Initial commit

1 files changed, 179 insertions, 0 deletions

diff --git a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h
new file mode 100644
index 0000000..ea09618
--- /dev/null
+++ b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h
@@ -0,0 +1,179 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * ReprapWorld ULTRATRONICS v1.0
+ * https://reprapworld.com/documentation/datasheet_ultratronics10_05.pdf
+ */
+
+#if NOT_TARGET(ARDUINO_ARCH_SAM)
+  #error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Ultratronics v1.0"
+
+//
+// Servos
+//
+#if NUM_SERVOS > 0
+  #define SERVO0_PIN                          11
+  #if NUM_SERVOS > 1
+    #define SERVO1_PIN                        12
+  #endif
+#endif
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                             31
+#define X_MAX_PIN                             30
+#define Y_MIN_PIN                             12
+#define Y_MAX_PIN                             11
+#define Z_MIN_PIN                             29
+#define Z_MAX_PIN                             28
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            35
+#define X_DIR_PIN                             34
+#define X_ENABLE_PIN                          37
+#ifndef X_CS_PIN
+  #define X_CS_PIN                            18
+#endif
+
+#define Y_STEP_PIN                            22
+#define Y_DIR_PIN                             23
+#define Y_ENABLE_PIN                          33
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                            19
+#endif
+
+#define Z_STEP_PIN                            25
+#define Z_DIR_PIN                             26
+#define Z_ENABLE_PIN                          24
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                            16
+#endif
+
+#define E0_STEP_PIN                           47
+#define E0_DIR_PIN                            46
+#define E0_ENABLE_PIN                         48
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                           17
+#endif
+
+#define E1_STEP_PIN                           44
+#define E1_DIR_PIN                            36
+#define E1_ENABLE_PIN                         45
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN                           -1
+#endif
+
+#define E2_STEP_PIN                           42
+#define E2_DIR_PIN                            41
+#define E2_ENABLE_PIN                         43
+#ifndef E2_CS_PIN
+  #define E2_CS_PIN                           -1
+#endif
+
+#define E3_STEP_PIN                           39
+#define E3_DIR_PIN                            38
+#define E3_ENABLE_PIN                         40
+#ifndef E3_CS_PIN
+  #define E3_CS_PIN                           -1
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             0  // Analog Input
+#define TEMP_1_PIN                             2  // Analog Input
+#define TEMP_2_PIN                             3  // Analog Input
+#define TEMP_3_PIN                             4  // Analog Input
+#define TEMP_BED_PIN                           1  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           3
+#define HEATER_1_PIN                           8
+#define HEATER_2_PIN                           7
+#define HEATER_3_PIN                           9
+#define HEATER_BED_PIN                         2
+
+#ifndef FAN_PIN
+  #define FAN_PIN                              6
+#endif
+#define FAN2_PIN                               5
+
+//
+// Misc. Functions
+//
+#define SDSS                                  59
+#define SD_DETECT_PIN                         60
+#define LED_PIN                               13
+#define PS_ON_PIN                             32
+
+//
+// SPI Buses
+//
+
+#define DAC0_SYNC                             53  // PB14
+#define SPI_CHAN_DAC                           1
+
+#define SPI_CHAN_EEPROM1                      -1
+#define SPI_EEPROM1_CS                        -1
+#define SPI_EEPROM2_CS                        -1
+#define SPI_FLASH_CS                          -1
+
+#define SD_SCK_PIN                            76
+#define SD_MISO_PIN                           74
+#define SD_MOSI_PIN                           75
+
+// SPI for Max6675 or Max31855 Thermocouple
+#define MAX6675_SS_PIN                        65
+#define MAX31855_SS0                          65
+#define MAX31855_SS1                          52
+#define MAX31855_SS2                          50
+#define MAX31855_SS3                          51
+
+#define ENC424_SS                             61
+
+//
+// LCD / Controller
+//
+
+#define BEEPER_PIN                            27
+
+#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+  #define LCD_PINS_RS                         A8  // CS chip select / SS chip slave select
+  #define LCD_PINS_ENABLE                   MOSI  // SID (MOSI)
+  #define LCD_PINS_D4                        SCK  // SCK (CLK) clock
+
+  #define BTN_EN1                             20
+  #define BTN_EN2                             21
+  #define BTN_ENC                             64
+
+#endif // REPRAPWORLD_GRAPHICAL_LCD