Initial commit

1 files changed, 122 insertions, 0 deletions

diff --git a/Marlin/src/pins/ramps/pins_K8800.h b/Marlin/src/pins/ramps/pins_K8800.h
new file mode 100644
index 0000000..5388c96
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_K8800.h
@@ -0,0 +1,122 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Velleman K8800 (Vertex)
+ */
+
+#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME      "K8800"
+#define DEFAULT_MACHINE_NAME "Vertex Delta"
+
+//#define LCD_SCREEN_ROT_180
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                             3
+#define Y_STOP_PIN                            14
+#define Z_STOP_PIN                            66
+
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     68
+#endif
+
+#define FIL_RUNOUT_PIN                        69  // PK7
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            54
+#define X_DIR_PIN                             55
+#define X_ENABLE_PIN                          38
+
+#define Y_STEP_PIN                            60
+#define Y_DIR_PIN                             61
+#define Y_ENABLE_PIN                          56
+
+#define Z_STEP_PIN                            46
+#define Z_DIR_PIN                             48
+#define Z_ENABLE_PIN                          63
+
+#define E0_STEP_PIN                           26
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         24
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            13
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          10
+#define FAN_PIN                                8
+#define CONTROLLER_FAN_PIN                     9
+
+//
+// Misc. Functions
+//
+#define KILL_PIN                              20  // PD1
+#define CASE_LIGHT_PIN                         7
+
+//
+// SD Card
+//
+#define SDSS                                  25
+#define SD_DETECT_PIN                         21  // PD0
+
+//
+// LCD / Controller
+//
+#define BEEPER_PIN                             6
+
+#if HAS_WIRED_LCD
+
+  #define LCD_SDSS                            53
+
+  #define DOGLCD_CS                           29
+  #define DOGLCD_A0                           27
+
+  #define LCD_PINS_RS                         27
+  #define LCD_PINS_ENABLE                     29
+  #define LCD_PINS_D4                         37
+  #define LCD_PINS_D5                         35
+  #define LCD_PINS_D6                         33
+  #define LCD_PINS_D7                         31
+
+  #define LCD_CONTRAST_MIN                     0
+  #define LCD_CONTRAST_MAX                   100
+  #define DEFAULT_LCD_CONTRAST                30
+
+  #if IS_NEWPANEL
+    #define BTN_EN1                           17
+    #define BTN_EN2                           16
+    #define BTN_ENC                           23
+  #endif
+
+#endif // HAS_WIRED_LCD