Initial commit

1 files changed, 178 insertions, 0 deletions

diff --git a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
new file mode 100644
index 0000000..43dfdec
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
@@ -0,0 +1,178 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(TARGET_STM32F1)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#elif HOTENDS > 1 || E_STEPPERS > 1
+  #error "CCROBOT-ONLINE MEEB_3DP only supports one hotend / E-stepper. Comment out this line to continue."
+#endif
+
+// https://github.com/ccrobot-online/MEEB_3DP
+// Pin assignments for 32-bit MEEB_3DP
+#define BOARD_INFO_NAME "CCROBOT-ONLINE MEEB_3DP"
+#define DEFAULT_MACHINE_NAME "STM32F103RCT6"
+#define BOARD_WEBSITE_URL "ccrobot-online.com"
+
+//
+// Release PB4 from JTAG NRST role
+//
+#define DISABLE_JTAG
+
+//
+// EEPROM
+//
+#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
+  #define FLASH_EEPROM_EMULATION
+  #define EEPROM_PAGE_SIZE                0x800U  // 2KB
+  #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
+  #define MARLIN_EEPROM_SIZE              0x1000  // 4KB
+#endif
+
+//
+// Servos
+//
+#define SERVO0_PIN                          PA1
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                          PC0
+#define Y_STOP_PIN                          PC1
+#define Z_STOP_PIN                          PC2
+
+//
+// Z Probe must be this pin
+//
+#define Z_MIN_PROBE_PIN                     PC15  // "PROBE"
+
+//
+// TMC2208 stepper drivers
+//
+#define X_ENABLE_PIN                        PB4
+#define X_STEP_PIN                          PC12
+#define X_DIR_PIN                           PC11
+
+#define Y_ENABLE_PIN                        PC10
+#define Y_STEP_PIN                          PB14
+#define Y_DIR_PIN                           PB13
+
+#define Z_ENABLE_PIN                        PB12
+#define Z_STEP_PIN                          PB2
+#define Z_DIR_PIN                           PB1
+
+#define E0_ENABLE_PIN                       PB0
+#define E0_STEP_PIN                         PA6
+#define E0_DIR_PIN                          PA5
+
+// Stepper drivers Serial UART
+#define X_SERIAL_TX_PIN                     PB3
+#define X_SERIAL_RX_PIN                     PD2
+#define Y_SERIAL_TX_PIN                     PA15
+#define Y_SERIAL_RX_PIN                     PC6
+#define Z_SERIAL_TX_PIN                     PB11
+#define Z_SERIAL_RX_PIN                     PB10
+#define E0_SERIAL_TX_PIN                    PC5
+#define E0_SERIAL_RX_PIN                    PC4
+
+// Reduce baud rate to improve software serial reliability
+#define TMC_BAUD_RATE                      19200
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                          PA0   // TH0
+#define TEMP_BED_PIN                        PC3   // THB
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PC8   // HEATER0
+#define HEATER_BED_PIN                      PC9   // HOT BED
+
+#define FAN_PIN                             PA7   // FAN  (fan2 on board) model cool fan
+#define FAN1_PIN                            PA8   // FAN  (fan0 on board) e0 cool fan
+#define FAN2_PIN                            PB9   // FAN  (fan1 on board) controller cool fan
+
+// One NeoPixel onboard and a connector for other NeoPixels
+#define NEOPIXEL_PIN                        PC7   // The NEOPIXEL LED driving pin
+
+/**
+ *     1 _____ 2
+ *  PB5 | · · | PB6
+ *  PA2 | · · | RESET
+ *  PA3 | · · | PB8
+ *  PB7 | · · | PA4
+ *  GND | · · | VCC5
+ *     9 ----- 10
+ *      LCD EXP
+ */
+
+//
+// LCD / Controller
+//
+#if ENABLED(CR10_STOCKDISPLAY)
+  #define BEEPER_PIN                        PB5
+  #define BTN_EN1                           PA2
+  #define BTN_EN2                           PA3
+  #define BTN_ENC                           PB6
+
+  #define LCD_PINS_RS                       PB7   // CS -- SOFT SPI for ENDER3 LCD
+  #define LCD_PINS_D4                       PB8   // SCLK
+  #define LCD_PINS_ENABLE                   PA4   // DATA MOSI
+#endif
+
+// Alter timing for graphical display
+#if HAS_MARLINUI_U8GLIB
+  #ifndef BOARD_ST7920_DELAY_1
+    #define BOARD_ST7920_DELAY_1 DELAY_NS(125)
+  #endif
+  #ifndef BOARD_ST7920_DELAY_2
+    #define BOARD_ST7920_DELAY_2 DELAY_NS(125)
+  #endif
+  #ifndef BOARD_ST7920_DELAY_3
+    #define BOARD_ST7920_DELAY_3 DELAY_NS(125)
+  #endif
+#endif
+
+//
+// Camera
+//
+#define CHDK_PIN                            PB15
+
+#if 0
+
+//
+// SD-NAND
+//
+#if SD_CONNECTION_IS(ONBOARD)
+  #define SD_DETECT_PIN                     -1
+  #define SD_SCK_PIN                        PA5
+  #define SD_MISO_PIN                       PA6
+  #define SD_MOSI_PIN                       PA7
+  #define SD_SS_PIN                         PA4
+#endif
+
+#define ONBOARD_SPI_DEVICE                     1  // SPI1
+#define ONBOARD_SD_CS_PIN                   PA4   // Chip select for SD-NAND
+
+#endif