndef FAN_PIN + #define FAN_PIN 11 + #endif +#else // RAMPS_V_1_1 or RAMPS_V_1_2 + #define HEATER_0_PIN 10 + #define HEATER_BED_PIN 8 + #ifndef FAN_PIN + #define FAN_PIN 9 + #endif +#endif + +// +// Misc. Functions +// +#define SDPOWER_PIN 48 +#define SDSS 53 +#define LED_PIN 13 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 45 // Hardware PWM +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENA_PIN 41 // Pullup or pulldown! +#define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM +#define SPINDLE_DIR_PIN 43 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h new file mode 100644 index 0000000..23b1dfa --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h @@ -0,0 +1,85 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS v1.4Plus, also known as 3DYMY version, pin assignments + * The differences to the RAMPS v1.4 are: + * - Swap heater E0 with E1 + * - Swap pins 8 and 10. Bed/Fan/Hotend as labeled on the board are on pins 8/9/10. + * - Change pins 16->42, 17->44 and 29->53 used for display. + * + * Applies to the following boards: + * + * RAMPS_PLUS_EFB (Extruder, Fan, Bed) + * RAMPS_PLUS_EEB (Extruder, Extruder, Bed) + * RAMPS_PLUS_EFF (Extruder, Fan, Fan) + * RAMPS_PLUS_EEF (Extruder, Extruder, Fan) + * RAMPS_PLUS_SF (Spindle, Controller Fan) + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "RAMPS 1.4 Plus" + +#define RAMPS_D8_PIN 10 +#define RAMPS_D10_PIN 8 + +#include "pins_RAMPS.h" + +// +// Steppers - Swap E0 / E1 on 3DYMY +// +#undef E0_STEP_PIN +#undef E0_DIR_PIN +#undef E0_ENABLE_PIN + +#undef E1_STEP_PIN +#undef E1_DIR_PIN +#undef E1_ENABLE_PIN + +#define E0_STEP_PIN 36 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 24 + +#undef X_CS_PIN +#undef Y_CS_PIN +#undef Z_CS_PIN +#undef E0_CS_PIN +#undef E1_CS_PIN + +#if IS_ULTRA_LCD && NONE(REPRAPWORLD_GRAPHICAL_LCD, CR10_STOCKDISPLAY) && !BOTH(IS_NEWPANEL, PANEL_ONE) + #if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306) + #undef LCD_PINS_RS + #define LCD_PINS_RS 42 // 3DYMY boards pin 16 -> 42 + #undef LCD_PINS_ENABLE + #define LCD_PINS_ENABLE 44 // 3DYMY boards pin 17 -> 44 + #endif + #undef LCD_PINS_D7 + #define LCD_PINS_D7 53 // 3DYMY boards pin 29 -> 53 +#endif diff --git a/Marlin/src/pins/ramps/pins_RAMPS_S_12.h b/Marlin/src/pins/ramps/pins_RAMPS_S_12.h new file mode 100644 index 0000000..1bcf310 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RAMPS_S_12.h @@ -0,0 +1,280 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS-S v1.2 by Sakul.cz pin assignments + * Written by Michal Rábek <rabek33@gmail.com> + * + * Applies to the following boards: + * + * BOARD_RAMPS_S_12_EEFB Ramps S 1.2 (Hotend0, Hotend1, Fan, Bed) + * BOARD_RAMPS_S_12_EEEB Ramps S 1.2 (Hotend0, Hotend1, Hotend2, Bed) + * BOARD_RAMPS_S_12_EFFB Ramps S 1.2 (Hotend, Fan0, Fan1, Bed) + * + * Other pins_MYBOARD.h files may override these defaults + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +// Custom flags and defines for the build +//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__ + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RAMPS S 1.2" +#endif + +// +// Servos +// +#ifndef SERVO0_PIN + #define SERVO0_PIN 10 +#endif +#ifndef SERVO1_PIN + #define SERVO1_PIN 11 +#endif +#ifndef SERVO2_PIN + #define SERVO2_PIN 12 +#endif +#ifndef SERVO3_PIN + #define SERVO3_PIN 44 +#endif + +// +// Limit Switches +// +#ifndef X_STOP_PIN + #ifndef X_MIN_PIN + #define X_MIN_PIN 37 + #endif + #ifndef X_MAX_PIN + #define X_MAX_PIN 36 + #endif +#endif +#ifndef Y_STOP_PIN + #ifndef Y_MIN_PIN + #define Y_MIN_PIN 35 + #endif + #ifndef Y_MAX_PIN + #define Y_MAX_PIN 34 + #endif +#endif +#ifndef Z_STOP_PIN + #ifndef Z_MIN_PIN + #define Z_MIN_PIN 33 + #endif + #ifndef Z_MAX_PIN + #define Z_MAX_PIN 32 + #endif +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 5 +#endif + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 44 // RAMPS_S S3 on the servos connector +#endif + +// +// Steppers +// +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 48 + +#define Y_STEP_PIN 54 +#define Y_DIR_PIN 47 +#define Y_ENABLE_PIN 55 + +#ifndef Z_STEP_PIN + #define Z_STEP_PIN 57 +#endif +#define Z_DIR_PIN 56 +#define Z_ENABLE_PIN 62 + +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 22 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 25 +#define E1_ENABLE_PIN 27 + +#define E2_STEP_PIN 29 +#define E2_DIR_PIN 28 +#define E2_ENABLE_PIN 39 + +// +// Temperature Sensors +// +#ifndef TEMP_0_PIN + #define TEMP_0_PIN 15 // Analog Input +#endif +#ifndef TEMP_1_PIN + #define TEMP_1_PIN 14 // Analog Input +#endif +#ifndef TEMP_2_PIN + #define TEMP_2_PIN 13 // Analog Input +#endif +#ifndef TEMP_3_PIN + #define TEMP_3_PIN 12 // Analog Input +#endif +#ifndef TEMP_BED_PIN + #define TEMP_BED_PIN 11 // Analog Input +#endif + +// +// Heaters / Fans +// +#ifndef MOSFET_D_PIN + #define MOSFET_D_PIN -1 +#endif +#ifndef RAMPS_S_HE_0 + #define RAMPS_S_HE_0 2 +#endif +#ifndef RAMPS_S_HE_1 + #define RAMPS_S_HE_1 3 +#endif +#ifndef RAMPS_S_HE_2 + #define RAMPS_S_HE_2 6 +#endif + +#define HEATER_BED_PIN 9 + +#define HEATER_0_PIN RAMPS_S_HE_0 + +#if MB(RAMPS_S_12_EEFB) // Hotend0, Hotend1, Fan, Bed + #define HEATER_1_PIN RAMPS_S_HE_1 + #define FAN_PIN RAMPS_S_HE_2 +#elif MB(RAMPS_S_12_EEEB) // Hotend0, Hotend1, Hotend2, Bed + #define HEATER_1_PIN RAMPS_S_HE_1 + #define HEATER_2_PIN RAMPS_S_HE_2 +#elif MB(RAMPS_S_12_EFFB) // Hotend, Fan0, Fan1, Bed + #define FAN_PIN RAMPS_S_HE_1 + #define FAN1_PIN RAMPS_S_HE_2 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 + +#ifndef KILL_PIN + #define KILL_PIN 46 +#endif + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 60 // Analog Input on EXTEND +#endif + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 // RAMPS_S S2 on the servos connector +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 12 // Hardware PWM (RAMPS_S S1 on the servos connector) + #elif HAS_FREE_AUX2_PINS + #define CASE_LIGHT_PIN 44 // Hardware PWM + #endif +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 +#endif + +// +// TMC software SPI +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI 51 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO 50 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK 53 + #endif +#endif + +// +// Průša i3 MK2 Multiplexer Support +// +#ifndef E_MUX0_PIN + #define E_MUX0_PIN 29 // E2_STEP_PIN +#endif +#ifndef E_MUX1_PIN + #define E_MUX1_PIN 28 // E2_DIR_PIN +#endif +#ifndef E_MUX2_PIN + #define E_MUX2_PIN 39 // E2_ENABLE_PIN +#endif + +////////////////////////// +// LCDs and Controllers // +////////////////////////// + +// +// LCD Display output pins +// +#if HAS_WIRED_LCD + #define BEEPER_PIN 45 + #define LCD_PINS_RS 19 + #define LCD_PINS_ENABLE 49 + #define LCD_PINS_D4 18 + #define LCD_PINS_D5 30 + #define LCD_PINS_D6 41 + #define LCD_PINS_D7 31 + #ifndef SD_DETECT_PIN + #define SD_DETECT_PIN 38 + #endif + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif + +// +// LCD Display input pins +// +#if IS_NEWPANEL + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 43 +#endif diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h new file mode 100644 index 0000000..345c51d --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h @@ -0,0 +1,135 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * RIGIDBOARD Arduino Mega with RAMPS v1.4 pin assignments + */ + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RigidBoard" +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 19 // Z-MAX pin J14 End Stops +#endif + +// +// MOSFET changes +// +#define RAMPS_D9_PIN 8 // FAN (by default) +#define RAMPS_D10_PIN 9 // EXTRUDER 1 +#define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN + +#include "pins_RAMPS.h" + +// +// Steppers +// +// RigidBot swaps E0 / E1 plugs vs RAMPS 1.3 +#undef E0_STEP_PIN +#undef E0_DIR_PIN +#undef E0_ENABLE_PIN +#define E0_STEP_PIN 36 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 + +#undef E1_STEP_PIN +#undef E1_DIR_PIN +#undef E1_ENABLE_PIN +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 24 + +#define STEPPER_RESET_PIN 41 // Stepper drivers have a reset on RigidBot + +// +// Temperature Sensors +// +#undef TEMP_0_PIN +#undef TEMP_1_PIN +#undef TEMP_BED_PIN +#define TEMP_0_PIN 14 // Analog Input +#define TEMP_1_PIN 13 // Analog Input +#define TEMP_BED_PIN 15 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#undef MAX6675_SS_PIN +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card +#else + #define MAX6675_SS_PIN 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present +#endif + +// +// Heaters / Fans +// +#undef HEATER_BED_PIN +#define HEATER_BED_PIN 10 + +#ifndef FAN_PIN + #define FAN_PIN 8 // Same as RAMPS_13_EEF +#endif + +// +// Misc. Functions +// +#undef PS_ON_PIN + +// +// LCD / Controller +// +// LCD Panel options for the RigidBoard +#if ENABLED(RIGIDBOT_PANEL) + + #undef BEEPER_PIN + #define BEEPER_PIN -1 + + // Direction buttons + #define BTN_UP 37 + #define BTN_DWN 35 + #define BTN_LFT 33 + #define BTN_RT 32 + + // 'R' button + #undef BTN_ENC + #define BTN_ENC 31 + + // Disable encoder + #undef BTN_EN1 + #undef BTN_EN2 + + #undef SD_DETECT_PIN + #define SD_DETECT_PIN 22 + +#elif IS_RRD_SC + + #undef SD_DETECT_PIN + #define SD_DETECT_PIN 22 + + #undef KILL_PIN + #define KILL_PIN 32 + +#endif diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h new file mode 100644 index 0000000..1428de3 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h @@ -0,0 +1,52 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * RIGIDBOARD V2 Arduino Mega with RAMPS v1.4 pin assignments + */ + +#define BOARD_INFO_NAME "RigidBoard V2" + +#include "pins_RIGIDBOARD.h" + +// +// Steppers +// + +// I2C based DAC like on the Printrboard REVF +#define HAS_MOTOR_CURRENT_DAC + +// Channels available for DAC, For Rigidboard there are 4 +#define DAC_STEPPER_ORDER { 0, 1, 2, 3 } + +#define DAC_STEPPER_SENSE 0.05 // sense resistors on rigidboard stepper chips are .05 value +#define DAC_STEPPER_ADDRESS 0 +#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096 +#define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V +#define DAC_STEPPER_GAIN 1 // value of 1 here sets gain of 2 +#define DAC_DISABLE_PIN 42 // set low to enable DAC +#define DAC_OR_ADDRESS 0x01 + +#ifndef DAC_MOTOR_CURRENT_DEFAULT + #define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +#endif diff --git a/Marlin/src/pins/ramps/pins_RL200.h b/Marlin/src/pins/ramps/pins_RL200.h new file mode 100644 index 0000000..047ad16 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RL200.h @@ -0,0 +1,52 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Rapide Lite 200 v1 (RUMBA clone) pin assignments. Has slightly different assignment for + * extruder motors due to dual Z motors. Pinout therefore based on pins_RUMBA.h. + */ + +#define BOARD_INFO_NAME "RL200" +#define DEFAULT_MACHINE_NAME "Rapide Lite 200" + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "RL200v1 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#elif NUM_Z_STEPPER_DRIVERS != 2 + #error "RL200 uses dual Z stepper motors. Set NUM_Z_STEPPER_DRIVERS to 2 or comment out this line to continue." +#elif !(AXIS_DRIVER_TYPE_X(DRV8825) && AXIS_DRIVER_TYPE_Y(DRV8825) && AXIS_DRIVER_TYPE_Z(DRV8825) && AXIS_DRIVER_TYPE_Z2(DRV8825) && AXIS_DRIVER_TYPE_E0(DRV8825)) + #error "You must set ([XYZ]|Z2|E0)_DRIVER_TYPE to DRV8825 in Configuration.h for RL200." +#endif + +#define E0_STEP_PIN 26 // (RUMBA E1 pins) +#define E0_DIR_PIN 25 +#define E0_ENABLE_PIN 27 + +#define E1_STEP_PIN 29 // (RUMBA E2 pins) +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 39 + +#define Z2_STEP_PIN 23 // (RUMBA E0 pins) +#define Z2_DIR_PIN 22 +#define Z2_ENABLE_PIN 24 + +#include "pins_RUMBA.h" diff --git a/Marlin/src/pins/ramps/pins_RUMBA.h b/Marlin/src/pins/ramps/pins_RUMBA.h new file mode 100644 index 0000000..4af49d9 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RUMBA.h @@ -0,0 +1,234 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * RUMBA pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 3 || E_STEPPERS > 3 + #error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Rumba" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME +#endif + +// +// Servos +// +#define SERVO0_PIN 5 + +// +// Limit Switches +// +#define X_MIN_PIN 37 +#define X_MAX_PIN 36 +#define Y_MIN_PIN 35 +#define Y_MAX_PIN 34 +#define Z_MIN_PIN 33 +#define Z_MAX_PIN 32 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 48 + +#define Y_STEP_PIN 54 +#define Y_DIR_PIN 47 +#define Y_ENABLE_PIN 55 + +#define Z_STEP_PIN 57 +#define Z_DIR_PIN 56 +#define Z_ENABLE_PIN 62 + +#ifndef E0_STEP_PIN + #define E0_STEP_PIN 23 + #define E0_DIR_PIN 22 + #define E0_ENABLE_PIN 24 +#endif + +#ifndef E1_STEP_PIN + #define E1_STEP_PIN 26 + #define E1_DIR_PIN 25 + #define E1_ENABLE_PIN 27 +#endif + +#if E1_STEP_PIN != 29 + #define E2_STEP_PIN 29 + #define E2_DIR_PIN 28 + #define E2_ENABLE_PIN 39 +#endif + +// +// Temperature Sensors +// +#ifndef TEMP_0_PIN + #if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used) + #else + #define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used) + #endif +#endif + +#ifndef TEMP_1_PIN + #if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used) + #else + #define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used) + #endif +#endif + +#if TEMP_SENSOR_2 == -1 + #define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple) +#else + #define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used) +#endif + +// Optional for extruder 4 or chamber: +//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) + +#ifndef TEMP_CHAMBER_PIN + //#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) +#endif + +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple) +#else + #define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used) +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_2_PIN 6 +#define HEATER_3_PIN 8 +#define HEATER_BED_PIN 9 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif +#ifndef FAN1_PIN + #define FAN1_PIN 8 +#endif + +// +// Misc. Functions +// +#define LED_PIN 13 +#define PS_ON_PIN 45 +#define KILL_PIN 46 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 45 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#ifndef SPINDLE_LASER_PWM_PIN + #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM. Pin 4 interrupts OC0* and OC1* always in use? +#endif +#ifndef SPINDLE_LASER_ENA_PIN + #define SPINDLE_LASER_ENA_PIN 14 // Pullup! +#endif +#ifndef SPINDLE_DIR_PIN + #define SPINDLE_DIR_PIN 15 +#endif + +// +// LCD / Controller +// +#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) + #define LCD_PINS_DC 38 // Set as output on init + #define LCD_PINS_RS 41 // Pull low for 1s to init + // DOGM SPI LCD Support + #define DOGLCD_CS 19 + #define DOGLCD_MOSI 42 + #define DOGLCD_SCK 18 + #define DOGLCD_A0 LCD_PINS_DC +#elif ENABLED(FYSETC_MINI_12864) + #define DOGLCD_CS 42 + #define DOGLCD_A0 19 + #define DOGLCD_MOSI 51 + #define DOGLCD_SCK 52 + + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 + + #define LCD_RESET_PIN 18 // Must be high or open for LCD to operate normally. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 41 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN 38 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN 40 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN 25 + #endif + +#else + #define LCD_PINS_RS 19 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 18 + #define LCD_PINS_D5 38 + #define LCD_PINS_D6 41 +#endif + +#define LCD_PINS_D7 40 + +// +// Beeper, SD Card, Encoder +// +#define BEEPER_PIN 44 + +#if ENABLED(SDSUPPORT) + #define SDSS 53 + #define SD_DETECT_PIN 49 +#endif + +#if IS_NEWPANEL + #define BTN_EN1 11 + #define BTN_EN2 12 + #define BTN_ENC 43 +#endif diff --git a/Marlin/src/pins/ramps/pins_RUMBA_RAISE3D.h b/Marlin/src/pins/ramps/pins_RUMBA_RAISE3D.h new file mode 100644 index 0000000..3994261 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_RUMBA_RAISE3D.h @@ -0,0 +1,31 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#define BOARD_INFO_NAME "Raise3D Rumba" +#define DEFAULT_MACHINE_NAME "Raise3D N Series" + +// Raise3D uses thermocouples on the standard input pins +#define TEMP_0_PIN 15 // Analog Input +#define TEMP_1_PIN 14 // Analog Input + +#include "pins_RUMBA.h" diff --git a/Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h b/Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h new file mode 100644 index 0000000..e15fc94 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h @@ -0,0 +1,42 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Sainsmart 2-in-1 pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Sainsmart 2-in-1 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Sainsmart" + +// +// Heaters / Fans +// +#define RAMPS_D10_PIN 9 // E +#define RAMPS_D9_PIN 7 // F PART FAN in front of board next to Extruder heat + // RAMPS_D8_PIN 8 // B +#define MOSFET_D_PIN 10 // F / E + +#include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_TANGO.h b/Marlin/src/pins/ramps/pins_TANGO.h new file mode 100644 index 0000000..451d2f8 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_TANGO.h @@ -0,0 +1,53 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * BIQU Tango pin assignments + */ + +#define BOARD_INFO_NAME "Tango" + +#define FAN_PIN 8 +#define FAN1_PIN -1 + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN 7 +#endif + +#ifndef TEMP_0_PIN + #if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 10 // Analog Input (connector *K1* on Tango thermocouple ADD ON is used) + #else + #define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used) + #endif +#endif + +#ifndef TEMP_1_PIN + #if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 9 // Analog Input (connector *K2* on Tango thermocouple ADD ON is used) + #else + #define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used) + #endif +#endif + +#include "pins_RUMBA.h" diff --git a/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h new file mode 100644 index 0000000..84e7e31 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h @@ -0,0 +1,185 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Tenlog pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "Tenlog supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Tenlog D3 Hero" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +// +// Servos +// +#define SERVO0_PIN 11 +#define SERVO1_PIN 6 +#define SERVO2_PIN -1 // Original pin 5 used for hotend fans +#define SERVO3_PIN 4 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 14 +//#define Y_MAX_PIN 15 // Connected to "DJ" plug on extruder heads +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 15 // Ramps is normally 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +//#ifndef X_CS_PIN + //#define X_CS_PIN 53 +//#endif + +#define X2_STEP_PIN 36 +#define X2_DIR_PIN 34 +#define X2_ENABLE_PIN 30 +//#ifndef X2_CS_PIN + //#define X2_CS_PIN 53 +//#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +//#ifndef Y_CS_PIN + //#define Y_CS_PIN 49 +//#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +//#ifndef Z_CS_PIN + //#define Z_CS_PIN 40 +//#endif + +#define Z2_STEP_PIN 65 +#define Z2_DIR_PIN 66 +#define Z2_ENABLE_PIN 64 +//#ifndef Z2_CS_PIN + //#define Z2_CS_PIN 40 +//#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +//#ifndef E0_CS_PIN + //define E0_CS_PIN 42 +//#endif + +#define E1_STEP_PIN 57 +#define E1_DIR_PIN 58 +#define E1_ENABLE_PIN 59 +//#ifndef E1_CS_PIN + //define E1_CS_PIN 44 +//#endif + +//#define E2_STEP_PIN 42 +//#define E2_DIR_PIN 43 +//#define E2_ENABLE_PIN 44 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN -1 // Don't use 53 if using Display/SD card +#else + #define MAX6675_SS_PIN -1 // Don't use 49 (SD_DETECT_PIN) +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 11 +#define HEATER_BED_PIN 8 + +#define FAN_PIN 9 +#define FAN1_PIN 5 // Normall this would be a servo pin + +// XXX Runout support unknown? +//#define NUM_RUNOUT_SENSORS 0 +//#define FIL_RUNOUT_PIN 22 +//#define FIL_RUNOUT2_PIN 21 + +// +// Misc. Functions +// +//#define CASE_LIGHT_PIN 5 +#define SDSS 53 +//#ifndef LED_PIN + //#define LED_PIN 13 +//#endif + +//#define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM +//#define SPINDLE_LASER_ENA_PIN 4 // Pullup! + +// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector +//#define FILWIDTH_PIN 5 // Analog Input + +// +// LCD / Controller +// + +//#if IS_RRD_SC + +#define LCD_PINS_RS -1 +#define LCD_PINS_ENABLE -1 +#define LCD_PINS_D4 -1 +#define LCD_PINS_D5 -1 +#define LCD_PINS_D6 -1 +#define LCD_PINS_D7 -1 +//#define BTN_EN1 31 +//#define BTN_EN2 33 +//#define BTN_ENC 35 +#define SD_DETECT_PIN 49 +//#ifndef KILL_PIN + //#define KILL_PIN 41 +//#endif +//#ifndef BEEPER_PIN +#define BEEPER_PIN -1 +//#endif + +//#endif // IS_RRD_SC diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_13.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_13.h new file mode 100644 index 0000000..9508be0 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_13.h @@ -0,0 +1,43 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS v1.3 for Anycubic + */ + +#define BOARD_INFO_NAME "Anycubic RAMPS 1.3" + +#define IS_RAMPS_EFB +#define RAMPS_D9_PIN 44 +#define FAN2_PIN 9 + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN 9 +#endif + +#include "pins_RAMPS_13.h" + +#undef E1_STEP_PIN +#undef E1_DIR_PIN +#undef E1_ENABLE_PIN +#undef E1_CS_PIN diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h new file mode 100644 index 0000000..54d91ce --- /dev/null +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h @@ -0,0 +1,157 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega with RAMPS v1.4 for Anycubic + */ + +#define BOARD_INFO_NAME "Anycubic RAMPS 1.4" + +// Board labeled pins: + +#define TG_HEATER_BED_PIN 8 +#define TG_HEATER_0_PIN 10 +#define TG_HEATER_1_PIN 45 // Anycubic Kossel: Unused + +#define TG_FAN0_PIN 9 // Anycubic Kossel: Usually the part cooling fan +#define TG_FAN1_PIN 7 // Anycubic Kossel: Unused +#define TG_FAN2_PIN 44 // Anycubic Kossel: Hotend fan + +// +// Servos +// +#if MB(TRIGORILLA_14_11) + #define SERVO0_PIN 5 + #define SERVO1_PIN 4 + #define SERVO2_PIN 11 + #define SERVO3_PIN 6 +#endif + +// Remap MOSFET pins to common usages: + +#define RAMPS_D10_PIN TG_HEATER_0_PIN // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h + +#if HAS_MULTI_HOTEND // EEF and EEB + #define RAMPS_D9_PIN TG_HEATER_1_PIN + #if !TEMP_SENSOR_BED + // EEF + #define RAMPS_D8_PIN TG_FAN0_PIN + #else + // EEB + #define RAMPS_D8_PIN TG_HEATER_BED_PIN + #define FAN_PIN TG_FAN0_PIN // Override pin 4 in pins_RAMPS.h + #endif +#elif TEMP_SENSOR_BED + // EFB (Anycubic Kossel default) + #define RAMPS_D9_PIN TG_FAN0_PIN + #if ENABLED(ANYCUBIC_LCD_CHIRON) + #define RAMPS_D8_PIN TG_HEATER_1_PIN // Heated bed is connected to HEATER1 output + #else + #define RAMPS_D8_PIN TG_HEATER_BED_PIN + #endif +#else + // EFF + #define RAMPS_D9_PIN TG_FAN1_PIN + #define RAMPS_D8_PIN TG_FAN0_PIN +#endif + +#if HAS_MULTI_HOTEND || TEMP_SENSOR_BED // EEF, EEB, EFB + #define FAN1_PIN TG_FAN1_PIN +#endif +#define FAN2_PIN TG_FAN2_PIN + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN TG_FAN2_PIN // Used in Anycubic Kossel example config +#endif + +#if ENABLED(ANYCUBIC_LCD_I3MEGA) + #define CONTROLLER_FAN_PIN TG_FAN1_PIN +#endif + +// +// AnyCubic standard pin mappings +// +// On most printers, endstops are NOT all wired to the appropriate pins on the Trigorilla board. +// For instance, on a Chiron, Y axis goes to an aux connector. +// There are also other things that have been wired in creative ways. +// To enable PIN definitions for a specific printer model, #define the appropriate symbol after +// MOTHERBOARD in Configuration.h + +// +// Limit Switches +// +//#define ANYCUBIC_4_MAX_PRO_ENDSTOPS + +#if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS) + #define X_MAX_PIN 43 + #define Y_STOP_PIN 19 +#elif EITHER(ANYCUBIC_LCD_CHIRON, ANYCUBIC_LCD_I3MEGA) + #define Y_STOP_PIN 42 + #define Z2_MIN_PIN 43 + #ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 2 + #endif + #ifndef FIL_RUNOUT_PIN + #if ENABLED(ANYCUBIC_LCD_CHIRON) + #define FIL_RUNOUT_PIN 33 + #else + #define FIL_RUNOUT_PIN 19 + #endif + #endif + #define BEEPER_PIN 31 + #define SD_DETECT_PIN 49 +#endif + +#include "pins_RAMPS.h" + +// +// AnyCubic made the following changes to 1.1.0-RC8 +// If these are appropriate for your LCD let us know. +// +#if 0 && HAS_WIRED_LCD + + // LCD Display output pins + #if BOTH(IS_NEWPANEL, PANEL_ONE) + #undef LCD_PINS_D6 + #define LCD_PINS_D6 57 + #endif + + // LCD Display input pins + #if IS_NEWPANEL + #if ANY(VIKI2, miniVIKI) + #undef DOGLCD_A0 + #define DOGLCD_A0 23 + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #undef BEEPER_PIN + #define BEEPER_PIN 33 + #undef LCD_BACKLIGHT_PIN + #define LCD_BACKLIGHT_PIN 67 + #endif + #elif ENABLED(MINIPANEL) + #undef BEEPER_PIN + #define BEEPER_PIN 33 + #undef DOGLCD_A0 + #define DOGLCD_A0 42 + #endif + +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h b/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h new file mode 100644 index 0000000..f342eff --- /dev/null +++ b/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h @@ -0,0 +1,279 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Arduino Mega for Tronxy X5S-2E, etc. + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "TRONXY-V3-1.0 supports only 2 hotends/E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "TRONXY-V3-1.0" + +// +// Servos +// +#define SERVO1_PIN 12 // 2560 PIN 25/PB6 + +// +// Import RAMPS 1.4 pins +// +#include "pins_RAMPS.h" + +/** + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * ===== AUX-1 connector ===== + * + * 2 4 6 8 + * #----------------# + * #2 | ° ° ° ° | + * #1 | ° ° ° ° | + * NOTCH #------ ------# + * 1 3 5 7 + * + * ################################### + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################### + * # 1 | VCC | + # + * # 2 | VCC | + # + * # 3 | GND | - # + * # 4 | GND | - # + * # 5 | N/C | # + * # 6 | 3 / PE1 (TXD0) | D1 # + * # 7 | N/C | # + * # 8 | 2 / PE0 (RXD0) | D0 # + * ################################### + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * ===== Limit Switch connectors ===== + * + * ############## X+ ################# + * X+ # Pin | ATMEGA2560 Pin | Arduino # + * 1 2 3 ################################### + * #- --- -# # 1 | 6 / PE4 (INT4) | D2 # + * | ° ° ° | # 2 | GND | - # + * #-------# # 3 | VCC | + # + * ################################### + * + * ############## X- ################# + * X- # Pin | ATMEGA2560 Pin | Arduino # + * 1 2 3 ################################### + * #- --- -# # 1 | 7 / PE5 (INT5) | D3 # + * | ° ° ° | # 2 | GND | - # + * #-------# # 3 | VCC | + # + * ################################### + * + * ############## Y+ ################# + * Y+ # Pin | ATMEGA2560 Pin | Arduino # + * 1 2 3 ################################### + * #- --- -# # 1 | 63/PJ0 (PCINT9) | D15 # + * | ° ° ° | # 2 | GND | - # + * #-------# # 3 | VCC | + # + * ################################### + * + * ############## Y- ################# + * Y- # Pin | ATMEGA2560 Pin | Arduino # + * 1 2 3 ################################### + * #- --- -# # 1 | 64/PJ1 (PCINT10)| D14 # + * | ° ° ° | # 2 | GND | - # + * #-------# # 3 | VCC | + # + * ################################### + * + * ############## Z+ ################# + * Z+ # Pin | ATMEGA2560 Pin | Arduino # + * 1 2 3 ################################### + * #- --- -# # 1 | 45 / PD2 (INT2) | D19 # + * | ° ° ° | # 2 | GND | - # + * #-------# # 3 | VCC | + # + * ################################### + * + * ############## Z- ################# + * Z- # Pin | ATMEGA2560 Pin | Arduino # + * 1 2 3 ################################### + * #- --- -# # 1 | 46 / PD3 (INT3) | D18 # + * | ° ° ° | # 2 | GND | - # + * #-------# # 3 | VCC | + # + * ################################### + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * ===== EXP1/EXP2 connectors ===== + * + * (NOTE ORDER) EXP2 EXP1 + * 2 4 6 8 10 2 4 6 8 10 + * #-------------------# #-------------------# + * #2 | ° ° ° ° ° | #2 | ° ° ° ° ° | + * #1 | ° ° ° ° ° | #1 | ° ° ° ° ° | + * NOTCH #-------- -------# NOTCH #-------- -------# + * 1 3 5 7 9 1 3 5 7 9 + * + * ############# EXP1 ################ + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################### + * # 1 | 53 / PC0 | D37 # + * # 2 | 55 / PC2 | D35 # + * # 3 | 12 / PH0 (RXD2) | D17 # + * # 4 | 13 / PH1 (TXD2) | D16 # + * # 5 | 77 / PA1 | D23 # + * # 6 | 75 / PA3 | D25 # + * # 7 | 73 / PA5 | D27 # + * # 8 | 71 / PA7 | D29 # + * # 9 | GND | - # + * # 10 | VCC | + # + * ################################### + * + * ############# EXP2 ################ + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################### + * # 1 | 22 / PB3 (MISO) | D50 # + * # 2 | 20 / PB1 (SCK) | D52 # + * # 3 | 59 / PC6 | D31 # + * # 4 | N/C | # + * # 5 | 57 / PC4 | D33 # + * # 6 | 21 / PB2 (MOSI) | D51 # + * # 7 | N/C | # + * # 8 | 30 / !RESET | RESET # + * # 9 | GND | - # + * # 10 | 51 / PG0 | D41 # + * ################################### + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * ===== ICSP connector ===== + * + * 2 4 6 + * #---------# + * | ° ° ° | + * | ° ° ° | + * #---------# + * 1 3 5 + * + * ################################## + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################## + * # 1 | 22 / PB3 (MISO)| 50 # + * # 2 | VCC | + # + * # 3 | 20 / PB1 (SCK) | 52 # + * # 4 | 21 / PB2 (MOSI)| 51 # + * # 5 | 30 / !RESET | RESET # + * # 6 | GND | - # + * ################################## + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * ===== SERVOS connector ===== + * + * 2 4 6 + * #---------# + * | ° ° ° | + * | ° ° ° | + * #---------# + * 1 3 5 + * + * ################################## + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################## + * # 1 | 25 / PB6 (OC1B)| D12 # + * # 2 | 24 / PB5 (OC1A)| D11 # + * # 3 | GND | - # + * # 4 | GND | - # + * # 5 | VCC | + # + * # 6 | VCC | + # + * ################################## + * + * NOTE: Pins 1 and 2 are the ones closest to the "L" and "PWR" LEDs. + * + * NOTE: Check servo wiring before connecting, for example: + * + Airtronics (non-Z) use: Red = +; Black = -; Black & White, White or Orange = signal. + * + Airtronics-Z use: Red = +; Black = -; Blue = signal. + * + Futaba use: Red = +; Black = -; White = signal. + * + Hitec use: Red = +; Black = -; Yellow = signal. + * + JR use: Red = +; Brown = -; Orange = signal. + * + * NOTE: Test your servo limits: + * Due to effects of component tolerances and/or age, the usable range of S-values for individual servos may be less than the settable 0-255 range. For example: + * 1. One servo may have a fully usable range of M280 P0 S0 through M280 P0 S255. + * 2. A different servo (of the same brand and model) may have a usable range of only M280 P0 S0 through M280 P0 S165 after which you experience binding. + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * ===== Thermistor connectors ===== + * + * (NOTE ORDER) TH2 TH1 TB + * 1 2 1 2 1 2 + * #- -# #- -# #- -# + * | ° ° | | ° ° | | ° ° | + * #-----# #-----# #-----# + * + * ############## TB ################# + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################### + * # 1 | GND | - # + * # 2 | 83 / PK6 (ADC14)| A14 # + * ################################### + * + * ############## TH1 ################ + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################### + * # 1 | GND | - # + * # 2 | 84 / PK5 (ADC13)| A13 # + * ################################### + * + * ############## TH2 ################ + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################### + * # 1 | GND | - # + * # 2 | 82 / PK7 (ADC15)| A15 # + * ################################### + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + * + * ===== XS3 connector ===== + * + * 2 4 6 + * #---------# + * | ° ° ° | + * | ° ° ° | + * #---------# + * 1 3 5 + * + * ################################## + * # Pin | ATMEGA2560 Pin | Arduino # + * ################################## + * # 1 | 85 / ADC12 | A12 # + * # 2 | 86 / ADC11 | A11 # + * # 3 | GND | - # + * # 4 | GND | - # + * # 5 | VCC | + # + * # 6 | VCC | + # + * ################################## + * + * NOTE: Pins 1 and 2 are the ones closest to the "L" and "PWR" LEDs. + * + * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ + */ diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h new file mode 100644 index 0000000..ca40255 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h @@ -0,0 +1,519 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#if HOTENDS > 5 || E_STEPPERS > 5 + #error "TTOSCAR supports up to 5 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "TT OSCAR" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +// +// Servos +// +#define SERVO0_PIN 11 +#define SERVO1_PIN 12 +#define SERVO2_PIN 5 +#define SERVO3_PIN 4 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN SERVO3_PIN +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#define X_CS_PIN 57 + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#define Y_CS_PIN 58 + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#define Z_CS_PIN 53 + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#define E0_CS_PIN 49 + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#define E1_CS_PIN E0_CS_PIN + +#define E2_STEP_PIN 63 +#define E2_DIR_PIN 22 +#define E2_ENABLE_PIN 59 +#define E2_CS_PIN E0_CS_PIN + +#define E3_STEP_PIN 32 +#define E3_DIR_PIN 40 +#define E3_ENABLE_PIN 39 +#define E3_CS_PIN E0_CS_PIN + +#define E4_STEP_PIN 43 +#define E4_DIR_PIN 42 +#define E4_ENABLE_PIN 47 +#define E4_CS_PIN E0_CS_PIN + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + + #define X_SERIAL_TX_PIN -1 // 59 + #define X_SERIAL_RX_PIN -1 // 63 + #define X2_SERIAL_TX_PIN -1 + #define X2_SERIAL_RX_PIN -1 + + #define Y_SERIAL_TX_PIN -1 // 64 + #define Y_SERIAL_RX_PIN -1 // 40 + #define Y2_SERIAL_TX_PIN -1 + #define Y2_SERIAL_RX_PIN -1 + + #define Z_SERIAL_TX_PIN -1 // 44 + #define Z_SERIAL_RX_PIN -1 // 42 + #define Z2_SERIAL_TX_PIN -1 + #define Z2_SERIAL_RX_PIN -1 + + #define E0_SERIAL_TX_PIN -1 // 66 + #define E0_SERIAL_RX_PIN -1 // 65 + #define E1_SERIAL_TX_PIN -1 + #define E1_SERIAL_RX_PIN -1 + #define E2_SERIAL_TX_PIN -1 + #define E2_SERIAL_RX_PIN -1 + #define E3_SERIAL_TX_PIN -1 + #define E3_SERIAL_RX_PIN -1 + #define E4_SERIAL_TX_PIN -1 + #define E4_SERIAL_RX_PIN -1 + #define E5_SERIAL_RX_PIN -1 + #define E6_SERIAL_RX_PIN -1 + #define E7_SERIAL_RX_PIN -1 +#endif + +// +// Default pins for TMC software SPI +// +//#if ENABLED(TMC_USE_SW_SPI) +// #ifndef TMC_SW_MOSI +// #define TMC_SW_MOSI 66 +// #endif +// #ifndef TMC_SW_MISO +// #define TMC_SW_MISO 44 +// #endif +// #ifndef TMC_SW_SCK +// #define TMC_SW_SCK 64 +// #endif +//#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 +#define TEMP_1_PIN 15 +#define TEMP_2_PIN 10 +#define TEMP_3_PIN 11 +#define TEMP_BED_PIN 14 + +#if TEMP_SENSOR_CHAMBER > 0 + #define TEMP_CHAMBER_PIN 12 +#else + #define TEMP_4_PIN 12 +#endif + +// SPI for Max6675 or Max31855 Thermocouple +//#if DISABLED(SDSUPPORT) +// #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card +//#else +// #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) +//#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 44 +#define HEATER_BED_PIN 8 + +#define FAN_PIN 9 + +#if EXTRUDERS >= 5 + #define HEATER_4_PIN 6 +#else + #define FAN1_PIN 6 +#endif + +#if EXTRUDERS >= 4 + #define HEATER_3_PIN 45 +#else + #define FAN2_PIN 45 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 + +//#ifndef FILWIDTH_PIN +// #define FILWIDTH_PIN 5 // Analog Input +//#endif + +// DIO 4 (Servos plug) for the runout sensor. +//#define FIL_RUNOUT_PIN SERVO3_PIN + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 +#endif + +// +// Case Light +// +#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN) + #if !NUM_SERVOS // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM + #elif HAS_FREE_AUX2_PINS // Try to use AUX 2 + #define CASE_LIGHT_PIN 44 // Hardware PWM + #endif +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE) + #if !NUM_SERVOS // Prefer the servo connector + #define SPINDLE_LASER_ENABLE_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 + #elif HAS_FREE_AUX2_PINS // Try to use AUX 2 + #define SPINDLE_LASER_ENABLE_PIN 40 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 + #endif +#endif + +// +// Průša i3 MK2 Multiplexer Support +// +//#ifndef E_MUX0_PIN +// #define E_MUX0_PIN 58 // Y_CS_PIN +//#endif +//#ifndef E_MUX1_PIN +// #define E_MUX1_PIN 53 // Z_CS_PIN +//#endif +//#ifndef E_MUX2_PIN +// #define E_MUX2_PIN 49 // En_CS_PIN +//#endif + +////////////////////////// +// LCDs and Controllers // +////////////////////////// + +#if HAS_WIRED_LCD + + // + // LCD Display output pins + // + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock + + #elif BOTH(IS_NEWPANEL, PANEL_ONE) + + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 65 + #define LCD_PINS_D5 66 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 64 + + #elif ENABLED(ZONESTAR_LCD) + + #define LCD_PINS_RS 64 + #define LCD_PINS_ENABLE 44 + #define LCD_PINS_D4 63 + #define LCD_PINS_D5 40 + #define LCD_PINS_D6 42 + #define LCD_PINS_D7 65 + #define ADC_KEYPAD_PIN 12 + + #else + + #if ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 25 + + #if !IS_NEWPANEL + #define BEEPER_PIN 37 + #endif + + #else + + #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) + #define LCD_PINS_DC 25 // Set as output on init + #define LCD_PINS_RS 27 // Pull low for 1s to init + // DOGM SPI LCD Support + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 17 + #define DOGLCD_SCK 23 + #define DOGLCD_A0 LCD_PINS_DC + #else + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #endif + + #define LCD_PINS_D7 29 + + #if !IS_NEWPANEL + #define BEEPER_PIN 33 + #endif + + #endif + + #if !IS_NEWPANEL + // Buttons attached to a shift register + // Not wired yet + //#define SHIFT_CLK_PIN 38 + //#define SHIFT_LD_PIN 42 + //#define SHIFT_OUT_PIN 40 + //#define SHIFT_EN_PIN 17 + #endif + + #endif + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + // + // LCD Display input pins + // + #if IS_NEWPANEL + + #if IS_RRD_SC + + #define BEEPER_PIN 37 + + #if ENABLED(CR10_STOCKDISPLAY) + #define BTN_EN1 17 + #define BTN_EN2 23 + #else + #define BTN_EN1 31 + #define BTN_EN2 33 + #endif + + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + //#define KILL_PIN 41 + + #if ENABLED(BQ_LCD_SMART_CONTROLLER) + #define LCD_BACKLIGHT_PIN 39 + #endif + + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS 53 + //#define KILL_PIN 41 + + #elif ENABLED(LCD_I2C_VIKI) + + #define BTN_EN1 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_ENC -1 + + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 + + #elif EITHER(VIKI2, miniVIKI) + + #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define LCD_SCREEN_ROT_180 + + #define BEEPER_PIN 33 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 + + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 + + #define SDSS 53 + #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board + //#define KILL_PIN 31 + + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 + + #define BEEPER_PIN 23 + #define LCD_BACKLIGHT_PIN 33 + + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 + + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 + //#define KILL_PIN 41 + + #elif ENABLED(MKS_MINI_12864) + + #define DOGLCD_A0 27 + #define DOGLCD_CS 25 + + // GLCD features + //#define LCD_CONTRAST_INIT 190 + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #define BEEPER_PIN 37 + + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + //#define SDSS 53 + #define SD_DETECT_PIN 49 + //#define KILL_PIN 64 + + #elif ENABLED(MINIPANEL) + + #define BEEPER_PIN 42 + // not connected to a pin + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + + // GLCD features + //#define LCD_CONTRAST_INIT 190 + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 + + #define SDSS 53 + #define SD_DETECT_PIN 49 + //#define KILL_PIN 64 + + #else + + // Beeper on AUX-4 + #define BEEPER_PIN 33 + + // Buttons are directly attached to AUX-2 + #if IS_RRW_KEYPAD + #define SHIFT_OUT_PIN 40 + #define SHIFT_CLK_PIN 44 + #define SHIFT_LD_PIN 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #elif ENABLED(PANEL_ONE) + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 + #else + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 + #endif + + #if ENABLED(G3D_PANEL) + #define SD_DETECT_PIN 49 + //#define KILL_PIN 41 + #endif + + #endif + + #endif // IS_NEWPANEL + +#endif diff --git a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h new file mode 100644 index 0000000..211cadd --- /dev/null +++ b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h @@ -0,0 +1,142 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Ultiboard v2.0 pin assignments + */ + +/** + * Rev B 2 JAN 2017 + * + * Added pin definitions for: + * M3, M4 & M5 spindle control commands + * case light + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Ultimaker 2.x" +#define DEFAULT_MACHINE_NAME "Ultimaker" +#define DEFAULT_SOURCE_CODE_URL "github.com/Ultimaker/Marlin" + +// +// Limit Switches +// +#define X_STOP_PIN 22 +#define Y_STOP_PIN 26 +#define Z_STOP_PIN 29 + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 32 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 31 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 36 +#define Z_ENABLE_PIN 34 + +#define E0_STEP_PIN 42 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 37 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +#define MOTOR_CURRENT_PWM_XY_PIN 44 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 46 +// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range +#ifndef MOTOR_CURRENT_PWM_RANGE + #define MOTOR_CURRENT_PWM_RANGE 2000 +#endif +#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} + +// +// Temperature Sensors +// +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN 77 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define SD_DETECT_PIN 39 +#define LED_PIN 8 +#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered +#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. + +// +// LCD / Controller +// +#define BEEPER_PIN 18 + +#define LCD_PINS_RS 20 +#define LCD_PINS_ENABLE 15 +#define LCD_PINS_D4 14 +#define LCD_PINS_D5 21 +#define LCD_PINS_D6 5 +#define LCD_PINS_D7 6 + +// Buttons are directly attached +#define BTN_EN1 40 +#define BTN_EN2 41 +#define BTN_ENC 19 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER // use the LED_PIN for spindle speed control or case light + #undef LED_PIN + #define SPINDLE_DIR_PIN 16 + #define SPINDLE_LASER_ENA_PIN 17 // Pullup! + #define SPINDLE_LASER_PWM_PIN 8 // Hardware PWM +#else + #undef LED_PIN + #define CASE_LIGHT_PIN 8 +#endif diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER.h b/Marlin/src/pins/ramps/pins_ULTIMAKER.h new file mode 100644 index 0000000..22c7fd9 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER.h @@ -0,0 +1,168 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Ultimaker pin assignments + */ + +/** + * Rev B 2 JAN 2017 + * + * Added pin definitions for: + * M3, M4 & M5 spindle control commands + * case light + */ + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Ultimaker" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME +#define DEFAULT_SOURCE_CODE_URL "github.com/Ultimaker/Marlin" + +// +// Servos +// +#define SERVO0_PIN 11 + +// +// Limit Switches +// +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 35 + +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing. + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN 8 +#endif + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + + #define BEEPER_PIN 18 + + #if IS_NEWPANEL + + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + + // Buttons directly attached + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 + + #define SD_DETECT_PIN 38 + + #else // !IS_NEWPANEL - Old style panel with shift register + + // Buttons attached to a shift register + #define SHIFT_CLK_PIN 38 + #define SHIFT_LD_PIN 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_EN_PIN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 + + #define SD_DETECT_PIN -1 + + #endif // !IS_NEWPANEL + +#endif // HAS_WIRED_LCD + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 10 // Pullup! +#define SPINDLE_DIR_PIN 11 // use the EXP3 PWM header diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h new file mode 100644 index 0000000..37c28ec --- /dev/null +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h @@ -0,0 +1,274 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Ultimaker pin assignments (Old electronics) + */ + +/** + * Rev B 3 JAN 2017 + * + * Details on pin definitions for M3, M4 & M5 spindle control commands and for + * the CASE_LIGHT_PIN are at the end of this file. + * + * This started out as an attempt to add pin definitions for M3, M4 & M5 spindle + * control commands but quickly turned into a head scratcher as the sources for + * the revisions provided inconsistent information. + * + * As best I can determine: + * 1.5.3 boards should use the pins_ULTIMAKER.h file which means the BOARD_INFO_NAME + * define in this file should say 1.5.3 rather than 1.5.4 + * This file is meant for 1.1 - 1.3 boards. + * The endstops for the 1.0 boards use different definitions than on the 1.1 - 1.3 + * boards. + * + * I've added sections that have the 1.0 and 1.5.3 + endstop definitions so you can + * easily switch if needed. I've also copied over the 1.5.3 + LCD definitions. + * + * To be 100% sure of the board you have: + * 1. In Configuration_adv.h enable "PINS_DEBUGGING" + * 2. Compile & uploade + * 3. Enter the command "M43 W1 I1". This command will report that pin nmumber and + * name of any pin that changes state. + * 4. Using a 1k (approximately) resistor pull the endstops and some of the LCD pins + * to ground and see what is reported. + * 5. If the reported pin doesn't match the file then try a different board revision + * and repeat steps 2 - 5 + */ + +#define BOARD_REV_1_1_TO_1_3 +//#define BOARD_REV_1_0 +//#define BOARD_REV_1_5 + +#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#ifdef BOARD_REV_1_1_TO_1_3 + #define BOARD_INFO_NAME "Ultimaker 1.1-1.3" +#elif defined(BOARD_REV_1_0) + #define BOARD_INFO_NAME "Ultimaker 1.0" +#elif defined(BOARD_REV_1_5) + #define BOARD_INFO_NAME "Ultimaker 1.5" +#else + #define BOARD_INFO_NAME "Ultimaker 1.5.4+" +#endif +#define DEFAULT_MACHINE_NAME "Ultimaker" +#define DEFAULT_SOURCE_CODE_URL "github.com/Ultimaker/Marlin" + +// +// Limit Switches +// +#if ENABLED(BOARD_REV_1_1_TO_1_3) + #define X_MIN_PIN 15 // SW1 + #define X_MAX_PIN 14 // SW2 + #define Y_MIN_PIN 17 // SW3 + #define Y_MAX_PIN 16 // SW4 + #define Z_MIN_PIN 19 // SW5 + #define Z_MAX_PIN 18 // SW6 +#endif + +#if ENABLED(BOARD_REV_1_0) + #if HAS_CUTTER + #define X_STOP_PIN 13 // SW1 (didn't change) - also has a useable hardware PWM + #define Y_STOP_PIN 12 // SW2 + #define Z_STOP_PIN 11 // SW3 + #else + #define X_MIN_PIN 13 // SW1 + #define X_MAX_PIN 12 // SW2 + #define Y_MIN_PIN 11 // SW3 + #define Y_MAX_PIN 10 // SW4 + #define Z_MIN_PIN 9 // SW5 + #define Z_MAX_PIN 8 // SW6 + #endif +#endif + +#if ENABLED(BOARD_REV_1_5) + #define X_MIN_PIN 22 + #define X_MAX_PIN 24 + #define Y_MIN_PIN 26 + #define Y_MAX_PIN 28 + #define Z_MIN_PIN 30 + #define Z_MAX_PIN 32 +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#if !defined(Z_MIN_PROBE_PIN) && !BOTH(HAS_CUTTER, BOARD_REV_1_0) + #define Z_MIN_PROBE_PIN Z_MAX_PIN +#endif + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 35 + +#if BOTH(HAS_CUTTER, BOARD_REV_1_1_TO_1_3) && EXTRUDERS == 1 + // Move E0 to the spare and get Spindle/Laser signals from E0 + #define E0_STEP_PIN 49 + #define E0_DIR_PIN 47 + #define E0_ENABLE_PIN 48 +#else + #define E0_STEP_PIN 43 + #define E0_DIR_PIN 45 + #define E0_ENABLE_PIN 41 + + #define E1_STEP_PIN 49 + #define E1_DIR_PIN 47 + #define E1_ENABLE_PIN 48 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 1 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +//#define HEATER_1_PIN 3 // used for case light Rev A said "1" +#define HEATER_BED_PIN 4 + +// +// LCD / Controller +// +#if ANY(BOARD_REV_1_0, BOARD_REV_1_1_TO_1_3) + + #define LCD_PINS_RS 24 + #define LCD_PINS_ENABLE 22 + #define LCD_PINS_D4 36 + #define LCD_PINS_D5 34 + #define LCD_PINS_D6 32 + #define LCD_PINS_D7 30 + +#elif BOTH(BOARD_REV_1_5, IS_ULTRA_LCD) + + #define BEEPER_PIN 18 + + #if IS_NEWPANEL + + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + + // Buttons directly attached + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 + + #define SD_DETECT_PIN 38 + + #else // !IS_NEWPANEL - Old style panel with shift register + + // Buttons attached to a shift register + #define SHIFT_CLK_PIN 38 + #define SHIFT_LD_PIN 42 + #define SHIFT_OUT_PIN 40 + #define SHIFT_EN_PIN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 + + #endif // !IS_NEWPANEL + +#endif + +// +// case light - see spindle section for more info on available hardware PWMs +// +#if !PIN_EXISTS(CASE_LIGHT) && ENABLED(BOARD_REV_1_5) + #define CASE_LIGHT_PIN 7 // use PWM - MUST BE HARDWARE PWM +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER + #if EITHER(BOARD_REV_1_0, BOARD_REV_1_5) // Use the last three SW positions + #define SPINDLE_DIR_PIN 10 // 1.0: SW4 1.5: EXP3-6 ("10") + #define SPINDLE_LASER_PWM_PIN 9 // 1.0: SW5 1.5: EXP3-7 ( "9") .. MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENA_PIN 8 // 1.0: SW6 1.5: EXP3-8 ( "8") .. Pin should have a pullup! + #elif ENABLED(BOARD_REV_1_1_TO_1_3) + /** + * Only four hardware PWMs physically connected to anything on these boards: + * + * HEATER_0_PIN 2 silkscreen varies - usually "PWM 1" or "HEATER1" + * HEATER_1_PIN 3 silkscreen varies - usually "PWM 2" or "HEATER2" + * HEATER_BED_PIN 4 silkscreen varies - usually "PWM 3" or "HEATED BED" + * E0_DIR_PIN 45 + * + * If one of the heaters is used then special precautions will usually be needed. + * They have an LED and resistor pullup to +24V which could damage 3.3V-5V ICs. + */ + #if EXTRUDERS == 1 + #define SPINDLE_DIR_PIN 43 + #define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 41 // Pullup! + #elif TEMP_SENSOR_BED == 0 // Can't use E0 so see if HEATER_BED_PIN is available + #undef HEATER_BED_PIN + #define SPINDLE_DIR_PIN 38 // Probably pin 4 on 10 pin connector closest to the E0 socket + #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM - Special precautions usually needed. + #define SPINDLE_LASER_ENA_PIN 40 // Pullup! (Probably pin 6 on the 10-pin + // connector closest to the E0 socket) + #endif + #endif +#endif + +/** + * Where to get the spindle signals on the E0 socket + * + * spindle signal socket name socket name + * ------- + * SPINDLE_LASER_ENA_PIN /ENABLE *| |O VMOT + * MS1 O| |O GND + * MS2 O| |O 2B + * MS3 O| |O 2A + * /RESET O| |O 1A + * /SLEEP O| |O 1B + * SPINDLE_DIR_PIN STEP O| |O VDD + * SPINDLE_LASER_PWM_PIN DIR O| |O GND + * ------- + * * - pin closest to MS1, MS2 & MS3 jumpers on the board + * + * Note: Socket names vary from vendor to vendor. + */ diff --git a/Marlin/src/pins/ramps/pins_VORON.h b/Marlin/src/pins/ramps/pins_VORON.h new file mode 100644 index 0000000..9ab6573 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_VORON.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * VORON Design v2 pin assignments + * See https://github.com/mzbotreprap/VORON/blob/master/Firmware/Marlin/pins_RAMPS_VORON.h + */ + +#define BOARD_INFO_NAME "VORON Design v2" + +#define RAMPS_D8_PIN 11 + +#include "pins_RAMPS.h" + +// +// Heaters / Fans +// +#undef FAN_PIN +#define FAN_PIN 5 // Using the pin for the controller fan since controller fan is always on. +#define CONTROLLER_FAN_PIN 8 + +// +// Auto fans +// +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN 6 // Servo pin 6 for E3D Fan +#endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN 6 // Servo pin 6 for E3D Fan (same pin for both extruders since it's the same fan) +#endif + +// +// LCDs and Controllers +// +#undef BEEPER_PIN diff --git a/Marlin/src/pins/ramps/pins_ZRIB_V20.h b/Marlin/src/pins/ramps/pins_ZRIB_V20.h new file mode 100644 index 0000000..6c4b28d --- /dev/null +++ b/Marlin/src/pins/ramps/pins_ZRIB_V20.h @@ -0,0 +1,87 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * ZRIB V2.0 & V3.0 pin assignments + * V2 and V3 Boards only differ in USB controller, nothing affecting the pins. + */ + +#include "pins_MKS_GEN_13.h" + +#define ZRIB_V20_D6_PIN 6 // Fan +#define ZRIB_V20_D9_PIN 9 // Fan2 +#define ZRIB_V20_A10_PIN 10 +#define ZRIB_V20_D16_PIN 16 +#define ZRIB_V20_D17_PIN 17 +#define ZRIB_V20_D23_PIN 23 +#define ZRIB_V20_D25_PIN 25 +#define ZRIB_V20_D27_PIN 27 +#define ZRIB_V20_D29_PIN 29 +#define ZRIB_V20_D37_PIN 37 + +// +// Auto fans +// +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#endif +#ifndef E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#endif +#ifndef E2_AUTO_FAN_PIN + #define E2_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#endif +#ifndef E3_AUTO_FAN_PIN + #define E3_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#endif + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 11 // Analog Input +#endif + +#if ENABLED(ZONESTAR_LCD) + #undef LCD_PINS_RS + #undef LCD_PINS_ENABLE + #undef LCD_PINS_D4 + #undef LCD_PINS_D5 + #undef LCD_PINS_D6 + #undef LCD_PINS_D7 + #undef ADC_KEYPAD_PIN + #undef BEEPER_PIN + + #undef SHIFT_OUT_PIN + #undef SHIFT_CLK_PIN + #undef SHIFT_LD_PIN + #undef BTN_EN1 + #undef BTN_EN2 + #undef BTN_ENC + + #define LCD_PINS_RS ZRIB_V20_D16_PIN + #define LCD_PINS_ENABLE ZRIB_V20_D17_PIN + #define LCD_PINS_D4 ZRIB_V20_D23_PIN + #define LCD_PINS_D5 ZRIB_V20_D25_PIN + #define LCD_PINS_D6 ZRIB_V20_D27_PIN + #define LCD_PINS_D7 ZRIB_V20_D29_PIN + #define ADC_KEYPAD_PIN ZRIB_V20_A10_PIN + #define BEEPER_PIN ZRIB_V20_D37_PIN +#endif diff --git a/Marlin/src/pins/ramps/pins_ZRIB_V52.h b/Marlin/src/pins/ramps/pins_ZRIB_V52.h new file mode 100644 index 0000000..983c840 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_ZRIB_V52.h @@ -0,0 +1,159 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * ZRIB V5.2 Based on MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "ZRIB V5.2 only supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "ZRIB V5.2" + +#define MKS_BASE_VERSION 14 +#define IS_RAMPS_EFB + +// +// Heaters / Fans +// +#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9 +#define FAN1_PIN 6 + +// +// Extra Extruder / Stepper for V5.2 +// +#define E2_STEP_PIN 4 +#define E2_DIR_PIN 5 +#define E2_ENABLE_PIN 22 + +#include "pins_MKS_BASE_common.h" + +/* + Available connectors on MKS BASE v1.4 (Basically same as ZRIB V5.2) + + ======= + | GND | + |-----| E0 + | 10 | (10) PB4 ** Pin23 ** PWM10 + |-----| + | GND | + |-----| E1 + | 7 | ( 7) PH4 ** Pin16 ** PWM7 + |-----| + | GND | + |-----| FAN + | 9 | ( 9) PH6 ** Pin18 ** PWM9 + ======= + + ======= + | GND | + |-----| Heated Bed + | 8 | ( 8) PH5 ** Pin17 ** PWM8 + ======= + + ========== + | 12-24V | + |--------| Power + | GND | + ========== + + XS3 Connector + ================= + | 65 | GND | 5V | (65) PK3 ** Pin86 ** A11 + |----|-----|----| + | 66 | GND | 5V | (66) PK4 ** Pin85 ** A12 + ================= + + Servos Connector + ================= + | 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11 + |----|-----|----| + | 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12 + ================= + + ICSP + ================= + | 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI + |----|----|-----| + | 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO + ================= (52) PB1 ** Pin20 ** SPI_SCK + + XS6/AUX-1 Connector + ====================== + | 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA + |----|-----|----|----| + | 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO + ====================== (51) PB2 ** Pin21 ** SPI_MOSI + (52) PB1 ** Pin20 ** SPI_SCK + (21) PD0 ** Pin43 ** I2C_SCL + + Temperature + ================================== + | GND | 69 | GND | 68 | GND | 67 | + ================================== + (69) PK7 ** Pin82 ** A15 + (68) PK6 ** Pin83 ** A14 + (67) PK5 ** Pin84 ** A13 + + Limit Switches + ============ + | 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2 + |----|-----| + | 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3 + |----|-----| + | 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX + |----|-----| + | 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX + |----|-----| + | 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX + |----|-----| + | 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX + ============ + + EXP1 + ============ + | 37 | 35 | (37) PC0 ** Pin53 ** D37 + |-----|----| (35) PC2 ** Pin55 ** D35 + | 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX + |-----|----| (16) PH1 ** Pin13 ** USART2_TX + | 23 | 25 | (23) PA1 ** Pin77 ** D23 + |-----|----| (25) PA3 ** Pin75 ** D25 + | 27 | 29 | (27) PA5 ** Pin73 ** D27 + |-----|----| (29) PA7 ** Pin71 ** D29 + | GND | 5V | + ============ + + EXP2 + ============ + | 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO + |-----|----| (52) PB1 ** Pin20 ** SPI_SCK + | 31 | 53 | (31) PC6 ** Pin59 ** D31 + |-----|----| (53) PB0 ** Pin19 ** SPI_SS + | 33 | 51 | (33) PC4 ** Pin57 ** D33 + |-----|----| (51) PB2 ** Pin21 ** SPI_MOSI + | 49 | 41 | (49) PL0 ** Pin35 ** D49 + |-----|----| (41) PG0 ** Pin51 ** D41 + | GND | NC | + ============ +*/ diff --git a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h new file mode 100644 index 0000000..096d970 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h @@ -0,0 +1,306 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Z-Bolt X Series board – based on Arduino Mega2560 + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 4 || E_STEPPERS > 4 + #error "Z-Bolt X Series board supports up to 4 hotends / E-steppers." +#endif + +#define BOARD_INFO_NAME "Z-Bolt X Series" + +// +// Servos +// +#ifndef SERVO0_PIN + #define SERVO0_PIN 11 +#endif +#ifndef SERVO3_PIN + #define SERVO3_PIN 4 +#endif + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#ifndef X_MAX_PIN + #define X_MAX_PIN 2 +#endif +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN -1 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN -1 +#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#ifndef Z_CS_PIN + #define Z_CS_PIN -1 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN -1 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN -1 +#endif + +// Red +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 40 +#define E2_ENABLE_PIN 65 +#ifndef E2_CS_PIN + #define E2_CS_PIN -1 +#endif + +// Black +#define E3_STEP_PIN 44 +#define E3_DIR_PIN 64 +#define E3_ENABLE_PIN 66 +#ifndef E3_CS_PIN + #define E3_CS_PIN -1 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_2_PIN 5 // Analog Input (BLACK) +#define TEMP_3_PIN 9 // Analog Input (RED) +#define TEMP_BED_PIN 14 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 6 +#define HEATER_3_PIN 5 +#define HEATER_BED_PIN 8 + +#define FAN_PIN 9 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 5 // Analog Input on AUX2 +#endif + +// Оn the servos connector +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 4 +#endif + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM + #elif HAS_FREE_AUX2_PINS + #define CASE_LIGHT_PIN 44 // Hardware PWM + #endif +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) + #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 + #elif HAS_FREE_AUX2_PINS + #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 + #endif +#endif + +// +// TMC software SPI +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI 66 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO 44 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK 64 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC220x stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + + #ifndef X_SERIAL_TX_PIN + #define X_SERIAL_TX_PIN 40 + #endif + #ifndef X_SERIAL_RX_PIN + #define X_SERIAL_RX_PIN 63 + #endif + #ifndef X2_SERIAL_TX_PIN + #define X2_SERIAL_TX_PIN -1 + #endif + #ifndef X2_SERIAL_RX_PIN + #define X2_SERIAL_RX_PIN -1 + #endif + + #ifndef Y_SERIAL_TX_PIN + #define Y_SERIAL_TX_PIN 59 + #endif + #ifndef Y_SERIAL_RX_PIN + #define Y_SERIAL_RX_PIN 64 + #endif + #ifndef Y2_SERIAL_TX_PIN + #define Y2_SERIAL_TX_PIN -1 + #endif + #ifndef Y2_SERIAL_RX_PIN + #define Y2_SERIAL_RX_PIN -1 + #endif + + #ifndef Z_SERIAL_TX_PIN + #define Z_SERIAL_TX_PIN 42 + #endif + #ifndef Z_SERIAL_RX_PIN + #define Z_SERIAL_RX_PIN 65 + #endif + #ifndef Z2_SERIAL_TX_PIN + #define Z2_SERIAL_TX_PIN -1 + #endif + #ifndef Z2_SERIAL_RX_PIN + #define Z2_SERIAL_RX_PIN -1 + #endif + + #ifndef E0_SERIAL_TX_PIN + #define E0_SERIAL_TX_PIN 44 + #endif + #ifndef E0_SERIAL_RX_PIN + #define E0_SERIAL_RX_PIN 66 + #endif + #ifndef E1_SERIAL_TX_PIN + #define E1_SERIAL_TX_PIN -1 + #endif + #ifndef E1_SERIAL_RX_PIN + #define E1_SERIAL_RX_PIN -1 + #endif + #ifndef E2_SERIAL_TX_PIN + #define E2_SERIAL_TX_PIN -1 + #endif + #ifndef E2_SERIAL_RX_PIN + #define E2_SERIAL_RX_PIN -1 + #endif + #ifndef E3_SERIAL_TX_PIN + #define E3_SERIAL_TX_PIN -1 + #endif + #ifndef E3_SERIAL_RX_PIN + #define E3_SERIAL_RX_PIN -1 + #endif + #ifndef E4_SERIAL_TX_PIN + #define E4_SERIAL_TX_PIN -1 + #endif + #ifndef E4_SERIAL_RX_PIN + #define E4_SERIAL_RX_PIN -1 + #endif + #ifndef E5_SERIAL_TX_PIN + #define E5_SERIAL_TX_PIN -1 + #endif + #ifndef E5_SERIAL_RX_PIN + #define E5_SERIAL_RX_PIN -1 + #endif + #ifndef E6_SERIAL_TX_PIN + #define E6_SERIAL_TX_PIN -1 + #endif + #ifndef E6_SERIAL_RX_PIN + #define E6_SERIAL_RX_PIN -1 + #endif + #ifndef E7_SERIAL_TX_PIN + #define E7_SERIAL_TX_PIN -1 + #endif + #ifndef E7_SERIAL_RX_PIN + #define E7_SERIAL_RX_PIN -1 + #endif +#endif |