Initial commit

1 files changed, 239 insertions, 0 deletions

diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
new file mode 100644
index 0000000..80e8f0d
--- /dev/null
+++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
@@ -0,0 +1,239 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * RAMPS-FD
+ *
+ * No EEPROM
+ * Use 4k7 thermistor tables
+ */
+
+#if NOT_TARGET(__SAM3X8E__)
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
+#endif
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "RAMPS-FD v1"
+#endif
+
+#define INVERTED_HEATER_PINS
+#define INVERTED_BED_PINS
+#define INVERTED_FAN_PINS
+
+//
+// Servos
+//
+#define SERVO0_PIN                             7
+#define SERVO1_PIN                             6
+#define SERVO2_PIN                             5
+#define SERVO3_PIN                             3
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                             22
+#define X_MAX_PIN                             30
+#define Y_MIN_PIN                             24
+#define Y_MAX_PIN                             38
+#define Z_MIN_PIN                             26
+#define Z_MAX_PIN                             34
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            63
+#define X_DIR_PIN                             62
+#define X_ENABLE_PIN                          48
+#ifndef X_CS_PIN
+  #define X_CS_PIN                            68
+#endif
+
+#define Y_STEP_PIN                            65
+#define Y_DIR_PIN                             64
+#define Y_ENABLE_PIN                          46
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                            60
+#endif
+
+#define Z_STEP_PIN                            67
+#define Z_DIR_PIN                             66
+#define Z_ENABLE_PIN                          44
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                            58
+#endif
+
+#define E0_STEP_PIN                           36
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         42
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                           67
+#endif
+
+#define E1_STEP_PIN                           43
+#define E1_DIR_PIN                            41
+#define E1_ENABLE_PIN                         39
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN                           61
+#endif
+
+#define E2_STEP_PIN                           32
+#define E2_DIR_PIN                            47
+#define E2_ENABLE_PIN                         45
+#ifndef E2_CS_PIN
+  #define E2_CS_PIN                           59
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             1  // Analog Input
+#define TEMP_1_PIN                             2  // Analog Input
+#define TEMP_2_PIN                             3  // Analog Input
+#define TEMP_BED_PIN                           0  // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#if DISABLED(SDSUPPORT)
+  #define MAX6675_SS_PIN                      53
+#else
+  #define MAX6675_SS_PIN                      49
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           9
+#define HEATER_1_PIN                          10
+#define HEATER_2_PIN                          11
+#define HEATER_BED_PIN                         8
+
+#ifndef FAN_PIN
+  #define FAN_PIN                             12
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                   4
+#define LED_PIN                               13
+
+//
+// LCD / Controller
+//
+#if HAS_WIRED_LCD
+  // ramps-fd lcd adaptor
+
+  #define BEEPER_PIN                          37
+  #define BTN_EN1                             33
+  #define BTN_EN2                             31
+  #define BTN_ENC                             35
+  #define SD_DETECT_PIN                       49
+
+  #if IS_NEWPANEL
+    #define LCD_PINS_RS                       16
+    #define LCD_PINS_ENABLE                   17
+  #endif
+
+  #if ENABLED(FYSETC_MINI_12864)
+    #define DOGLCD_CS            LCD_PINS_ENABLE
+    #define DOGLCD_A0                LCD_PINS_RS
+    #define DOGLCD_SCK                        76
+    #define DOGLCD_MOSI                       75
+
+    //#define FORCE_SOFT_SPI                      // Use this if default of hardware SPI causes display problems
+                                                  //   results in LCD soft SPI mode 3, SD soft SPI mode 0
+
+    #define LCD_RESET_PIN                     23  // Must be high or open for LCD to operate normally.
+
+    #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+      #ifndef RGB_LED_R_PIN
+        #define RGB_LED_R_PIN                 25
+      #endif
+      #ifndef RGB_LED_G_PIN
+        #define RGB_LED_G_PIN                 27
+      #endif
+      #ifndef RGB_LED_B_PIN
+        #define RGB_LED_B_PIN                 29
+      #endif
+    #elif ENABLED(FYSETC_MINI_12864_2_1)
+      #define NEOPIXEL_PIN                    25
+    #endif
+
+  #elif IS_NEWPANEL
+
+    #define LCD_PINS_D4                       23
+    #define LCD_PINS_D5                       25
+    #define LCD_PINS_D6                       27
+    #define LCD_PINS_D7                       29
+
+    #if ENABLED(MINIPANEL)
+      #define DOGLCD_CS                       25
+      #define DOGLCD_A0                       27
+    #endif
+
+  #endif
+
+  #if ANY(VIKI2, miniVIKI)
+    #define DOGLCD_A0                         16
+    #define KILL_PIN                          51
+    #define STAT_LED_BLUE_PIN                 29
+    #define STAT_LED_RED_PIN                  23
+    #define DOGLCD_CS                         17
+    #define DOGLCD_SCK                        76  // SCK_PIN   - Required for DUE Hardware SPI
+    #define DOGLCD_MOSI                       75  // MOSI_PIN
+    #define DOGLCD_MISO                       74  // MISO_PIN
+  #endif
+
+  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+    #define BTN_ENC_EN               LCD_PINS_D7  // Detect the presence of the encoder
+  #endif
+
+#endif // HAS_WIRED_LCD
+
+#if HAS_TMC_UART
+  /**
+   * TMC2208/TMC2209 stepper drivers
+   *
+   * Hardware serial communication ports.
+   * If undefined software serial is used according to the pins below
+   */
+  //#define X_HARDWARE_SERIAL  Serial1
+  //#define X2_HARDWARE_SERIAL Serial1
+  //#define Y_HARDWARE_SERIAL  Serial1
+  //#define Y2_HARDWARE_SERIAL Serial1
+  //#define Z_HARDWARE_SERIAL  Serial1
+  //#define Z2_HARDWARE_SERIAL Serial1
+  //#define E0_HARDWARE_SERIAL Serial1
+  //#define E1_HARDWARE_SERIAL Serial1
+  //#define E2_HARDWARE_SERIAL Serial1
+  //#define E3_HARDWARE_SERIAL Serial1
+  //#define E4_HARDWARE_SERIAL Serial1
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HOTENDS < 3 && HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
+  #define SPINDLE_LASER_ENA_PIN               45  // Use E2 ENA
+  #define SPINDLE_LASER_PWM_PIN               12  // Hardware PWM
+  #define SPINDLE_DIR_PIN                     47  // Use E2 DIR
+#endif