diff options
Diffstat (limited to 'Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h')
| -rw-r--r-- | Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h | 179 |
1 files changed, 179 insertions, 0 deletions
diff --git a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h new file mode 100644 index 0000000..ea09618 --- /dev/null +++ b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h @@ -0,0 +1,179 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * ReprapWorld ULTRATRONICS v1.0 + * https://reprapworld.com/documentation/datasheet_ultratronics10_05.pdf + */ + +#if NOT_TARGET(ARDUINO_ARCH_SAM) + #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Ultratronics v1.0" + +// +// Servos +// +#if NUM_SERVOS > 0 + #define SERVO0_PIN 11 + #if NUM_SERVOS > 1 + #define SERVO1_PIN 12 + #endif +#endif + +// +// Limit Switches +// +#define X_MIN_PIN 31 +#define X_MAX_PIN 30 +#define Y_MIN_PIN 12 +#define Y_MAX_PIN 11 +#define Z_MIN_PIN 29 +#define Z_MAX_PIN 28 + +// +// Steppers +// +#define X_STEP_PIN 35 +#define X_DIR_PIN 34 +#define X_ENABLE_PIN 37 +#ifndef X_CS_PIN + #define X_CS_PIN 18 +#endif + +#define Y_STEP_PIN 22 +#define Y_DIR_PIN 23 +#define Y_ENABLE_PIN 33 +#ifndef Y_CS_PIN + #define Y_CS_PIN 19 +#endif + +#define Z_STEP_PIN 25 +#define Z_DIR_PIN 26 +#define Z_ENABLE_PIN 24 +#ifndef Z_CS_PIN + #define Z_CS_PIN 16 +#endif + +#define E0_STEP_PIN 47 +#define E0_DIR_PIN 46 +#define E0_ENABLE_PIN 48 +#ifndef E0_CS_PIN + #define E0_CS_PIN 17 +#endif + +#define E1_STEP_PIN 44 +#define E1_DIR_PIN 36 +#define E1_ENABLE_PIN 45 +#ifndef E1_CS_PIN + #define E1_CS_PIN -1 +#endif + +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 41 +#define E2_ENABLE_PIN 43 +#ifndef E2_CS_PIN + #define E2_CS_PIN -1 +#endif + +#define E3_STEP_PIN 39 +#define E3_DIR_PIN 38 +#define E3_ENABLE_PIN 40 +#ifndef E3_CS_PIN + #define E3_CS_PIN -1 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 2 // Analog Input +#define TEMP_2_PIN 3 // Analog Input +#define TEMP_3_PIN 4 // Analog Input +#define TEMP_BED_PIN 1 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 3 +#define HEATER_1_PIN 8 +#define HEATER_2_PIN 7 +#define HEATER_3_PIN 9 +#define HEATER_BED_PIN 2 + +#ifndef FAN_PIN + #define FAN_PIN 6 +#endif +#define FAN2_PIN 5 + +// +// Misc. Functions +// +#define SDSS 59 +#define SD_DETECT_PIN 60 +#define LED_PIN 13 +#define PS_ON_PIN 32 + +// +// SPI Buses +// + +#define DAC0_SYNC 53 // PB14 +#define SPI_CHAN_DAC 1 + +#define SPI_CHAN_EEPROM1 -1 +#define SPI_EEPROM1_CS -1 +#define SPI_EEPROM2_CS -1 +#define SPI_FLASH_CS -1 + +#define SD_SCK_PIN 76 +#define SD_MISO_PIN 74 +#define SD_MOSI_PIN 75 + +// SPI for Max6675 or Max31855 Thermocouple +#define MAX6675_SS_PIN 65 +#define MAX31855_SS0 65 +#define MAX31855_SS1 52 +#define MAX31855_SS2 50 +#define MAX31855_SS3 51 + +#define ENC424_SS 61 + +// +// LCD / Controller +// + +#define BEEPER_PIN 27 + +#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define LCD_PINS_RS A8 // CS chip select / SS chip slave select + #define LCD_PINS_ENABLE MOSI // SID (MOSI) + #define LCD_PINS_D4 SCK // SCK (CLK) clock + + #define BTN_EN1 20 + #define BTN_EN2 21 + #define BTN_ENC 64 + +#endif // REPRAPWORLD_GRAPHICAL_LCD |