diff options
| author | Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> | 2021-03-04 20:54:23 +0300 |
|---|---|---|
| committer | Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> | 2021-03-04 20:54:23 +0300 |
| commit | e8701195e66f2d27ffe17fb514eae8173795aaf7 (patch) | |
| tree | 9f519c4abf6556b9ae7190a6210d87ead1dfadde /Marlin/src/pins/stm32f1 | |
| download | kp3s-lgvl-e8701195e66f2d27ffe17fb514eae8173795aaf7.tar.xz kp3s-lgvl-e8701195e66f2d27ffe17fb514eae8173795aaf7.zip | |
Initial commit
Diffstat (limited to 'Marlin/src/pins/stm32f1')
52 files changed, 8583 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_BEAST.h b/Marlin/src/pins/stm32f1/pins_BEAST.h new file mode 100644 index 0000000..bf2cf64 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BEAST.h @@ -0,0 +1,159 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 21017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "Beast STM32" +#define DEFAULT_MACHINE_NAME "STM32F103RET6" + +// Enable I2C_EEPROM for testing +#define I2C_EEPROM + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Steppers +// +#define X_STEP_PIN PE0 +#define X_DIR_PIN PE1 +#define X_ENABLE_PIN PC0 +#define X_MIN_PIN PD5 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 +#define Y_ENABLE_PIN PC1 +#define Y_MIN_PIN PD6 +#define Y_MAX_PIN + +#define Z_STEP_PIN PE4 +#define Z_DIR_PIN PE5 +#define Z_ENABLE_PIN PC2 +#define Z_MIN_PIN PD7 +#define Z_MAX_PIN -1 + +#define Y2_STEP_PIN -1 +#define Y2_DIR_PIN -1 +#define Y2_ENABLE_PIN -1 + +#define Z2_STEP_PIN -1 +#define Z2_DIR_PIN -1 +#define Z2_ENABLE_PIN -1 + +#define E0_STEP_PIN PE6 +#define E0_DIR_PIN PE7 +#define E0_ENABLE_PIN PC3 + +/** + * TODO: Currently using same Enable pin to all steppers. + */ + +#define E1_STEP_PIN PE8 +#define E1_DIR_PIN PE9 +#define E1_ENABLE_PIN PC4 + +#define E2_STEP_PIN PE10 +#define E2_DIR_PIN PE11 +#define E2_ENABLE_PIN PC5 + +// +// Misc. Functions +// +#define SDSS PA15 +#define LED_PIN PB2 + +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PD12 // EXTRUDER 1 +#define HEATER_1_PIN PD13 +#define HEATER_2_PIN PD14 + +#define HEATER_BED_PIN PB9 // BED +#define HEATER_BED2_PIN -1 // BED2 +#define HEATER_BED3_PIN -1 // BED3 + +#ifndef FAN_PIN + #define FAN_PIN PB10 +#endif + +#define FAN_SOFT_PWM + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_1_PIN PA2 // Analog Input +#define TEMP_2_PIN PA3 // Analog Input + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #else + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 + #if !IS_NEWPANEL + #error "Non-NEWPANEL LCD is not supported." + #endif + #endif + + #if IS_NEWPANEL + #if IS_RRD_SC + #error "RRD Smart Controller is not supported." + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #elif ENABLED(LCD_I2C_PANELOLU2) + #error "LCD_I2C_PANELOLU2 is not supported." + #elif ENABLED(LCD_I2C_VIKI) + #error "LCD_I2C_VIKI is not supported." + #elif ANY(VIKI2, miniVIKI) + #error "VIKI2 / miniVIKI is not supported." + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported." + #elif ENABLED(MINIPANEL) + #error "MINIPANEL is not supported." + #else + #error "Other generic NEWPANEL LCD is not supported." + #endif + #endif // IS_NEWPANEL + +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h new file mode 100644 index 0000000..73a18fa --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h @@ -0,0 +1,183 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * BigTreeTech SKR CR-6 (STM32F103RET6) board pin assignments + */ + +#define DEFAULT_MACHINE_NAME "Creality3D" +#define BOARD_INFO_NAME "BTT SKR CR-6" + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +// +// Release PB4 (Z_STEP_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +// +// USB connect control +// +#define USB_CONNECT_PIN PA14 +#define USB_CONNECT_INVERTING false + +// +// EEPROM +// + +#if NO_EEPROM_SELECTED + #define I2C_EEPROM +#endif + +/* I2C */ +#if ENABLED(I2C_EEPROM) + #define IIC_EEPROM_SDA PB7 + #define IIC_EEPROM_SCL PB6 + + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#elif ENABLED(SDCARD_EEPROM_EMULATION) + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +#define E2END (MARLIN_EEPROM_SIZE - 1) // 2KB + +// +// Limit Switches +// + +#define X_STOP_PIN PC0 +#define Y_STOP_PIN PC1 +#define Z_STOP_PIN PC14 // Endtop or Probe + +#define FIL_RUNOUT_PIN PC15 + +// +// Probe +// +#define PROBE_TARE_PIN PA1 +#define PROBE_ACTIVATION_SWITCH_PIN PC2 // Optoswitch to Enable Z Probe + +// +// Steppers +// +#define X_ENABLE_PIN PB14 +#define X_STEP_PIN PB13 +#define X_DIR_PIN PB12 + +#define Y_ENABLE_PIN PB11 +#define Y_STEP_PIN PB10 +#define Y_DIR_PIN PB2 + +#define Z_ENABLE_PIN PB1 +#define Z_STEP_PIN PB0 +#define Z_DIR_PIN PC5 + +#define E0_ENABLE_PIN PD2 +#define E0_STEP_PIN PB3 +#define E0_DIR_PIN PB4 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA0 // TH1 +#define TEMP_BED_PIN PC3 // TB1 + +// +// Heaters / Fans +// + +#define HEATER_0_PIN PC8 // HEATER1 +#define HEATER_BED_PIN PC9 // HOT BED + +#define FAN_PIN PC6 // FAN +#define FAN_SOFT_PWM + +#define CONTROLLER_FAN_PIN PC7 + +// +// LCD / Controller +// +#if ENABLED(CR10_STOCKDISPLAY) + #define BTN_ENC PA15 + #define BTN_EN1 PA9 + #define BTN_EN2 PA10 + + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PB15 + #define LCD_PINS_D4 PB9 + + #define BEEPER_PIN PB5 +#endif + +#if HAS_TMC_UART + /** + * TMC2209 stepper drivers + * Hardware serial communication ports. + */ + #define X_HARDWARE_SERIAL MSerial4 + #define Y_HARDWARE_SERIAL MSerial4 + #define Z_HARDWARE_SERIAL MSerial4 + #define E0_HARDWARE_SERIAL MSerial4 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 1 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 2 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif +#endif + +// +// SD Card +// + +#define HAS_ONBOARD_SD + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN PC4 + + #define ON_BOARD_SPI_DEVICE 1 // SPI1 + #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card +#endif + +// +// Misc. Functions +// +#define LED_CONTROL_PIN PA13 + +#ifndef NEOPIXEL_PIN + #define NEOPIXEL_PIN PA8 +#endif diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h new file mode 100644 index 0000000..0426e80 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h @@ -0,0 +1,289 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(TARGET_STM32F1) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "BTT SKR E3 DIP V1.x" + +// Release PB3/PB4 (TMC_SW Pins) from JTAG pins +#define DISABLE_JTAG + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +// +// Servos +// +#define SERVO0_PIN PA1 // SERVOS + +// +// Limit Switches +// +#define X_STOP_PIN PC1 // X-STOP +#define Y_STOP_PIN PC0 // Y-STOP +#define Z_STOP_PIN PC15 // Z-STOP + +// +// Z Probe must be this pin +// +#define Z_MIN_PROBE_PIN PC14 // PROBE + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PC2 // E0-STOP +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PC7 +#define X_STEP_PIN PC6 +#define X_DIR_PIN PB15 +#ifndef X_CS_PIN + #define X_CS_PIN PC10 +#endif + +#define Y_ENABLE_PIN PB14 +#define Y_STEP_PIN PB13 +#define Y_DIR_PIN PB12 +#ifndef Y_CS_PIN + #define Y_CS_PIN PC11 +#endif + +#define Z_ENABLE_PIN PB11 +#define Z_STEP_PIN PB10 +#define Z_DIR_PIN PB2 +#ifndef Z_CS_PIN + #define Z_CS_PIN PC12 +#endif + +#define E0_ENABLE_PIN PB1 +#define E0_STEP_PIN PB0 +#define E0_DIR_PIN PC5 +#ifndef E0_CS_PIN + #define E0_CS_PIN PD2 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PB5 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB4 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB3 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL MSerial1 + //#define Y_HARDWARE_SERIAL MSerial1 + //#define Z_HARDWARE_SERIAL MSerial1 + //#define E0_HARDWARE_SERIAL MSerial1 + + // + // Software serial + // + #define X_SERIAL_TX_PIN PC10 + #define X_SERIAL_RX_PIN PC10 + + #define Y_SERIAL_TX_PIN PC11 + #define Y_SERIAL_RX_PIN PC11 + + #define Z_SERIAL_TX_PIN PC12 + #define Z_SERIAL_RX_PIN PC12 + + #define E0_SERIAL_TX_PIN PD2 + #define E0_SERIAL_RX_PIN PD2 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA0 // Analog Input "TH0" +#define TEMP_BED_PIN PC3 // Analog Input "TB0" + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC8 // "HE" +#define HEATER_BED_PIN PC9 // "HB" +#define FAN_PIN PA8 // "FAN0" + +// +// USB connect control +// +#define USB_CONNECT_PIN PC13 +#define USB_CONNECT_INVERTING false + +/** + * _____ + * 5V | 1 2 | GND + * (LCD_EN) PB7 | 3 4 | PB8 (LCD_RS) + * (LCD_D4) PB9 | 5 6 PA10 (BTN_EN2) + * RESET | 7 8 | PA9 (BTN_EN1) + * (BTN_ENC) PB6 | 9 10| PA15 (BEEPER) + * ----- + * EXP1 + */ + +#if HAS_WIRED_LCD + + #if ENABLED(CR10_STOCKDISPLAY) + + #define BEEPER_PIN PA15 + + #define BTN_ENC PB6 + #define BTN_EN1 PA9 + #define BTN_EN2 PA10 + + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PB7 + #define LCD_PINS_D4 PB9 + + #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! + + #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." + + #define LCD_PINS_RS PB9 + #define LCD_PINS_ENABLE PB6 + #define LCD_PINS_D4 PB8 + #define LCD_PINS_D5 PA10 + #define LCD_PINS_D6 PA9 + #define LCD_PINS_D7 PA15 + #define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD! + + #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) + + /** Creality Ender-2 display pinout + * _____ + * 5V | 1 2 | GND + * (MOSI) PB7 | 3 4 | PB8 (LCD_RS) + * (LCD_A0) PB9 | 5 6 PA10 (BTN_EN2) + * RESET | 7 8 | PA9 (BTN_EN1) + * (BTN_ENC) PB6 | 9 10| PA15 (SCK) + * ----- + * EXP1 + */ + + #define BTN_ENC PB6 + #define BTN_EN1 PA9 + #define BTN_EN2 PA10 + + #define DOGLCD_CS PB8 + #define DOGLCD_A0 PB9 + #define DOGLCD_SCK PA15 + #define DOGLCD_MOSI PB7 + #define FORCE_SOFT_SPI + #define LCD_BACKLIGHT_PIN -1 + + #else + #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, and MKS_LCD12864 are currently supported on the BIGTREE_SKR_E3_DIP." + #endif + +#endif // HAS_WIRED_LCD + +#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) + + #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_E3_DIP.h' for details. Comment out this line to continue." + + /** FYSETC TFT TFT81050 display pinout + * + * Board Display + * _____ _____ + * 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK) + * (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10) + * (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI) + * RESET | 7 8 | PA9 (MOD_RESET) (PA15) SD_DET | 7 8 | RESET + * (BEEPER) PB6 | 9 10| PA15 (SD_DET) GND | 9 10| 5V + * ----- ----- + * EXP1 EXP1 + * + * Needs custom cable: + * + * Board Adapter Display + * _________ + * EXP1-1 ----------- EXP1-10 + * EXP1-2 ----------- EXP1-9 + * SPI1-4 ----------- EXP1-6 + * EXP1-4 ----------- EXP1-5 + * SP11-3 ----------- EXP1-2 + * EXP1-6 ----------- EXP1-4 + * EXP1-7 ----------- EXP1-8 + * EXP1-8 ----------- EXP1-3 + * SPI1-1 ----------- EXP1-1 + * EXP1-10 ----------- EXP1-7 + */ + + #define CLCD_SPI_BUS 1 // SPI1 connector + + #define BEEPER_PIN PB6 + + #define CLCD_MOD_RESET PA9 + #define CLCD_SPI_CS PB8 + +#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 + +// +// SD Support +// + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN PC4 +#elif SD_CONNECTION_IS(LCD) && BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) + #define SD_DETECT_PIN PA15 + #define SD_SS_PIN PA10 +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP." +#endif + +#define ONBOARD_SPI_DEVICE 1 // SPI1 +#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h new file mode 100644 index 0000000..a09da02 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h @@ -0,0 +1,51 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#include "pins_BTT_SKR_MINI_E3_common.h" + +#define BOARD_INFO_NAME "BTT SKR Mini E3 V1.0" + +/** + * TMC220x stepper drivers + * Hardware serial communication ports. + */ +#if HAS_TMC_UART + #define X_HARDWARE_SERIAL MSerial4 + #define Y_HARDWARE_SERIAL MSerial4 + #define Z_HARDWARE_SERIAL MSerial4 + #define E0_HARDWARE_SERIAL MSerial4 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 2 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 1 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif +#endif diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h new file mode 100644 index 0000000..4951d69 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h @@ -0,0 +1,53 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#include "pins_BTT_SKR_MINI_E3_common.h" + +#define BOARD_INFO_NAME "BTT SKR Mini E3 V1.2" + +#ifndef NEOPIXEL_PIN + #define NEOPIXEL_PIN PC7 // LED driving pin +#endif + +/** + * TMC2208/TMC2209 stepper drivers + */ +#if HAS_TMC_UART + // + // Software serial + // + #define X_SERIAL_TX_PIN PB15 + #define X_SERIAL_RX_PIN PB15 + + #define Y_SERIAL_TX_PIN PC6 + #define Y_SERIAL_RX_PIN PC6 + + #define Z_SERIAL_TX_PIN PC10 + #define Z_SERIAL_RX_PIN PC10 + + #define E0_SERIAL_TX_PIN PC11 + #define E0_SERIAL_RX_PIN PC11 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h new file mode 100644 index 0000000..af2821f --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h @@ -0,0 +1,79 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#define SKR_MINI_E3_V2 + +// Onboard I2C EEPROM +#if NO_EEPROM_SELECTED + #define I2C_EEPROM + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB + #undef NO_EEPROM_SELECTED +#endif + +#include "pins_BTT_SKR_MINI_E3_common.h" + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "BTT SKR Mini E3 V2.0" +#endif + +// Release PA13/PA14 (led, usb control) from SWD pins +#define DISABLE_DEBUG + +#ifndef NEOPIXEL_PIN + #define NEOPIXEL_PIN PA8 // LED driving pin +#endif + +#ifndef PS_ON_PIN + #define PS_ON_PIN PC13 // Power Supply Control +#endif + +#define FAN1_PIN PC7 + +#ifndef CONTROLLER_FAN_PIN + #define CONTROLLER_FAN_PIN FAN1_PIN +#endif + +#if HAS_TMC_UART + /** + * TMC220x stepper drivers + * Hardware serial communication ports + */ + #define X_HARDWARE_SERIAL MSerial4 + #define Y_HARDWARE_SERIAL MSerial4 + #define Z_HARDWARE_SERIAL MSerial4 + #define E0_HARDWARE_SERIAL MSerial4 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 2 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 1 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif +#endif diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h new file mode 100644 index 0000000..bab662d --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h @@ -0,0 +1,283 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(TARGET_STM32F1) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +// Release PB3/PB4 (E0 STP/DIR) from JTAG pins +#define DISABLE_JTAG + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +// +// Servos +// +#define SERVO0_PIN PA1 // SERVOS + +// +// Limit Switches +// +#define X_STOP_PIN PC0 // X-STOP +#define Y_STOP_PIN PC1 // Y-STOP +#define Z_STOP_PIN PC2 // Z-STOP + +// +// Z Probe must be this pin +// +#define Z_MIN_PROBE_PIN PC14 // PROBE + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PC15 // E0-STOP +#endif + +// +// Power-loss Detection +// +#ifndef POWER_LOSS_PIN + #define POWER_LOSS_PIN PC12 // Power Loss Detection: PWR-DET +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PB14 +#define X_STEP_PIN PB13 +#define X_DIR_PIN PB12 + +#define Y_ENABLE_PIN PB11 +#define Y_STEP_PIN PB10 +#define Y_DIR_PIN PB2 + +#define Z_ENABLE_PIN PB1 +#define Z_STEP_PIN PB0 +#define Z_DIR_PIN PC5 + +#define E0_ENABLE_PIN PD2 +#define E0_STEP_PIN PB3 +#define E0_DIR_PIN PB4 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA0 // Analog Input "TH0" +#define TEMP_BED_PIN PC3 // Analog Input "TB0" + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC8 // "HE" +#define HEATER_BED_PIN PC9 // "HB" + +#ifdef SKR_MINI_E3_V2 + #define FAN_PIN PC6 +#else + #define FAN_PIN PA8 // "FAN0" +#endif + +// +// USB connect control +// +#ifdef SKR_MINI_E3_V2 + #define USB_CONNECT_PIN PA14 +#else + #define USB_CONNECT_PIN PC13 +#endif + +#define USB_CONNECT_INVERTING false + +/** + * SKR Mini E3 V1.0, V1.2 SKR Mini E3 V2.0 + * _____ _____ + * 5V | 1 2 | GND 5V | 1 2 | GND + * (LCD_EN) PB7 | 3 4 | PB8 (LCD_RS) (LCD_EN) PB15 | 3 4 | PB8 (LCD_RS) + * (LCD_D4) PB9 | 5 6 PA10 (BTN_EN2) (LCD_D4) PB9 | 5 6 PA10 (BTN_EN2) + * RESET | 7 8 | PA9 (BTN_EN1) RESET | 7 8 | PA9 (BTN_EN1) + * (BTN_ENC) PB6 | 9 10| PB5 (BEEPER) (BTN_ENC) PA15 | 9 10| PB5 (BEEPER) + * ----- ----- + * EXP1 EXP1 + */ +#ifdef SKR_MINI_E3_V2 + #define EXP1_9 PA15 + #define EXP1_3 PB15 +#else + #define EXP1_9 PB6 + #define EXP1_3 PB7 +#endif + +#if HAS_WIRED_LCD + + #if ENABLED(CR10_STOCKDISPLAY) + + #define BEEPER_PIN PB5 + #define BTN_ENC EXP1_9 + + #define BTN_EN1 PA9 + #define BTN_EN2 PA10 + + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE EXP1_3 + #define LCD_PINS_D4 PB9 + + #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! + + #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." + + #define LCD_PINS_RS PB9 + #define LCD_PINS_ENABLE EXP1_9 + #define LCD_PINS_D4 PB8 + #define LCD_PINS_D5 PA10 + #define LCD_PINS_D6 PA9 + #define LCD_PINS_D7 PB5 + #define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD! + + #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) + + #define BTN_ENC EXP1_9 + #define BTN_EN1 PA9 + #define BTN_EN2 PA10 + + #define DOGLCD_CS PB8 + #define DOGLCD_A0 PB9 + #define DOGLCD_SCK PB5 + #define DOGLCD_MOSI EXP1_3 + + #define FORCE_SOFT_SPI + #define LCD_BACKLIGHT_PIN -1 + + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + + #error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." + + /** + * TFTGLCD_PANEL_SPI display pinout + * + * Board Display + * _____ _____ + * 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK) + * (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) LCD_CS | 3 4 | SD_CS (PA10) + * (FREE) PB9 | 5 6 | PA10 (SD_CS) (FREE) | 5 6 | MOSI (SPI1-MOSI) + * RESET | 7 8 | PA9 (MOD_RESET) (PB5) SD_DET | 7 8 | (FREE) + * (BEEPER) PB6 | 9 10| PB5 (SD_DET) GND | 9 10| 5V + * ----- ----- + * EXP1 EXP1 + * + * Needs custom cable: + * + * Board Adapter Display + * _________ + * EXP1-1 ----------- EXP1-10 + * EXP1-2 ----------- EXP1-9 + * SPI1-4 ----------- EXP1-6 + * EXP1-4 ----------- FREE + * SPI1-3 ----------- EXP1-2 + * EXP1-6 ----------- EXP1-4 + * EXP1-7 ----------- FREE + * EXP1-8 ----------- EXP1-3 + * SPI1-1 ----------- EXP1-1 + * EXP1-10 ----------- EXP1-7 + */ + + #define TFTGLCD_CS PA9 + + #endif + + #else + #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, and TFTGLCD_PANEL_(SPI|I2C) are currently supported on the BIGTREE_SKR_MINI_E3." + #endif + +#endif // HAS_WIRED_LCD + +#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) + + #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." + + /** FYSETC TFT TFT81050 display pinout + * + * Board Display + * _____ _____ + * 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK) + * (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10) + * (FREE) PB9 | 5 6 | PA10 (SD_CS) (PB8) LCD_CS | 5 6 | MOSI (SPI1-MOSI) + * RESET | 7 8 | PA9 (MOD_RESET) (PB5) SD_DET | 7 8 | RESET + * (BEEPER) PB6 | 9 10| PB5 (SD_DET) GND | 9 10| 5V + * ----- ----- + * EXP1 EXP1 + * + * Needs custom cable: + * + * Board Adapter Display + * _________ + * EXP1-1 ----------- EXP1-10 + * EXP1-2 ----------- EXP1-9 + * SPI1-4 ----------- EXP1-6 + * EXP1-4 ----------- EXP1-5 + * SPI1-3 ----------- EXP1-2 + * EXP1-6 ----------- EXP1-4 + * EXP1-7 ----------- EXP1-8 + * EXP1-8 ----------- EXP1-3 + * SPI1-1 ----------- EXP1-1 + * EXP1-10 ----------- EXP1-7 + */ + + #define CLCD_SPI_BUS 1 // SPI1 connector + + #define BEEPER_PIN EXP1_9 + + #define CLCD_MOD_RESET PA9 + #define CLCD_SPI_CS PB8 + +#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 + +// +// SD Support +// + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN PC4 +#elif SD_CONNECTION_IS(LCD) && (BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) || IS_TFTGLCD_PANEL) + #define SD_DETECT_PIN PB5 + #define SD_SS_PIN PA10 +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "SD CUSTOM_CABLE is not compatible with SKR Mini E3." +#endif + +#define ONBOARD_SPI_DEVICE 1 // SPI1 +#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_MZ_V1_0.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_MZ_V1_0.h new file mode 100644 index 0000000..96420cf --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_MZ_V1_0.h @@ -0,0 +1,26 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#define BOARD_INFO_NAME "BTT SKR Mini MZ V1.0" + +#include "pins_BTT_SKR_MINI_E3_V2_0.h" diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h new file mode 100644 index 0000000..8668e1d --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h @@ -0,0 +1,232 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(TARGET_STM32F1) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "BTT SKR Mini V1.1" + +//#define DISABLE_DEBUG +#define DISABLE_JTAG + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +// +// Limit Switches +// +#define X_MIN_PIN PC2 +#define X_MAX_PIN PA2 +#define Y_MIN_PIN PC1 +#define Y_MAX_PIN PA1 +#define Z_MIN_PIN PC0 +#define Z_MAX_PIN PC3 + +// +// Steppers +// + +#define X_STEP_PIN PC6 +#define X_DIR_PIN PC7 +#define X_ENABLE_PIN PB15 + +#define Y_STEP_PIN PB13 +#define Y_DIR_PIN PB14 +#define Y_ENABLE_PIN PB12 + +#define Z_STEP_PIN PB10 +#define Z_DIR_PIN PB11 +#define Z_ENABLE_PIN PB2 + +#define E0_STEP_PIN PC5 +#define E0_DIR_PIN PB0 +#define E0_ENABLE_PIN PC4 + +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB3 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB4 + #endif + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PB5 + #endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA8 +#define FAN_PIN PC8 +#define HEATER_BED_PIN PC9 + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PB1 // Analog Input +#define TEMP_0_PIN PA0 // Analog Input + +// +// LCD Pins +// + +/** + * _____ _____ + * NC | · · | GND 5V | · · | GND + * RESET | · · | PB9 (SD_DETECT) (LCD_D7) PC14 | · · | PC15 (LCD_D6) + * (MOSI) PB5 | · · | PB8 (BTN_EN2) (LCD_D5) PB7 | · · | PC13 (LCD_D4) + * (SD_SS) PA15 | · · | PD2 (BTN_EN1) (LCD_RS) PC12 | · · | PB6 (LCD_EN) + * (SCK) PB3 | · · | PB4 (MISO) (BTN_ENC) PC11 | · · | PC10 (BEEPER) + * ----- ----- + * EXP2 EXP1 + */ + +#if HAS_WIRED_LCD + #define BEEPER_PIN PC10 + #define BTN_ENC PC11 + + #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS PC15 + + #define BTN_EN1 PB6 + #define BTN_EN2 PC13 + + #define LCD_PINS_ENABLE PC14 + #define LCD_PINS_D4 PB7 + + #elif IS_TFTGLCD_PANEL + + #undef BEEPER_PIN + #undef BTN_ENC + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS PD2 + #endif + + #define SD_DETECT_PIN PB9 + + #else + + #define LCD_PINS_RS PC12 + + #define BTN_EN1 PD2 + #define BTN_EN2 PB8 + + #define LCD_PINS_ENABLE PB6 + + #if ENABLED(FYSETC_MINI_12864) + + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN PC13 + #define DOGLCD_A0 PC12 + #define DOGLCD_CS PB6 + #define DOGLCD_SCK PB3 + #define DOGLCD_MOSI PB5 + + #define FORCE_SOFT_SPI // SPI MODE3 + + #define LED_PIN PB7 // red pwm + //#define LED_PIN PC15 // green + //#define LED_PIN PC14 // blue + + //#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + // #ifndef RGB_LED_R_PIN + // #define RGB_LED_R_PIN PB7 + // #endif + // #ifndef RGB_LED_G_PIN + // #define RGB_LED_G_PIN PC15 + // #endif + // #ifndef RGB_LED_B_PIN + // #define RGB_LED_B_PIN PC14 + // #endif + //#elif ENABLED(FYSETC_MINI_12864_2_1) + // #define NEOPIXEL_PIN PB7 + //#endif + + #else // !FYSETC_MINI_12864 + + #define LCD_PINS_D4 PC13 + #if IS_ULTIPANEL + #define LCD_PINS_D5 PB7 + #define LCD_PINS_D6 PC15 + #define LCD_PINS_D7 PC14 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #endif // !FYSETC_MINI_12864 + + #if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + #endif + #endif + + #endif + +#endif // HAS_WIRED_LCD + +// +// SD Card +// + +// By default the onboard SD is enabled. +// Change SDCARD_CONNECTION from 'ONBOARD' to 'LCD' for an external (LCD module) SD +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(LCD) + #define SPI_DEVICE 3 + #define SD_DETECT_PIN PB9 + #define SD_SCK_PIN PB3 + #define SD_MISO_PIN PB4 + #define SD_MOSI_PIN PB5 + #define SD_SS_PIN PA15 +#elif SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN PA3 + #define SD_SCK_PIN PA5 + #define SD_MISO_PIN PA6 + #define SD_MOSI_PIN PA7 + #define SD_SS_PIN PA4 +#endif +#define ONBOARD_SPI_DEVICE 1 // SPI1 +#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card diff --git a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h new file mode 100644 index 0000000..43dfdec --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h @@ -0,0 +1,178 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(TARGET_STM32F1) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "CCROBOT-ONLINE MEEB_3DP only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +// https://github.com/ccrobot-online/MEEB_3DP +// Pin assignments for 32-bit MEEB_3DP +#define BOARD_INFO_NAME "CCROBOT-ONLINE MEEB_3DP" +#define DEFAULT_MACHINE_NAME "STM32F103RCT6" +#define BOARD_WEBSITE_URL "ccrobot-online.com" + +// +// Release PB4 from JTAG NRST role +// +#define DISABLE_JTAG + +// +// EEPROM +// +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE 0x800U // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +// +// Servos +// +#define SERVO0_PIN PA1 + +// +// Limit Switches +// +#define X_STOP_PIN PC0 +#define Y_STOP_PIN PC1 +#define Z_STOP_PIN PC2 + +// +// Z Probe must be this pin +// +#define Z_MIN_PROBE_PIN PC15 // "PROBE" + +// +// TMC2208 stepper drivers +// +#define X_ENABLE_PIN PB4 +#define X_STEP_PIN PC12 +#define X_DIR_PIN PC11 + +#define Y_ENABLE_PIN PC10 +#define Y_STEP_PIN PB14 +#define Y_DIR_PIN PB13 + +#define Z_ENABLE_PIN PB12 +#define Z_STEP_PIN PB2 +#define Z_DIR_PIN PB1 + +#define E0_ENABLE_PIN PB0 +#define E0_STEP_PIN PA6 +#define E0_DIR_PIN PA5 + +// Stepper drivers Serial UART +#define X_SERIAL_TX_PIN PB3 +#define X_SERIAL_RX_PIN PD2 +#define Y_SERIAL_TX_PIN PA15 +#define Y_SERIAL_RX_PIN PC6 +#define Z_SERIAL_TX_PIN PB11 +#define Z_SERIAL_RX_PIN PB10 +#define E0_SERIAL_TX_PIN PC5 +#define E0_SERIAL_RX_PIN PC4 + +// Reduce baud rate to improve software serial reliability +#define TMC_BAUD_RATE 19200 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA0 // TH0 +#define TEMP_BED_PIN PC3 // THB + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC8 // HEATER0 +#define HEATER_BED_PIN PC9 // HOT BED + +#define FAN_PIN PA7 // FAN (fan2 on board) model cool fan +#define FAN1_PIN PA8 // FAN (fan0 on board) e0 cool fan +#define FAN2_PIN PB9 // FAN (fan1 on board) controller cool fan + +// One NeoPixel onboard and a connector for other NeoPixels +#define NEOPIXEL_PIN PC7 // The NEOPIXEL LED driving pin + +/** + * 1 _____ 2 + * PB5 | · · | PB6 + * PA2 | · · | RESET + * PA3 | · · | PB8 + * PB7 | · · | PA4 + * GND | · · | VCC5 + * 9 ----- 10 + * LCD EXP + */ + +// +// LCD / Controller +// +#if ENABLED(CR10_STOCKDISPLAY) + #define BEEPER_PIN PB5 + #define BTN_EN1 PA2 + #define BTN_EN2 PA3 + #define BTN_ENC PB6 + + #define LCD_PINS_RS PB7 // CS -- SOFT SPI for ENDER3 LCD + #define LCD_PINS_D4 PB8 // SCLK + #define LCD_PINS_ENABLE PA4 // DATA MOSI +#endif + +// Alter timing for graphical display +#if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + #endif +#endif + +// +// Camera +// +#define CHDK_PIN PB15 + +#if 0 + +// +// SD-NAND +// +#if SD_CONNECTION_IS(ONBOARD) + #define SD_DETECT_PIN -1 + #define SD_SCK_PIN PA5 + #define SD_MISO_PIN PA6 + #define SD_MOSI_PIN PA7 + #define SD_SS_PIN PA4 +#endif + +#define ONBOARD_SPI_DEVICE 1 // SPI1 +#define ONBOARD_SD_CS_PIN PA4 // Chip select for SD-NAND + +#endif diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h new file mode 100644 index 0000000..bb6f571 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -0,0 +1,290 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 2017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "Chitu3D" +#define DEFAULT_MACHINE_NAME "STM32F103RET6" + +#define BOARD_NO_NATIVE_USB + +// Enable I2C_EEPROM for testing +//#define I2C_EEPROM + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Steppers +// +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 +#define X_ENABLE_PIN PC13 +#define X_MIN_PIN PG10 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 +#define Y_ENABLE_PIN PE4 +#define Y_MIN_PIN PA12 +#define Y_MAX_PIN + +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 +#define Z_ENABLE_PIN PE1 +#define Z_MIN_PIN PA14 +#define Z_MAX_PIN -1 + +#define Y2_STEP_PIN -1 +#define Y2_DIR_PIN -1 +#define Y2_ENABLE_PIN -1 + +#define Z2_STEP_PIN -1 +#define Z2_DIR_PIN -1 +#define Z2_ENABLE_PIN -1 + +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 +#define E0_ENABLE_PIN PB8 + +#define E1_STEP_PIN -1 +#define E1_DIR_PIN -1 +#define E1_ENABLE_PIN -1 + +#define E2_STEP_PIN -1 +#define E2_DIR_PIN -1 +#define E2_ENABLE_PIN -1 + +// +// Misc. Functions +// +#define SDSS -1 +#define LED_PIN -1 + +#ifndef CASE_LIGHT_PIN + #define CASE_LIGHT_PIN PA8 // 8 +#endif + +#define PS_ON_PIN -1 +#define KILL_PIN PD6 // LED strip 24v + +// +// Heaters / Fans +// +#define HEATER_0_PIN PD12 // HOT-END +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 + +#define HEATER_BED_PIN PG11 // HOT-BED +#define HEATER_BED2_PIN -1 // BED2 +#define HEATER_BED3_PIN -1 // BED3 + +#ifndef FAN_PIN + #define FAN_PIN PG14 // MAIN BOARD FAN +#endif + +#define FAN_SOFT_PWM + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_1_PIN -1 // Analog Input +#define TEMP_2_PIN -1 // Analog Input + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI) + #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock + #elif BOTH(IS_NEWPANEL, PANEL_ONE) + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 + #else + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 + #if !IS_NEWPANEL + #define BEEPER_PIN PC1 // 33 + // Buttons attached to a shift register + // Not wired yet + //#define SHIFT_CLK_PIN PC6 // 38 + //#define SHIFT_LD_PIN PC10 // 42 + //#define SHIFT_OUT_PIN PC8 // 40 + //#define SHIFT_EN_PIN PA1 // 17 + #endif + #endif + + #if IS_NEWPANEL + + #if IS_RRD_SC + + #define BEEPER_PIN PC5 + + #define BTN_EN1 PB15 // 31 + #define BTN_EN2 PC1 // 33 + #define BTN_ENC PC3 // 35 + + #define SD_DETECT_PIN PD1 // 49 + #define KILL_PIN PC9 // 41 + + #if ENABLED(BQ_LCD_SMART_CONTROLLER) + #define LCD_BACKLIGHT_PIN PC7 // 39 + #endif + + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define BTN_EN1 PE0 // 64 + #define BTN_EN2 PD11 // 59 + #define BTN_ENC PD15 // 63 + #define SD_DETECT_PIN PC10 // 42 + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #define BTN_EN1 PC15 // 47 + #define BTN_EN2 PC11 // 43 + #define BTN_ENC PC0 // 32 + #define LCD_SDSS PD5 // 53 + #define SD_DETECT_PIN -1 + #define KILL_PIN PC9 // 41 + + #elif ENABLED(LCD_I2C_VIKI) + + #define BTN_EN1 PB6 // 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 PA7 // 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + + #define BTN_ENC -1 + #define LCD_SDSS PD5 // 53 + #define SD_DETECT_PIN PD1 // 49 + + #elif ANY(VIKI2, miniVIKI) + + #define BEEPER_PIN PC1 // 33 + + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 PC12 // 44 + #define DOGLCD_CS PC13 // 45 + #define LCD_SCREEN_ROT_180 + + #define BTN_EN1 PB6 // 22 + #define BTN_EN2 PA7 // 7 + #define BTN_ENC PC7 // 39 + + #define SDSS PD5 // 53 + #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board + + #define KILL_PIN PB15 // 31 + + #define STAT_LED_RED_PIN PC0 // 32 + #define STAT_LED_BLUE_PIN PC3 // 35 + + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #define BTN_EN1 PC3 // 35 + #define BTN_EN2 PC5 // 37 + #define BTN_ENC PB15 // 31 + #define SD_DETECT_PIN PD1 // 49 + #define LCD_SDSS PD5 // 53 + #define KILL_PIN PC9 // 41 + #define BEEPER_PIN PB7 // 23 + #define DOGLCD_CS PB13 // 29 + #define DOGLCD_A0 PB11 // 27 + #define LCD_BACKLIGHT_PIN PC1 // 33 + + #elif ENABLED(MINIPANEL) + + #define BEEPER_PIN PC10 // 42 + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 PC12 // 44 + #define DOGLCD_CS PE2 // 66 + #define LCD_BACKLIGHT_PIN PE1 // 65 // backlight LED on A11/D65 + #define SDSS PD5 // 53 + + #define KILL_PIN PE0 // 64 + // GLCD features + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + // The encoder and click button + #define BTN_EN1 PC8 // 40 + #define BTN_EN2 PD15 // 63 + #define BTN_ENC PD11 // 59 + // not connected to a pin + #define SD_DETECT_PIN PD1 // 49 + + #else + + // Beeper on AUX-4 + #define BEEPER_PIN PC1 // 33 + + // Buttons directly attached to AUX-2 + #if IS_RRW_KEYPAD + #define BTN_EN1 PE0 // 64 + #define BTN_EN2 PD11 // 59 + #define BTN_ENC PD15 // 63 + #define SHIFT_OUT_PIN PC8 // 40 + #define SHIFT_CLK_PIN PC12 // 44 + #define SHIFT_LD_PIN PC10 // 42 + #elif ENABLED(PANEL_ONE) + #define BTN_EN1 PD11 // 59 // AUX2 PIN 3 + #define BTN_EN2 PD15 // 63 // AUX2 PIN 4 + #define BTN_ENC PD1 // 49 // AUX3 PIN 7 + #else + #define BTN_EN1 PC5 // 37 + #define BTN_EN2 PC3 // 35 + #define BTN_ENC PB15 // 31 + #endif + + #if ENABLED(G3D_PANEL) + #define SD_DETECT_PIN PD1 // 49 + #define KILL_PIN PC9 // 41 + #else + //#define SD_DETECT_PIN -1 // Ramps doesn't use this + #endif + + #endif + #endif // IS_NEWPANEL + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h new file mode 100644 index 0000000..c90ae84 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h @@ -0,0 +1,189 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 2017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "Chitu3D V5" +#define DEFAULT_MACHINE_NAME "STM32F103ZET6" + +#define BOARD_NO_NATIVE_USB + +#define DISABLE_JTAG + +// +// EEPROM +// +#define FLASH_EEPROM_EMULATION +#if ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE +#else + #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PG10 +#define Y_STOP_PIN PA12 +#define Z_STOP_PIN PA14 + +// +// Steppers +// +#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 + +#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 + +#define Z_ENABLE_PIN PE1 +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 + +#define E0_ENABLE_PIN PB8 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 + +#define E1_ENABLE_PIN PG8 +#define E1_STEP_PIN PC7 +#define E1_DIR_PIN PC6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA1 // TH1 +#define TEMP_BED_PIN PA0 // TB1 + +// +// Heaters +// +#define HEATER_0_PIN PG12 // HEATER1 +#define HEATER_BED_PIN PG11 // HOT BED + +// +// Fans +// +#define CONTROLLER_FAN_PIN PD6 // BOARD FAN +#define FAN_PIN PG13 // FAN +#define FAN2_PIN PG14 + +// +// Misc +// +#define BEEPER_PIN PB0 +//#define LED_PIN -1 +//#define POWER_LOSS_PIN -1 +#define FIL_RUNOUT_PIN PA15 + +// SPI Flash +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x200000 // 2MB +#endif + +// SPI 2 +#define W25QXX_CS_PIN PB12 +#define W25QXX_MOSI_PIN PB15 +#define W25QXX_MISO_PIN PB14 +#define W25QXX_SCK_PIN PB13 + +// +// TronXY TFT Support +// + +#if HAS_FSMC_TFT + + // Shared FSMC + + #define TOUCH_CS_PIN PB7 // SPI1_NSS + #define TOUCH_SCK_PIN PA5 // SPI1_SCK + #define TOUCH_MISO_PIN PA6 // SPI1_MISO + #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + + #define TFT_RESET_PIN PF11 + #define TFT_BACKLIGHT_PIN PD13 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PD11 + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + +#endif + +#if ENABLED(TFT_LVGL_UI) + // LVGL + #define HAS_SPI_FLASH_FONT 1 + #define HAS_GCODE_PREVIEW 1 + #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 + #define HAS_LANG_SELECT_SCREEN 1 + #define HAS_BAK_VIEW_IN_FLASH 0 + #define HAS_LOGO_IN_FLASH 0 +#elif ENABLED(TFT_COLOR_UI) + // Color UI + #define TFT_DRIVER ILI9488 + #define TFT_BUFFER_SIZE 14400 +#endif + +// XPT2046 Touch Screen calibration +#if ANY(TFT_LVGL_UI, TFT_COLOR_UI, TFT_CLASSIC_UI) + #ifndef TOUCH_CALIBRATION_X + #define TOUCH_CALIBRATION_X -17181 + #endif + #ifndef TOUCH_CALIBRATION_Y + #define TOUCH_CALIBRATION_Y 11434 + #endif + #ifndef TOUCH_OFFSET_X + #define TOUCH_OFFSET_X 501 + #endif + #ifndef TOUCH_OFFSET_Y + #define TOUCH_OFFSET_Y -9 + #endif +#endif + +// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available +// Needs to use SPI2 +#define SPI_DEVICE 2 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN PB14 +#define SD_MOSI_PIN PB15 +#define SD_SS_PIN PB12 + +// +// SD Card +// +#define SDIO_SUPPORT +#define SD_DETECT_PIN -1 // PF0, but it isn't connected +#define SDIO_CLOCK 4500000 +#define SDIO_READ_RETRIES 16 diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h new file mode 100644 index 0000000..96cf366 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h @@ -0,0 +1,204 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 2017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "Chitu3D" +#define DEFAULT_MACHINE_NAME "STM32F103ZET6" + +#define BOARD_NO_NATIVE_USB + +#define DISABLE_JTAG + +// +// EEPROM +// + +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION +#endif + +#if ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE +#else + #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PG10 +#define Y_STOP_PIN PA12 +#define Z_STOP_PIN PG9 + +// +// Steppers +// +#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 + +#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 + +#define Z_ENABLE_PIN PE1 +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 + +#define Z2_ENABLE_PIN PF3 +#define Z2_STEP_PIN PF5 +#define Z2_DIR_PIN PF1 + +#define E0_ENABLE_PIN PB8 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 + +#define E1_ENABLE_PIN PG8 +#define E1_STEP_PIN PC7 +#define E1_DIR_PIN PC6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA1 // TH1 +#define TEMP_BED_PIN PA0 // TB1 + +// +// Heaters +// +#define HEATER_0_PIN PG12 // HEATER1 +#define HEATER_BED_PIN PG11 // HOT BED +//#define HEATER_BED_INVERTING true + +// +// Fans +// +#define CONTROLLER_FAN_PIN PD6 // BOARD FAN +#define FAN_PIN PG13 // FAN +#define FAN2_PIN PG14 + +// +// Misc +// +#define BEEPER_PIN PB0 +//#define LED_PIN PD3 +//#define POWER_LOSS_PIN PG2 // PG4 PW_DET + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PA15 // MT_DET +#endif +#ifndef FIL_RUNOUT2_PIN + #define FIL_RUNOUT2_PIN PF13 +#endif + +// SPI Flash +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x200000 // 2MB +#endif + +// SPI 2 +#define W25QXX_CS_PIN PB12 +#define W25QXX_MOSI_PIN PB15 +#define W25QXX_MISO_PIN PB14 +#define W25QXX_SCK_PIN PB13 + +// +// TronXY TFT Support +// + +#if HAS_FSMC_TFT + + // Shared FSMC + + #define TOUCH_CS_PIN PB7 // SPI1_NSS + #define TOUCH_SCK_PIN PA5 // SPI1_SCK + #define TOUCH_MISO_PIN PA6 // SPI1_MISO + #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + + #define TFT_RESET_PIN PF11 + #define TFT_BACKLIGHT_PIN PD13 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PD11 + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + +#endif + +#if ENABLED(TFT_LVGL_UI) + // LVGL + #define HAS_SPI_FLASH_FONT 1 + #define HAS_GCODE_PREVIEW 1 + #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 + #define HAS_LANG_SELECT_SCREEN 1 + #define HAS_BAK_VIEW_IN_FLASH 0 + #define HAS_LOGO_IN_FLASH 0 +#elif ENABLED(TFT_COLOR_UI) + // Color UI + #define TFT_DRIVER ILI9488 + #define TFT_BUFFER_SIZE 14400 +#endif + +// XPT2046 Touch Screen calibration +#if ANY(TFT_LVGL_UI, TFT_COLOR_UI, TFT_CLASSIC_UI) + #ifndef TOUCH_CALIBRATION_X + #define TOUCH_CALIBRATION_X -17181 + #endif + #ifndef TOUCH_CALIBRATION_Y + #define TOUCH_CALIBRATION_Y 11434 + #endif + #ifndef TOUCH_OFFSET_X + #define TOUCH_OFFSET_X 501 + #endif + #ifndef TOUCH_OFFSET_Y + #define TOUCH_OFFSET_Y -9 + #endif +#endif + +// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available +// so SPI2 is required. +#define SPI_DEVICE 2 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN PB14 +#define SD_MOSI_PIN PB15 +#define SD_SS_PIN PB12 + +// +// SD Card +// +#define SDIO_SUPPORT +#define SD_DETECT_PIN -1 // PF0, but it isn't connected +#define SDIO_CLOCK 4500000 +#define SDIO_READ_RETRIES 16 diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h new file mode 100644 index 0000000..8b5b856 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h @@ -0,0 +1,200 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +/** + * Creality 4.2.x (STM32F103RET6) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "Creality V4 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Creality V4" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME "Ender 3 V2" +#endif + +#define BOARD_NO_NATIVE_USB + +// +// EEPROM +// +#if NO_EEPROM_SELECTED + #define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 + //#define SDCARD_EEPROM_EMULATION +#endif + +#if ENABLED(IIC_BL24CXX_EEPROM) + #define IIC_EEPROM_SDA PA11 + #define IIC_EEPROM_SCL PA12 + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16) +#elif ENABLED(SDCARD_EEPROM_EMULATION) + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb +#endif + +// +// Servos +// +#ifndef HAS_PIN_27_BOARD + #define SERVO0_PIN PB0 // BLTouch OUT +#else + #define SERVO0_PIN PC6 +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PA5 +#define Y_STOP_PIN PA6 +#define Z_STOP_PIN PA7 + +#define Z_MIN_PROBE_PIN PB1 // BLTouch IN + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PA4 // "Pulled-high" +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PC3 +#ifndef X_STEP_PIN + #define X_STEP_PIN PC2 +#endif +#ifndef X_DIR_PIN + #define X_DIR_PIN PB9 +#endif + +#define Y_ENABLE_PIN PC3 +#ifndef Y_STEP_PIN + #define Y_STEP_PIN PB8 +#endif +#ifndef Y_DIR_PIN + #define Y_DIR_PIN PB7 +#endif + +#define Z_ENABLE_PIN PC3 +#ifndef Z_STEP_PIN + #define Z_STEP_PIN PB6 +#endif +#ifndef Z_DIR_PIN + #define Z_DIR_PIN PB5 +#endif + +#define E0_ENABLE_PIN PC3 +#ifndef E0_STEP_PIN + #define E0_STEP_PIN PB4 +#endif +#ifndef E0_DIR_PIN + #define E0_DIR_PIN PB3 +#endif + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC5 // TH1 +#define TEMP_BED_PIN PC4 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA1 // HEATER1 +#define HEATER_BED_PIN PA2 // HOT BED + +#define FAN_PIN PA0 // FAN +#define FAN_SOFT_PWM + +// +// SD Card +// +#define SD_DETECT_PIN PC7 +#define SDCARD_CONNECTION ONBOARD +#define ONBOARD_SPI_DEVICE 1 +#define ONBOARD_SD_CS_PIN PA4 // SDSS +#define SDIO_SUPPORT +#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer + +#if ENABLED(CR10_STOCKDISPLAY) && NONE(RET6_12864_LCD, VET6_12864_LCD) + #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller." +#endif + +#if ENABLED(RET6_12864_LCD) + + // RET6 12864 LCD + #define LCD_PINS_RS PB12 + #define LCD_PINS_ENABLE PB15 + #define LCD_PINS_D4 PB13 + + #define BTN_ENC PB2 + #define BTN_EN1 PB10 + #define BTN_EN2 PB14 + + #ifndef HAS_PIN_27_BOARD + #define BEEPER_PIN PC6 + #endif + +#elif ENABLED(VET6_12864_LCD) + + // VET6 12864 LCD + #define LCD_PINS_RS PA4 + #define LCD_PINS_ENABLE PA7 + #define LCD_PINS_D4 PA5 + + #define BTN_ENC PC5 + #define BTN_EN1 PB10 + #define BTN_EN2 PA6 + +#elif ENABLED(DWIN_CREALITY_LCD) + + // RET6 DWIN ENCODER LCD + #define BTN_ENC PB14 + #define BTN_EN1 PB15 + #define BTN_EN2 PB12 + + //#define LCD_LED_PIN PB2 + #ifndef BEEPER_PIN + #define BEEPER_PIN PB13 + #undef SPEAKER + #endif + +#elif ENABLED(DWIN_VET6_CREALITY_LCD) + + // VET6 DWIN ENCODER LCD + #define BTN_ENC PA6 + #define BTN_EN1 PA7 + #define BTN_EN2 PA4 + + #define BEEPER_PIN PA5 + +#endif diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h new file mode 100644 index 0000000..025e68d --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h @@ -0,0 +1,208 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +/** + * CREALITY 4.2.10 (STM32F103) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "CREALITY supports up to 1 hotends / E-steppers. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Creality V4.2.10" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME "3DPrintMill" +#endif + +#define BOARD_NO_NATIVE_USB + +// +// EEPROM +// +#if NO_EEPROM_SELECTED + // FLASH + //#define FLASH_EEPROM_EMULATION + + // I2C + #define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 used only for display settings + #if ENABLED(IIC_BL24CXX_EEPROM) + #define IIC_EEPROM_SDA PA11 + #define IIC_EEPROM_SCL PA12 + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16) + #else + #define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb + #endif + + // SPI + //#define SPI_EEPROM // EEPROM on SPI-0 + //#define SPI_CHAN_EEPROM1 ? + //#define SPI_EEPROM1_CS ? + + // 2K EEPROM + //#define SPI_EEPROM2_CS ? + + // 32Mb FLASH + //#define SPI_FLASH_CS ? +#endif + +// +// Servos +// +#define SERVO0_PIN PB0 // BLTouch OUT + +// +// Limit Switches +// +#define X_STOP_PIN PA3 +#define Y_STOP_PIN PA7 +#define Z_STOP_PIN PA5 + +#define Z_MIN_PROBE_PIN PA5 // BLTouch IN + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PA6 // "Pulled-high" +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PC3 +#ifndef X_STEP_PIN + #define X_STEP_PIN PC2 +#endif +#ifndef X_DIR_PIN + #define X_DIR_PIN PB9 +#endif + +#define Y_ENABLE_PIN PC3 +#ifndef Y_STEP_PIN + #define Y_STEP_PIN PB8 +#endif +#ifndef Y_DIR_PIN + #define Y_DIR_PIN PB7 +#endif + +#define Z_ENABLE_PIN PC3 +#ifndef Z_STEP_PIN + #define Z_STEP_PIN PB6 +#endif +#ifndef Z_DIR_PIN + #define Z_DIR_PIN PB5 +#endif + +#define E0_ENABLE_PIN PC3 +#ifndef E0_STEP_PIN + #define E0_STEP_PIN PB4 +#endif +#ifndef E0_DIR_PIN + #define E0_DIR_PIN PB3 +#endif + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC5 // TH1 +#define TEMP_BED_PIN PC4 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA0 // HEATER1 +#define HEATER_BED_PIN PA1 // HOT BED + +#define FAN_PIN PA2 // FAN +#define FAN_SOFT_PWM + +// +// SD Card +// +#define SD_DETECT_PIN PC7 +#define SDCARD_CONNECTION ONBOARD +#define ONBOARD_SPI_DEVICE 1 +#define ONBOARD_SD_CS_PIN PA4 // SDSS +#define SDIO_SUPPORT +#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer + +#if ENABLED(CR10_STOCKDISPLAY) && NONE(RET6_12864_LCD, VET6_12864_LCD) + #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller." +#endif + +#if ENABLED(RET6_12864_LCD) + + // RET6 12864 LCD + #define LCD_PINS_RS PB12 + #define LCD_PINS_ENABLE PB15 + #define LCD_PINS_D4 PB13 + + #define BTN_ENC PB2 + #define BTN_EN1 PB10 + #define BTN_EN2 PB14 + + #define BEEPER_PIN PC6 + +#elif ENABLED(VET6_12864_LCD) + + // VET6 12864 LCD + #define LCD_PINS_RS PA4 + #define LCD_PINS_ENABLE PA7 + #define LCD_PINS_D4 PA5 + + #define BTN_ENC PC5 + #define BTN_EN1 PB10 + #define BTN_EN2 PA6 + +#elif ENABLED(DWIN_CREALITY_LCD) + + // RET6 DWIN ENCODER LCD + #define BTN_ENC PB14 + #define BTN_EN1 PB15 + #define BTN_EN2 PB12 + + //#define LCD_LED_PIN PB2 + #ifndef BEEPER_PIN + #define BEEPER_PIN PB13 + #undef SPEAKER + #endif + +#elif ENABLED(DWIN_VET6_CREALITY_LCD) + + // VET6 DWIN ENCODER LCD + #define BTN_ENC PA6 + #define BTN_EN1 PA7 + #define BTN_EN2 PA4 + + #define BEEPER_PIN PA5 + +#endif diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V427.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V427.h new file mode 100644 index 0000000..64ef046 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V427.h @@ -0,0 +1,44 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +/** + * CREALITY v4.2.7 (STM32F103) board pin assignments + */ + +#define BOARD_INFO_NAME "Creality v4.2.7" +#define DEFAULT_MACHINE_NAME "Creality3D" + +// +// Steppers +// +#define X_STEP_PIN PB9 +#define X_DIR_PIN PC2 +#define Y_STEP_PIN PB7 + +#define Y_DIR_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB6 + +#define E0_STEP_PIN PB3 +#define E0_DIR_PIN PB4 + +#include "pins_CREALITY_V4.h" diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V431.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V431.h new file mode 100644 index 0000000..ff9f760 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V431.h @@ -0,0 +1,39 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +/** + * CREALITY v4.3.1 (STM32F103) board pin assignments + */ + +#define BOARD_INFO_NAME "Creality v4.3.1" +#define DEFAULT_MACHINE_NAME "Creality3D" + +// +// Steppers +// +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB7 + +#define Y_STEP_PIN PC2 +#define Y_DIR_PIN PB9 + +#include "pins_CREALITY_V4.h" diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h new file mode 100644 index 0000000..9acbb42 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h @@ -0,0 +1,38 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +/** + * Creality v4.5.2 (STM32F103RET6) board pin assignments + */ + +#if HOTENDS > 1 || E_STEPPERS > 1 + #error "Creality v4.5.2 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_NAME "Creality v4.5.2" + +#define HEATER_0_PIN PA1 // HEATER1 +#define HEATER_BED_PIN PA2 // HOT BED +#define FAN_PIN PA0 // FAN +#define PROBE_ACTIVATION_SWITCH_PIN PC6 // Optoswitch to Enable Z Probe + +#include "pins_CREALITY_V45x.h" diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V453.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V453.h new file mode 100644 index 0000000..f990b2f --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V453.h @@ -0,0 +1,38 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +/** + * Creality v4.5.3 (STM32F103RET6) board pin assignments + */ + +#if HOTENDS > 1 || E_STEPPERS > 1 + #error "Creality v4.5.3 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_NAME "Creality v4.5.3" + +#define HEATER_0_PIN PB14 // HEATER1 +#define HEATER_BED_PIN PB13 // HOT BED +#define FAN_PIN PB15 // FAN +#define PROBE_ACTIVATION_SWITCH_PIN PB2 // Optoswitch to Enable Z Probe + +#include "pins_CREALITY_V45x.h" diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h new file mode 100644 index 0000000..f2be289 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h @@ -0,0 +1,113 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ + +/** + * Creality v4.5.2 and v4.5.3 (STM32F103RET6) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define DEFAULT_MACHINE_NAME "Creality3D" + +// +// Release PB4 (Z_STEP_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +#define BOARD_NO_NATIVE_USB + +// +// EEPROM +// +#if NO_EEPROM_SELECTED + #define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 + //#define SDCARD_EEPROM_EMULATION +#endif + +#if ENABLED(IIC_BL24CXX_EEPROM) + #define IIC_EEPROM_SDA PA11 + #define IIC_EEPROM_SCL PA12 + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16) +#elif ENABLED(SDCARD_EEPROM_EMULATION) + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PC4 +#define Y_STOP_PIN PC5 +#define Z_STOP_PIN PA4 + +#define FIL_RUNOUT_PIN PA7 + +// +// Probe +// +#define PROBE_TARE_PIN PA5 + +// +// Steppers +// +#define X_ENABLE_PIN PC3 +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB7 + +#define Y_ENABLE_PIN PC3 +#define Y_STEP_PIN PB6 +#define Y_DIR_PIN PB5 + +#define Z_ENABLE_PIN PC3 +#define Z_STEP_PIN PB4 +#define Z_DIR_PIN PB3 + +#define E0_ENABLE_PIN PC3 +#define E0_STEP_PIN PC2 +#define E0_DIR_PIN PB9 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PB1 // TH1 +#define TEMP_BED_PIN PB0 // TB1 + +// +// Heaters / Fans +// + +#define FAN_SOFT_PWM + +// +// SD Card +// +#define SD_DETECT_PIN PC7 +#define NO_SD_HOST_DRIVE // SD is only seen by the printer + +#define SDIO_SUPPORT // Extra added by Creality +#define SDIO_CLOCK 6000000 // In original source code overridden by Creality in sdio.h + +// +// Misc. Functions +// +#define CASE_LIGHT_PIN PA6 diff --git a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h new file mode 100644 index 0000000..c49c31e --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h @@ -0,0 +1,318 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * FLSUN HiSpeed V1 (STM32F103VET6) board pin assignments + * FLSun Hispeed (clone MKS_Robin_miniV2) board. + * + * MKS Robin Mini USB uses UART3 (PB10-TX, PB11-RX) + * #define SERIAL_PORT_2 3 + */ + +#if NOT_TARGET(__STM32F1__, STM32F1xx) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "FLSUN HiSpeedV1 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "FLSun HiSpeedV1" +#define BOARD_WEBSITE_URL "github.com/Foxies-CSTL" + +#define BOARD_NO_NATIVE_USB + +// Avoid conflict with TIMER_SERVO when using the STM32 HAL +#define TEMP_TIMER 5 + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +// +// EEPROM +// +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +// +// SPI +// Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface. +// +#define SD_SCK_PIN PB13 // SPI2 +#define SD_MISO_PIN PB14 // SPI2 +#define SD_MOSI_PIN PB15 // SPI2 +#define SPI_DEVICE 2 + +// SPI Flash +#define HAS_SPI_FLASH 1 +#define SPI_FLASH_SIZE 0x1000000 // 16MB + +#if HAS_SPI_FLASH + // SPI 2 + #define W25QXX_CS_PIN PB12 // SPI2_NSS / Flash chip-select + #define W25QXX_MOSI_PIN PB15 + #define W25QXX_MISO_PIN PB14 + #define W25QXX_SCK_PIN PB13 +#endif + +// +// Servos +// +//#define SERVO0_PIN PA8 // use IO0 to enable BLTOUCH support/remove Mks_Wifi + +// +// Limit Switches +// +#define X_STOP_PIN PA15 // -X +#define Y_STOP_PIN PA12 // -Y +#define Z_MIN_PIN PA11 // -Z +#define Z_MAX_PIN PC4 // +Z + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN MT_DET_1_PIN +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PE4 // X_EN +#define X_STEP_PIN PE3 // X_STEP +#define X_DIR_PIN PE2 // X_DIR + +#define Y_ENABLE_PIN PE1 // Y_EN +#define Y_STEP_PIN PE0 // Y_STEP +#define Y_DIR_PIN PB9 // Y_DIR + +#define Z_ENABLE_PIN PB8 // Z_EN +#define Z_STEP_PIN PB5 // Z_STEP +#define Z_DIR_PIN PB4 // Z_DIR + +#define E0_ENABLE_PIN PB3 // E0_EN +#define E0_STEP_PIN PD6 // E0_STEP +#define E0_DIR_PIN PD3 // E0_DIR + +/** + * FLSUN Hi-Speed has no hard-wired UART pins for TMC drivers. + * Several wiring options are provided below, defaulting to + * to the most compatible. + */ +#if HAS_TMC_UART + // SoftwareSerial with one pin per driver + // Compatible with TMC2208 and TMC2209 drivers + #define X_SERIAL_TX_PIN PA10 // RXD1 + #define X_SERIAL_RX_PIN PA10 // RXD1 + #define Y_SERIAL_TX_PIN PA9 // TXD1 + #define Y_SERIAL_RX_PIN PA9 // TXD1 + #define Z_SERIAL_TX_PIN PC7 // IO1 + #define Z_SERIAL_RX_PIN PC7 // IO1 + #define TMC_BAUD_RATE 19200 +#else + // Motor current PWM pins + #define MOTOR_CURRENT_PWM_XY_PIN PA6 // VREF2/3 CONTROL XY + #define MOTOR_CURRENT_PWM_Z_PIN PA7 // VREF4 CONTROL Z + #define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp + #ifndef DEFAULT_PWM_MOTOR_CURRENT + #define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 } + #endif + + /** + * MKS Robin_Wifi or another ESP8266 module + * + * __ESP(M1)__ -J1- + * GND| 15 | | 08 |+3v3 (22) RXD1 (PA10) + * | 16 | | 07 |MOSI (21) TXD1 (PA9) Active LOW, probably OK to leave floating + * IO2| 17 | | 06 |MISO (19) IO1 (PC7) Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating) + * IO0| 18 | | 05 |CLK (18) IO0 (PA8) Must be HIGH (ESP3D software configures this with a pullup so OK to leave as floating) + * IO1| 19 | | 03 |EN (03) WIFI_EN Must be HIGH for module to run + * | nc | | nc | (01) WIFI_CTRL (PA5) + * RX| 21 | | nc | + * TX| 22 | | 01 |RST + * ￣￣ AE￣￣ + */ + // Module ESP-WIFI + #define ESP_WIFI_MODULE_COM 2 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this + #define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2 + #define ESP_WIFI_MODULE_RESET_PIN PA5 // WIFI CTRL/RST + #define ESP_WIFI_MODULE_ENABLE_PIN -1 + #define ESP_WIFI_MODULE_TXD_PIN PA9 // MKS or ESP WIFI RX PIN + #define ESP_WIFI_MODULE_RXD_PIN PA10 // MKS or ESP WIFI TX PIN +#endif + +// +// EXTRUDER +// +#if AXIS_DRIVER_TYPE_E0(TMC2208) || AXIS_DRIVER_TYPE_E0(TMC2209) + #define E0_SERIAL_TX_PIN PA8 // IO0 + #define E0_SERIAL_RX_PIN PA8 // IO0 + #define TMC_BAUD_RATE 19200 +#else + // Motor current PWM pins + #define MOTOR_CURRENT_PWM_E_PIN PB0 // VREF1 CONTROL E + #define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp + #ifndef DEFAULT_PWM_MOTOR_CURRENT + #define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 } + #endif +#endif + +// +// Temperature Sensors (THM) +// +#define TEMP_0_PIN PC1 // TEMP_E0 +#define TEMP_BED_PIN PC0 // TEMP_BED + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC3 // HEATER_E0 +#define HEATER_BED_PIN PA0 // HEATER_BED-WKUP + +#define FAN_PIN PB1 // E_FAN + +// +// Misc. Functions +// +//#define POWER_LOSS_PIN PA1 // PW_SO +#if ENABLED(BACKUP_POWER_SUPPLY) + #define POWER_LOSS_PIN PA2 // PW_DET (UPS) MKSPWC +#endif + +/** + * Connector J2 + * ------- + * DIO O|1 2|O 3v3 + * CSK O|3 5|O GND + * RST O|5 6|O GND + * ------- + */ +//#define SW_DIO PA13 +//#define SW_CLK PA14 +//#define SW_RST NRST // (14) + +// +// Power Supply Control +// +#if ENABLED(PSU_CONTROL) + #define KILL_PIN PA2 // PW_DET + #define KILL_PIN_INVERTING true + //#define PS_ON_PIN PA3 // PW_CN /PW_OFF +#endif + +#define MT_DET_1_PIN PA4 // MT_DET +#define MT_DET_2_PIN PE6 // FALA_CRTL +#define MT_DET_PIN_INVERTING false + +// +// LED / NEOPixel +// +//#define LED_PIN PB2 // BOOT1 + +#if ENABLED(NEOPIXEL_LED) + #define LED_PWM PC7 // IO1 + #ifndef NEOPIXEL_PIN + #define NEOPIXEL_PIN LED_PWM // USED WIFI IO0/IO1 PIN + #endif +#endif + +// +// SD Card +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +// Use the on-board card socket labeled SD_Extender +#if SD_CONNECTION_IS(CUSTOM_CABLE) + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 + #define SD_SS_PIN -1 + #define SD_DETECT_PIN PD12 // SD_CD (if -1 no detection) +#else + #define SDIO_SUPPORT + #define SDIO_CLOCK 4500000 // 4.5 MHz + #define SDIO_READ_RETRIES 16 + #define ONBOARD_SPI_DEVICE 1 // SPI1 + #define ONBOARD_SD_CS_PIN PC11 + #define SD_DETECT_PIN -1 // SD_CD (-1 active refresh) +#endif + +// +// LCD / Controller +// +#ifndef BEEPER_PIN + #define BEEPER_PIN PC5 +#endif + +#if ENABLED(SPEAKER) && BEEPER_PIN == PC5 + #error "FLSun HiSpeed default BEEPER_PIN is not a SPEAKER." +#endif + +#if HAS_FSMC_TFT || HAS_GRAPHICAL_TFT + #define TFT_CS_PIN PD7 // NE4 + #define TFT_RS_PIN PD11 // A0 +#endif + +#if HAS_FSMC_TFT + /** + * Note: MKS Robin TFT screens use various TFT controllers + * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240) + * ILI9488 is not supported + * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp + * + * If the screen stays white, disable 'LCD_RESET_PIN' + * to let the bootloader init the screen. + * + * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu + * because Marlin uses the reset as a failsafe to revive a glitchy LCD. + */ + //#define TFT_RESET_PIN PC6 // FSMC_RST + #define TFT_BACKLIGHT_PIN PD13 + #define FSMC_CS_PIN TFT_CS_PIN // NE4 + #define FSMC_RS_PIN TFT_RS_PIN // A0 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + #ifdef TFT_CLASSIC_UI + #define TFT_MARLINBG_COLOR 0x3186 // Grey + #define TFT_MARLINUI_COLOR 0xC7B6 // Green + #define TFT_BTARROWS_COLOR 0xDEE6 // Yellow + #define TFT_BTOKMENU_COLOR 0x145F // Cyan + #endif + #define TFT_BUFFER_SIZE 14400 +#elif HAS_GRAPHICAL_TFT + #define TFT_RESET_PIN PC6 + #define TFT_BACKLIGHT_PIN PD13 +#endif + +#if NEED_TOUCH_PINS + #define TOUCH_CS_PIN PC2 // SPI2_NSS + #define TOUCH_SCK_PIN PB13 // SPI2_SCK + #define TOUCH_MISO_PIN PB14 // SPI2_MISO + #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI + #define TOUCH_INT_PIN -1 +#endif diff --git a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h new file mode 100644 index 0000000..2278d55 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h @@ -0,0 +1,176 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "FLY_MINI" +#define BOARD_WEBSITE_URL "github.com/FLYmaker" +#define DISABLE_JTAG + +// +// Flash EEPROM Emulation +// +#define FLASH_EEPROM_EMULATION +#define EEPROM_PAGE_SIZE 0x800 // 2KB +#define EEPROM_START_ADDRESS (0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE) // 256K firmware space +#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE + +// +// Servos +// +#define SERVO0_PIN PA8 + +// +// Limit Switches +// +#define X_MIN_PIN PC12 +#define X_MAX_PIN PC11 +#define Y_MIN_PIN PC10 +#define Y_MAX_PIN PA15 +#define Z_MIN_PIN PA14 +#define Z_MAX_PIN PA13 + +// +// Steppers +// +#define X_STEP_PIN PB1 +#define X_DIR_PIN PB2 +#define X_ENABLE_PIN PB10 +#ifndef X_CS_PIN + #define X_CS_PIN PB0 +#endif + +#define Y_STEP_PIN PA2 +#define Y_DIR_PIN PC4 +#define Y_ENABLE_PIN PC5 +#ifndef Y_CS_PIN + #define Y_CS_PIN PA7 +#endif + +#define Z_STEP_PIN PA3 +#define Z_DIR_PIN PA5 +#define Z_ENABLE_PIN PA6 +#ifndef Z_CS_PIN + #define Z_CS_PIN PA4 +#endif + +#define E0_STEP_PIN PA1 +#define E0_DIR_PIN PC3 +#define E0_ENABLE_PIN PA0 +#ifndef E0_CS_PIN + #define E0_CS_PIN PC2 +#endif + +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PB15 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB14 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB13 + #endif +#endif + +#if HAS_TMC_UART + // + // Software serial + // + #define X_SERIAL_TX_PIN PB0 + #define X_SERIAL_RX_PIN PB0 + #define Y_SERIAL_TX_PIN PA7 + #define Y_SERIAL_RX_PIN PA7 + #define Z_SERIAL_TX_PIN PA4 + #define Z_SERIAL_RX_PIN PA4 + #define E0_SERIAL_TX_PIN PC2 + #define E0_SERIAL_RX_PIN PC2 +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC6 +#define HEATER_BED_PIN PC7 +#ifndef FAN_PIN + #define FAN_PIN PC8 +#endif +#define FAN1_PIN PC9 + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PC0 // Analog Input +#define TEMP_0_PIN PC1 // Analog Input + +// +// LCD Pins +// + +// +// LCD / Controller +// +#define SPI_DEVICE 2 +#define SD_SS_PIN PB12 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN PB14 +#define SD_MOSI_PIN PB15 + +#define SDSS SD_SS_PIN +#define SD_DETECT_PIN PB11 + +#define BEEPER_PIN PC14 + +#define LCD_PINS_RS PB8 +#define LCD_PINS_ENABLE PB9 +#define LCD_PINS_D4 PB7 +#define LCD_PINS_D5 PB6 +#define LCD_PINS_D6 PB5 +#define LCD_PINS_D7 PB4 + +#define BTN_EN1 PD2 +#define BTN_EN2 PB3 +#define BTN_ENC PC13 + +#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder +#endif + +// +// Filament runout +// + +// +// ST7920 Delays +// +#ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(96) +#endif +#ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(48) +#endif +#ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(715) +#endif diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h new file mode 100644 index 0000000..3919723 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -0,0 +1,211 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "FYSETC AIO II" +#define BOARD_WEBSITE_URL "fysetc.com" + +#define BOARD_NO_NATIVE_USB + +#define DISABLE_JTAG + +#define pins_v2_20190128 // new pins define + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Flash EEPROM Emulation +// +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PA1 +#define Y_STOP_PIN PA0 +#define Z_STOP_PIN PB14 + +// +// Filament runout +// +#ifdef pins_v2_20190128 + #define FIL_RUNOUT_PIN PB15 +#else + #define FIL_RUNOUT_PIN PB5 +#endif + +// +// Steppers +// +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB9 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PB2 +#ifdef pins_v2_20190128 + #define Y_DIR_PIN PB3 +#else + #define Y_DIR_PIN PB0 +#endif +#define Y_ENABLE_PIN PB1 + +#define Z_STEP_PIN PC0 +#define Z_DIR_PIN PC1 +#define Z_ENABLE_PIN PC2 + +#define E0_STEP_PIN PC15 +#define E0_DIR_PIN PC14 +#define E0_ENABLE_PIN PC13 + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + */ + + // Hardware serial with switch + #define X_HARDWARE_SERIAL MSerial2 + #define Y_HARDWARE_SERIAL MSerial2 + #define Z_HARDWARE_SERIAL MSerial2 + #define E0_HARDWARE_SERIAL MSerial2 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 1 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 2 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif + + // The 4xTMC2209 module doesn't have a serial multiplexer and + // needs to set *_SLAVE_ADDRESS in Configuration_adv.h for X,Y,Z,E0 + #if HAS_DRIVER(TMC2208) + #define TMC_SERIAL_MULTIPLEXER + #define SERIAL_MUL_PIN1 PB13 + #define SERIAL_MUL_PIN2 PB12 + #endif + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +// +// Stepper current PWM +// +#ifndef MOTOR_CURRENT_PWM_RANGE + #define MOTOR_CURRENT_PWM_RANGE 1500 // origin:2000 +#endif +#define DEFAULT_PWM_MOTOR_CURRENT { 500, 500, 400 } // origin: {1300,1300,1250} + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC7 +#define HEATER_BED_PIN PC6 +#ifndef FAN_PIN + #define FAN_PIN PC8 +#endif + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PC5 // Analog Input +#define TEMP_0_PIN PC4 // Analog Input + +// +// Misc. Functions +// +#define SDSS PA4 + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #define BEEPER_PIN PC9 + + #if HAS_MARLINUI_U8GLIB + + #define DOGLCD_A0 PA15 + #ifdef pins_v2_20190128 + #define DOGLCD_CS PB5 + #else + #define DOGLCD_CS PB7 + #endif + + //#define LCD_CONTRAST_INIT 190 + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #endif + + // not connected to a pin + #define SD_DETECT_PIN PC3 + + #if IS_NEWPANEL + // The encoder and click button + #define BTN_EN1 PC10 + #define BTN_EN2 PC11 + #define BTN_ENC PC12 + #endif + + #ifdef pins_v2_20190128 + #define LCD_RESET_PIN PB4 + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN PB0 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN PB6 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN PB7 + #endif + #else + #define LCD_RESET_PIN PB6 + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN PB3 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN PB4 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN PB5 + #endif + #endif + +#endif diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h new file mode 100644 index 0000000..c978092 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -0,0 +1,194 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define DEFAULT_MACHINE_NAME "3D Printer" + +#define BOARD_INFO_NAME "FYSETC Cheetah" +#define BOARD_WEBSITE_URL "fysetc.com" + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +#define BOARD_NO_NATIVE_USB + +#define DISABLE_JTAG + +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +// +// Servos +// +#define SERVO0_PIN PA0 + +// +// Limit Switches +// +#define X_STOP_PIN PA1 +#define Y_STOP_PIN PB4 +#define Z_STOP_PIN PA15 + +// +// Filament runout +// +#define FIL_RUNOUT_PIN PB5 + +// +// Steppers +// +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB9 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PB2 +#define Y_DIR_PIN PB3 +#define Y_ENABLE_PIN PB1 + +#define Z_STEP_PIN PC0 +#define Z_DIR_PIN PC1 +#define Z_ENABLE_PIN PC2 + +#define E0_STEP_PIN PC15 +#define E0_DIR_PIN PC14 +#define E0_ENABLE_PIN PC13 + +#if HAS_TMC_UART + #define X_HARDWARE_SERIAL MSerial2 + #define Y_HARDWARE_SERIAL MSerial2 + #define Z_HARDWARE_SERIAL MSerial2 + #define E0_HARDWARE_SERIAL MSerial2 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 1 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 2 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC6 +#define HEATER_BED_PIN PC7 +#ifndef FAN_PIN + #define FAN_PIN PC8 +#endif + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PC5 // Analog Input +#define TEMP_0_PIN PC4 // Analog Input + +// +// Misc. Functions +// +#define SDSS PA4 +#define SD_DETECT_PIN PC3 + +#ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN PB0 +#endif +#ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN PB7 +#endif +#ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN PB6 +#endif + +/* +* EXP1 pinout for the LCD according to Fysetcs schematic for the Cheetah board +* _____ +* (Beeper) PC9 | 1 2 | PC12 (BTN_ENC) +* (BTN_EN2) PC11 | 3 4 | PB14 (LCD_RS / MISO) +* (BTN_EN1) PC10 5 6 | PB13 (SCK) +* (LCD_EN) PB12 | 7 8 | PB15 (MOSI) +* GND | 9 10| 5V +* ----- +* EXP1 +* Note: The pin-numbers match the connector correctly and are not in reverse order like on the Ender-3 board. +* Note: Functionally the pins are assigned in the same order as on the Ender-3 board. +* Note: Pin 4 on the Cheetah board is assigned to an I/O, it is assigned to RESET on the Ender-3 board. +*/ + +#if HAS_WIRED_LCD + #define BEEPER_PIN PC9 + + #if HAS_MARLINUI_U8GLIB + #define DOGLCD_A0 PB14 + #define DOGLCD_CS PB12 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #if EITHER(FYSETC_MINI_12864, U8GLIB_ST7920) + #define FORCE_SOFT_SPI + #endif + #endif + + #define LCD_PINS_RS PB12 // CS -- SOFT SPI for ENDER3 LCD + #define LCD_PINS_D4 PB13 // SCLK + #define LCD_PINS_ENABLE PB15 // DATA MOSI + + //#define LCD_CONTRAST_INIT 190 + + #if IS_NEWPANEL + #define BTN_EN1 PC10 + #define BTN_EN2 PC11 + #define BTN_ENC PC12 + #endif +#endif + +#if ENABLED(TOUCH_UI_FTDI_EVE) + #define BEEPER_PIN PC9 + #define CLCD_MOD_RESET PC11 + #define CLCD_SPI_CS PB12 + + //#define CLCD_USE_SOFT_SPI // the Cheetah can use hardware-SPI so we do not really need this + + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI PB15 + #define CLCD_SOFT_SPI_MISO PB14 + #define CLCD_SOFT_SPI_SCLK PB13 + #else + #define CLCD_SPI_BUS 2 + #endif +#endif diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h new file mode 100644 index 0000000..65b1675 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h @@ -0,0 +1,64 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#include "pins_FYSETC_CHEETAH.h" + +#undef X_HARDWARE_SERIAL +#undef Y_HARDWARE_SERIAL +#undef Z_HARDWARE_SERIAL +#undef E0_HARDWARE_SERIAL + +#undef RGB_LED_R_PIN +#undef RGB_LED_G_PIN +#undef RGB_LED_B_PIN + +#define FAN1_PIN PB0 // Fan1 + +#if HAS_TMC_UART + + /** + * TMC2208/TMC2209 stepper drivers + */ + + // + // Software serial + // + #define X_SERIAL_TX_PIN PA11 + #define X_SERIAL_RX_PIN PA12 + + #define Y_SERIAL_TX_PIN PB6 + #define Y_SERIAL_RX_PIN PB7 + + #define Z_SERIAL_TX_PIN PB10 + #define Z_SERIAL_RX_PIN PB11 + + #define E0_SERIAL_TX_PIN PA2 + #define E0_SERIAL_RX_PIN PA3 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h new file mode 100644 index 0000000..5b97e7f --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h @@ -0,0 +1,243 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * 24 May 2018 - @chepo for STM32F103VET6 + * Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "GTM32 Pro VB" +#define DEFAULT_MACHINE_NAME "STM32F103VET6" + +#define BOARD_NO_NATIVE_USB + +//#define DISABLE_DEBUG + +// +// It is required to disable JTAG function because its pins are +// used as GPIO to drive the Y axis stepper. +// DO NOT ENABLE! +// +#define DISABLE_JTAG + +// +// If you don't need the SWDIO functionality (any more), you may +// disable SWD here to regain PA13/PA14 pins for other use. +// +//#define DISABLE_JTAGSWD + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// Enable EEPROM Emulation for this board as it doesn't have EEPROM +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +// +// Limit Switches +// +#define X_MIN_PIN PE5 // ENDSTOPS 15,17 +#define X_MAX_PIN PE4 // ENDSTOPS 16,18 +#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 +#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 +#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 +#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 + +// +// Steppers +// +#define X_STEP_PIN PC6 +#define X_DIR_PIN PD13 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PA12 +#define Y_DIR_PIN PA11 +#define Y_ENABLE_PIN PA15 + +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PB3 + +// Extruder stepper pins +// NOTE: Numbering here is made according to EXT connector numbers, +// the FANx_PWM line numbering in the schematics is reverse. +// That is, E0_*_PIN are the E2_* lines connected to E2_A1 step +// stick that drives the EXT0 output on the board. +// +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 + +#define E1_STEP_PIN PA0 +#define E1_DIR_PIN PB6 +#define E1_ENABLE_PIN PA1 + +#define E2_STEP_PIN PB2 +#define E2_DIR_PIN PB11 +#define E2_ENABLE_PIN PC4 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PB0 // EXT0 port +#define HEATER_1_PIN PB5 // EXT1 port +#define HEATER_2_PIN PB4 // EXT2 port +#define HEATER_BED_PIN PB1 // CON2X3 hotbed port + +// +// These are FAN PWM pins on EXT0..EXT2 connectors. +// +//#define FAN_PIN PB9 // EXT0 port +#define FAN1_PIN PB8 // EXT1 port +#define FAN2_PIN PB7 // EXT2 port + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC2 // EXT0 port +#define TEMP_1_PIN PC1 // EXT1 port +#define TEMP_2_PIN PC0 // EXT2 port +#define TEMP_BED_PIN PC3 // CON2X3 hotbed port + +// +// Misc. Functions +// +#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + + #if IS_RRD_SC + // + // LCD display on J2 FFC40 + // Geeetech's LCD2004A Control Panel is very much like + // RepRapDiscount Smart Controller, but adds an FFC40 connector + // + #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PE14 // SID (MOSI) + #define LCD_PINS_D4 PD8 // SCK (CLK) clock + #define LCD_PINS_D5 PD9 + #define LCD_PINS_D6 PD10 + #define LCD_PINS_D7 PE15 + + #else + // + // Serial LCDs can be implemented in ExtUI + // + //#define LCD_UART_TX PD8 + //#define LCD_UART_RX PD9 + #endif + + #if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(715) + #endif + #endif + +#endif // HAS_WIRED_LCD + +#if IS_RRD_SC + // + // Geeetech's LCD2004A Control Panel is very much like + // RepRapDiscount Smart Controller, but adds an FFC40 connector + // connected with a flat wire to J2 connector on the board. + // + #define BTN_EN1 PE8 + #define BTN_EN2 PE9 + #define BTN_ENC PE13 + + #define GTM32_PRO_VB_USE_LCD_BEEPER + #define GTM32_PRO_VB_USE_EXT_SDCARD +#endif + +// +// Beeper +// +#ifdef GTM32_PRO_VB_USE_LCD_BEEPER + // This is pin 32 on J2 FFC40 and pin, goes to the beeper + // on Geeetech's version of RepRapDiscount Smart Controller + // (e.g. on Rostock 301) + #define BEEPER_PIN PE12 +#else + // This is the beeper on the board itself + #define BEEPER_PIN PB10 +#endif + +/** + * The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired. + * + * The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2) + * connector, which usually go to the SD Card slot on the Geeetech version of the + * RepRapDiscount Smart Controller. Both connectors have the card detect signal. + * + * The on-board SD card and the external card (on either SD_CARD or J2) are two + * separate devices and can work simultaneously. Unfortunately, Marlin only supports + * a single SPI Flash device (as of 2019-07-05) so only one is enabled here. + */ +#if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD) + // + // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector + // + #define SD_SS_PIN PC11 + #define SD_SCK_PIN PC12 + #define SD_MOSI_PIN PD2 + #define SD_MISO_PIN PC8 + #define SD_DETECT_PIN PC7 +#else + // + // Use the on-board card socket labeled TF_CARD_SOCKET + // + #define SD_SS_PIN PA4 + #define SD_SCK_PIN PA5 + #define SD_MOSI_PIN PA7 + #define SD_MISO_PIN PA6 + #define SD_DETECT_PIN -1 // Card detect is not connected +#endif + +#define SDSS SD_SS_PIN + +// +// ESP WiFi can be soldered to J9 connector which is wired to USART2. +// Must define WIFISUPPORT in Configuration.h for the printer. +// +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h new file mode 100644 index 0000000..173eb67 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h @@ -0,0 +1,237 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * 24 May 2018 - @chepo for STM32F103VET6 + * Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "GTM32 Pro VB" +#define DEFAULT_MACHINE_NAME "STM32F103VET6" + +#define BOARD_NO_NATIVE_USB + +//#define DISABLE_DEBUG + +// +// It is required to disable JTAG function because its pins are +// used as GPIO to drive the Y axis stepper. +// DO NOT ENABLE! +// +#define DISABLE_JTAG + +// +// If you don't need the SWDIO functionality (any more), you may +// disable SWD here to regain PA13/PA14 pins for other use. +// +//#define DISABLE_JTAGSWD + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// Enable EEPROM Emulation for this board as it doesn't have EEPROM +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +// +// Limit Switches +// +#define X_MIN_PIN PE5 // ENDSTOPS 15,17 +#define X_MAX_PIN PE4 // ENDSTOPS 16,18 +#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 +#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 +#define Z_MIN_PIN PE0 // ENDSTOPS 3,5 +#define Z_MAX_PIN PE1 // ENDSTOPS 4,6 + +// +// Steppers +// +#define X_STEP_PIN PC6 +#define X_DIR_PIN PD13 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PA12 +#define Y_DIR_PIN PA11 +#define Y_ENABLE_PIN PA15 + +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PB3 + +// Extruder stepper pins +// NOTE: Numbering here is made according to EXT connector numbers, +// the FANx_PWM line numbering in the schematics is reverse. +// That is, E0_*_PIN are the E2_* lines connected to E2_A1 step +// stick that drives the EXT0 output on the board. +// +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 + +#define E1_STEP_PIN PA0 +#define E1_DIR_PIN PB6 +#define E1_ENABLE_PIN PA1 + +#define E2_STEP_PIN PB2 +#define E2_DIR_PIN PB11 +#define E2_ENABLE_PIN PC4 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PB0 // EXT0 port +#define HEATER_1_PIN PB5 // EXT1 port +#define HEATER_2_PIN PB4 // EXT2 port +#define HEATER_BED_PIN PB1 // CON2X3 hotbed port + +// +// These are FAN PWM pins on EXT0..EXT2 connectors. +// +//#define FAN_PIN PB9 // EXT0 port +#define FAN1_PIN PB8 // EXT1 port +#define FAN2_PIN PB7 // EXT2 port + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC2 // EXT0 port +#define TEMP_1_PIN PC1 // EXT1 port +#define TEMP_2_PIN PC0 // EXT2 port +#define TEMP_BED_PIN PC3 // CON2X3 hotbed port + +// +// Misc. Functions +// +#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + + #if IS_RRD_SC + // + // LCD display on J2 FFC40 + // Geeetech's LCD2004A Control Panel is very much like + // RepRapDiscount Smart Controller, but adds an FFC40 connector + // connected with a flat wire to J2 connector on the board. + // + #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PE14 // SID (MOSI) + #define LCD_PINS_D4 PD8 // SCK (CLK) clock + #define LCD_PINS_D5 PD9 + #define LCD_PINS_D6 PD10 + #define LCD_PINS_D7 PE15 + + #define BTN_EN1 PE8 + #define BTN_EN2 PE9 + #define BTN_ENC PE13 + + #define GTM32_PRO_VB_USE_LCD_BEEPER + #define GTM32_PRO_VB_USE_EXT_SDCARD + + #else + // + // Serial LCDs can be implemented in ExtUI + // + //#define LCD_UART_TX PD8 + //#define LCD_UART_RX PD9 + #endif + + #if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(715) + #endif + #endif + +#endif // HAS_WIRED_LCD + +// +// Beeper +// +#ifdef GTM32_PRO_VB_USE_LCD_BEEPER + // This is pin 32 on J2 FFC40 and pin, goes to the beeper + // on Geeetech's version of RepRapDiscount Smart Controller + // (e.g. on Rostock 301) + #define BEEPER_PIN PE12 +#else + // This is the beeper on the board itself + #define BEEPER_PIN PB10 +#endif + +/** + * The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired. + * + * The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2) + * connector, which usually go to the SD Card slot on the Geeetech version of the + * RepRapDiscount Smart Controller. Both connectors have the card detect signal. + * + * The on-board SD card and the external card (on either SD_CARD or J2) are two + * separate devices and can work simultaneously. Unfortunately, Marlin only supports + * a single SPI Flash device (as of 2019-07-05) so only one is enabled here. + */ +#if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD) + // + // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector + // + #define SD_SS_PIN PC11 + #define SD_SCK_PIN PC12 + #define SD_MOSI_PIN PD2 + #define SD_MISO_PIN PC8 + #define SD_DETECT_PIN PC7 +#else + // + // Use the on-board card socket labeled TF_CARD_SOCKET + // + #define SD_SS_PIN PA4 + #define SD_SCK_PIN PA5 + #define SD_MOSI_PIN PA7 + #define SD_MISO_PIN PA6 + #define SD_DETECT_PIN -1 // Card detect is not connected +#endif + +#define SDSS SD_SS_PIN + +// +// ESP WiFi can be soldered to J9 connector which is wired to USART2. +// Must define WIFISUPPORT in Configuration.h for the printer. +// +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h new file mode 100644 index 0000000..5b97e7f --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h @@ -0,0 +1,243 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * 24 May 2018 - @chepo for STM32F103VET6 + * Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "GTM32 Pro VB" +#define DEFAULT_MACHINE_NAME "STM32F103VET6" + +#define BOARD_NO_NATIVE_USB + +//#define DISABLE_DEBUG + +// +// It is required to disable JTAG function because its pins are +// used as GPIO to drive the Y axis stepper. +// DO NOT ENABLE! +// +#define DISABLE_JTAG + +// +// If you don't need the SWDIO functionality (any more), you may +// disable SWD here to regain PA13/PA14 pins for other use. +// +//#define DISABLE_JTAGSWD + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// Enable EEPROM Emulation for this board as it doesn't have EEPROM +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +// +// Limit Switches +// +#define X_MIN_PIN PE5 // ENDSTOPS 15,17 +#define X_MAX_PIN PE4 // ENDSTOPS 16,18 +#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 +#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 +#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 +#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 + +// +// Steppers +// +#define X_STEP_PIN PC6 +#define X_DIR_PIN PD13 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PA12 +#define Y_DIR_PIN PA11 +#define Y_ENABLE_PIN PA15 + +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PB3 + +// Extruder stepper pins +// NOTE: Numbering here is made according to EXT connector numbers, +// the FANx_PWM line numbering in the schematics is reverse. +// That is, E0_*_PIN are the E2_* lines connected to E2_A1 step +// stick that drives the EXT0 output on the board. +// +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 + +#define E1_STEP_PIN PA0 +#define E1_DIR_PIN PB6 +#define E1_ENABLE_PIN PA1 + +#define E2_STEP_PIN PB2 +#define E2_DIR_PIN PB11 +#define E2_ENABLE_PIN PC4 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PB0 // EXT0 port +#define HEATER_1_PIN PB5 // EXT1 port +#define HEATER_2_PIN PB4 // EXT2 port +#define HEATER_BED_PIN PB1 // CON2X3 hotbed port + +// +// These are FAN PWM pins on EXT0..EXT2 connectors. +// +//#define FAN_PIN PB9 // EXT0 port +#define FAN1_PIN PB8 // EXT1 port +#define FAN2_PIN PB7 // EXT2 port + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC2 // EXT0 port +#define TEMP_1_PIN PC1 // EXT1 port +#define TEMP_2_PIN PC0 // EXT2 port +#define TEMP_BED_PIN PC3 // CON2X3 hotbed port + +// +// Misc. Functions +// +#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + + #if IS_RRD_SC + // + // LCD display on J2 FFC40 + // Geeetech's LCD2004A Control Panel is very much like + // RepRapDiscount Smart Controller, but adds an FFC40 connector + // + #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PE14 // SID (MOSI) + #define LCD_PINS_D4 PD8 // SCK (CLK) clock + #define LCD_PINS_D5 PD9 + #define LCD_PINS_D6 PD10 + #define LCD_PINS_D7 PE15 + + #else + // + // Serial LCDs can be implemented in ExtUI + // + //#define LCD_UART_TX PD8 + //#define LCD_UART_RX PD9 + #endif + + #if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(715) + #endif + #endif + +#endif // HAS_WIRED_LCD + +#if IS_RRD_SC + // + // Geeetech's LCD2004A Control Panel is very much like + // RepRapDiscount Smart Controller, but adds an FFC40 connector + // connected with a flat wire to J2 connector on the board. + // + #define BTN_EN1 PE8 + #define BTN_EN2 PE9 + #define BTN_ENC PE13 + + #define GTM32_PRO_VB_USE_LCD_BEEPER + #define GTM32_PRO_VB_USE_EXT_SDCARD +#endif + +// +// Beeper +// +#ifdef GTM32_PRO_VB_USE_LCD_BEEPER + // This is pin 32 on J2 FFC40 and pin, goes to the beeper + // on Geeetech's version of RepRapDiscount Smart Controller + // (e.g. on Rostock 301) + #define BEEPER_PIN PE12 +#else + // This is the beeper on the board itself + #define BEEPER_PIN PB10 +#endif + +/** + * The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired. + * + * The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2) + * connector, which usually go to the SD Card slot on the Geeetech version of the + * RepRapDiscount Smart Controller. Both connectors have the card detect signal. + * + * The on-board SD card and the external card (on either SD_CARD or J2) are two + * separate devices and can work simultaneously. Unfortunately, Marlin only supports + * a single SPI Flash device (as of 2019-07-05) so only one is enabled here. + */ +#if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD) + // + // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector + // + #define SD_SS_PIN PC11 + #define SD_SCK_PIN PC12 + #define SD_MOSI_PIN PD2 + #define SD_MISO_PIN PC8 + #define SD_DETECT_PIN PC7 +#else + // + // Use the on-board card socket labeled TF_CARD_SOCKET + // + #define SD_SS_PIN PA4 + #define SD_SCK_PIN PA5 + #define SD_MOSI_PIN PA7 + #define SD_MISO_PIN PA6 + #define SD_DETECT_PIN -1 // Card detect is not connected +#endif + +#define SDSS SD_SS_PIN + +// +// ESP WiFi can be soldered to J9 connector which is wired to USART2. +// Must define WIFISUPPORT in Configuration.h for the printer. +// +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h new file mode 100644 index 0000000..b4a34a4 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h @@ -0,0 +1,240 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * 24 May 2018 - @chepo for STM32F103VET6 + * Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "GTM32 Pro VB" +#define DEFAULT_MACHINE_NAME "M201" + +#define BOARD_NO_NATIVE_USB + +//#define DISABLE_DEBUG + +// +// It is required to disable JTAG function because its pins are +// used as GPIO to drive the Y axis stepper. +// DO NOT ENABLE! +// +#define DISABLE_JTAG + +// +// If you don't need the SWDIO functionality (any more), you may +// disable SWD here to regain PA13/PA14 pins for other use. +// +//#define DISABLE_JTAGSWD + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// Enable EEPROM Emulation for this board as it doesn't have EEPROM +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +// +// Limit Switches +// +#define X_MIN_PIN PE5 // ENDSTOPS 15,17 +#define X_MAX_PIN PE4 // ENDSTOPS 16,18 +#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 +#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 +#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 +#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 + +// +// Steppers +// +#define X_STEP_PIN PC6 +#define X_DIR_PIN PD13 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PA12 +#define Y_DIR_PIN PA11 +#define Y_ENABLE_PIN PA15 + +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PB3 + +// Extruder stepper pins +// NOTE: Numbering here is made according to EXT connector numbers, +// the FANx_PWM line numbering in the schematics is reverse. +// That is, E0_*_PIN are the E2_* lines connected to E2_A1 step +// stick that drives the EXT0 output on the board. +// +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 + +#define E1_STEP_PIN PA0 +#define E1_DIR_PIN PB6 +#define E1_ENABLE_PIN PA1 + +#define E2_STEP_PIN PB2 +#define E2_DIR_PIN PB11 +#define E2_ENABLE_PIN PC4 + +// +// Heaters / Fans - INFO: Extruders ports are in reverse order. Pin numbers here differ from schematic. Original firmware assumes heater, fan and temp sensor on port EXT0 PB0, PB9, PC2. +// +#define HEATER_0_PIN PB0 // EXT0 port. +#define HEATER_1_PIN PB5 // EXT1 port +#define HEATER_2_PIN PB4 // EXT2 port +#define HEATER_BED_PIN PB1 // CON2X3 hotbed port + +// +// These are FAN PWM pins on EXT0..EXT2 connectors. +// +//#define FAN_PIN PB9 // EXT0 port +#define FAN1_PIN PB8 // EXT1 port +#define FAN2_PIN PB7 // EXT2 port + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC2 // EXT0 port +#define TEMP_1_PIN PC1 // EXT1 port +#define TEMP_2_PIN PC0 // EXT2 port +#define TEMP_BED_PIN PC3 // CON2X3 hotbed port + +// +// Misc. Functions +// +#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + + #if IS_RRD_SC + + // + // LCD display on J2 FFC40 + // Geeetech's LCD2004A Control Panel is very much like + // RepRapDiscount Smart Controller, but adds an FFC40 connector + // connected with a flat wire to J2 connector on the board. + // + #define LCD_PINS_RS PA12 // CS chip select /SS chip slave select + // RW is hardwired to VSS + #define LCD_PINS_ENABLE PC7 // SID (MOSI) + #define LCD_PINS_D4 PD1 // SCK (CLK) clock + #define LCD_PINS_D5 PD4 + #define LCD_PINS_D6 PD5 + #define LCD_PINS_D7 PD7 + + #define BTN_EN1 PE8 + #define BTN_EN2 PE9 + #define BTN_ENC PE13 + + //#define GTM32_PRO_VB_USE_LCD_BEEPER + #define GTM32_PRO_VB_USE_EXT_SDCARD + + #else + // + // Serial LCDs can be implemented in ExtUI + // + //#define LCD_UART_TX PD8 + //#define LCD_UART_RX PD9 + #endif + + #if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(715) + #endif + #endif + +#endif // HAS_WIRED_LCD + +// +// Beeper +// +#ifdef GTM32_PRO_VB_USE_LCD_BEEPER + // This is pin 32 on J2 FFC40 and pin, goes to the beeper + // on Geeetech's version of RepRapDiscount Smart Controller + // (e.g. on Rostock 301) + #define BEEPER_PIN PE12 +#else + // This is the beeper on the board itself + #define BEEPER_PIN PB10 +#endif + +/** + * The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired. + * + * The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2) + * connector, which usually go to the SD Card slot on the Geeetech version of the + * RepRapDiscount Smart Controller. Both connectors have the card detect signal. + * + * The on-board SD card and the external card (on either SD_CARD or J2) are two + * separate devices and can work simultaneously. Unfortunately, Marlin only supports + * a single SPI Flash device (as of 2019-07-05) so only one is enabled here. + */ +#if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD) + // + // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector + // + #define SD_SS_PIN PB12 // PC11 + #define SD_SCK_PIN PB13 // PC12 // PC1 + #define SD_MOSI_PIN PB15 // PD2 // PD2 + #define SD_MISO_PIN PB14 // PC8 + #define SD_DETECT_PIN PC7 + +#else + // + // Use the on-board card socket labeled TF_CARD_SOCKET + // + #define SD_SS_PIN PA4 + #define SD_SCK_PIN PA5 + #define SD_MOSI_PIN PA7 + #define SD_MISO_PIN PA6 // PA6 + #define SD_DETECT_PIN -1 // Card detect is not connected +#endif + +#define SDSS SD_SS_PIN + +// +// ESP WiFi can be soldered to J9 connector which is wired to USART2. +// Must define WIFISUPPORT in Configuration.h for the printer. +// +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h new file mode 100644 index 0000000..4f02b0e --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h @@ -0,0 +1,132 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + + /** + * ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐ + * ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││ + * ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴ + * Pin assignments for 32-bit JGAurora A5S & A1 + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "JGAurora A5S A1 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "JGAurora A5S A1" + +#define BOARD_NO_NATIVE_USB + +#ifndef STM32_XL_DENSITY + #define STM32_XL_DENSITY +#endif + +//#define MCU_STM32F103ZE // not yet required +// Enable EEPROM Emulation for this board, so that we don't overwrite factory data + +//#define I2C_EEPROM // AT24C64 +//#define MARLIN_EEPROM_SIZE 0x8000UL // 64KB + +//#define FLASH_EEPROM_EMULATION +//#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB +//#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL) + +// +// Limit Switches +// +#define X_STOP_PIN PC6 +#define Y_STOP_PIN PG8 +#define Z_STOP_PIN PG7 +//#define X_MAX_PIN PC5 +//#define Y_MAX_PIN PC4 +//#define Z_MAX_PIN PB0 + +// +// Steppers +// +#define X_STEP_PIN PD6 +#define X_DIR_PIN PD3 +#define X_ENABLE_PIN PG9 + +#define Y_STEP_PIN PG12 +#define Y_DIR_PIN PG11 +#define Y_ENABLE_PIN PG13 + +#define Z_STEP_PIN PG15 +#define Z_DIR_PIN PG14 +#define Z_ENABLE_PIN PB8 + +#define E0_STEP_PIN PE2 +#define E0_DIR_PIN PB9 +#define E0_ENABLE_PIN PE3 + +#define E1_STEP_PIN PE5 +#define E1_DIR_PIN PE4 +#define E1_ENABLE_PIN PE6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC2 +#define TEMP_BED_PIN PC1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA2 +#define HEATER_BED_PIN PA3 + +#define FAN_PIN PA1 + +#define FIL_RUNOUT_PIN PC7 + +// +// LCD +// +#define LCD_BACKLIGHT_PIN PF11 +#define FSMC_CS_PIN PD7 +#define FSMC_RS_PIN PG0 + +#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT +#define FSMC_DMA_DEV DMA2 +#define FSMC_DMA_CHANNEL DMA_CH5 + +// +// SD Card +// +#define SD_DETECT_PIN PF10 + +// +// Misc. +// +#define BEEPER_PIN PC3 // use PB7 to shut up if desired +#define LED_PIN PC13 + +// +// Touch support +// +#if NEED_TOUCH_PINS + #define TOUCH_CS_PIN PA4 + #define TOUCH_INT_PIN PC4 +#endif diff --git a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h new file mode 100644 index 0000000..33f995d --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h @@ -0,0 +1,164 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Longer3D LK1/LK2 & Alfawise U20/U30 (STM32F103VET6) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__, STM32F1xx) + #error "Oops! Select a STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "Longer3D only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Longer3D" +#define ALFAWISE_UX0 // Common to all Longer3D STM32F1 boards (used for Open drain mosfets) + +#define BOARD_NO_NATIVE_USB + +//#define DISABLE_DEBUG // We still want to debug with STLINK... +#define DISABLE_JTAG // We free the jtag pins (PA15) but keep STLINK + // Release PB4 (STEP_X_PIN) from JTAG NRST role. +// +// Limit Switches +// +#define X_MIN_PIN PC1 // pin 16 +#define X_MAX_PIN PC0 // pin 15 (Filament sensor on Alfawise setup) +#define Y_MIN_PIN PC15 // pin 9 +#define Y_MAX_PIN PC14 // pin 8 (Unused in stock Alfawise setup) +#define Z_MIN_PIN PE6 // pin 5 Standard Endstop or Z_Probe endstop function +#define Z_MAX_PIN PE5 // pin 4 (Unused in stock Alfawise setup) + // May be used for BLTouch Servo function on older variants (<= V08) +#define ONBOARD_ENDSTOPPULLUPS + +// +// Filament Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true) +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PB5 // pin 91 +#define X_STEP_PIN PB4 // pin 90 +#define X_DIR_PIN PB3 // pin 89 + +#define Y_ENABLE_PIN PB8 // pin 95 +#define Y_STEP_PIN PB7 // pin 93 +#define Y_DIR_PIN PB6 // pin 92 + +#define Z_ENABLE_PIN PE1 // pin 98 +#define Z_STEP_PIN PE0 // pin 97 +#define Z_DIR_PIN PB9 // pin 96 + +#define E0_ENABLE_PIN PE4 // pin 3 +#define E0_STEP_PIN PE3 // pin 2 +#define E0_DIR_PIN PE2 // pin 1 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA0 // pin 23 (Nozzle 100K/3950 thermistor) +#define TEMP_BED_PIN PA1 // pin 24 (Hot Bed 100K/3950 thermistor) + +// +// Heaters / Fans +// +#define HEATER_0_PIN PD3 // pin 84 (Nozzle Heat Mosfet) +#define HEATER_BED_PIN PA8 // pin 67 (Hot Bed Mosfet) + +#define FAN_PIN PA15 // pin 77 (4cm Fan) +#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink +#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range +#define FAN_MAX_PWM 255 + +//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor + // Can drive a PC Buzzer, if connected between PWM and 5V pins + +#define LED_PIN PC2 // pin 17 + +// +// PWM for a servo probe +// Other servo devices are not supported on this board! +// +#if HAS_Z_SERVO_PROBE + #define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V) + #define SERVO0_PWM_OD // Comment this if using PE5 + + //#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0) + //#undef Z_MAX_PIN // Uncomment if using ZMAX connector (PE5) +#endif + +#define TFT_RESET_PIN PC4 // pin 33 +#define TFT_BACKLIGHT_PIN PD12 // pin 59 +#define FSMC_CS_PIN PD7 // pin 88 = FSMC_NE1 +#define FSMC_RS_PIN PD11 // pin 58 A16 Register. Only one address needed + +#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT +#define FSMC_DMA_DEV DMA2 +#define FSMC_DMA_CHANNEL DMA_CH5 + +#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h +#define DOGLCD_SCK -1 + +// Buffer for Color UI +#define TFT_BUFFER_SIZE 3200 + +/** + * Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer + * mixed up MOSI and MISO pins. SPI is managed in SW, and needs pins + * declared below. + */ +#if NEED_TOUCH_PINS + #define TOUCH_CS_PIN PB12 // pin 51 SPI2_NSS + #define TOUCH_SCK_PIN PB13 // pin 52 + #define TOUCH_MOSI_PIN PB14 // pin 53 + #define TOUCH_MISO_PIN PB15 // pin 54 + #define TOUCH_INT_PIN PC6 // pin 63 (PenIRQ coming from ADS7843) +#endif + +// +// Persistent Storage +// If no option is selected below the SD Card will be used +// +#if NO_EEPROM_SELECTED + //#define SPI_EEPROM + #define FLASH_EEPROM_EMULATION +#endif + +#if ENABLED(SPI_EEPROM) + // SPI1 EEPROM Winbond W25Q64 (8MB/64Mbits) + #define SPI_CHAN_EEPROM1 1 + #define SPI_EEPROM1_CS PC5 // pin 34 + #define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30 + #define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31 + #define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32 + #define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet) + #define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE) // Limit to 64KB for now... +#elif ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE) +#else + #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM +#endif diff --git a/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h b/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h new file mode 100644 index 0000000..e33e029 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h @@ -0,0 +1,95 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MALYAN M200 pin assignments + */ + +#if NOT_TARGET(__STM32F1__, STM32F1xx, STM32F0xx) + #error "Oops! Select an STM32 board in your IDE." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Malyan M200" +#endif + +// Prevents hanging from an extra watchdog init +#define DISABLE_WATCHDOG_INIT + +// Assume Flash EEPROM +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION +#endif + +#define SDSS SD_SS_PIN + +// Based on PWM timer usage, we have to use these timers and soft PWM for the fans +// On STM32F103: +// PB3, PB6, PB7, and PB8 can be used with pwm, which rules out TIM2 and TIM4. +// On STM32F070, 16 and 17 are in use, but 1 and 3 are available. +#define STEP_TIMER 1 +#define TEMP_TIMER 3 + +// +// Limit Switches +// +#define X_MIN_PIN PB4 +#define Y_MIN_PIN PA15 +#define Z_MIN_PIN PB5 + +// +// Steppers +// +// X & Y enable are the same +#define X_STEP_PIN PB14 +#define X_DIR_PIN PB15 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PB12 +#define Y_DIR_PIN PB13 +#define Y_ENABLE_PIN PA8 + +#define Z_STEP_PIN PB10 +#define Z_DIR_PIN PB2 +#define Z_ENABLE_PIN PB11 + +#define E0_STEP_PIN PB0 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PB1 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA0 // Analog Input (HOTEND0 thermistor) +#define TEMP_BED_PIN PA1 // Analog Input (BED thermistor) + +// +// Heaters / Fans +// +#define HEATER_0_PIN PB6 // HOTEND0 MOSFET +#define HEATER_BED_PIN PB7 // BED MOSFET + +#define MALYAN_FAN1_PIN PB8 // FAN1 header on board - PRINT FAN +#define MALYAN_FAN2_PIN PB3 // FAN2 header on board - CONTROLLER FAN + +#define FAN1_PIN MALYAN_FAN2_PIN diff --git a/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h b/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h new file mode 100644 index 0000000..429cf14 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h @@ -0,0 +1,176 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin mini (STM32F130VET6) board pin assignments + */ + +#if NOT_TARGET(STM32F1, STM32F1xx) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Mingda MPX_ARM_MINI" + +#define BOARD_NO_NATIVE_USB +#define DISABLE_DEBUG + +// +// EEPROM +// + +/* +//Mingda used an unknown EEPROM chip ATMLH753, so I turned on the emulation below. +//It is connected to EEPROM PB6 PB7 + +#define I2C_EEPROM +#undef NO_EEPROM_SELECTED +#define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#define USE_SHARED_EEPROM 1 // Use Platform-independent Arduino functions for I2C EEPROM +#define E2END 0xFFFF // EEPROM end address AT24C256 (32kB) +*/ + +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE 0x800U // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +#define SPI_DEVICE 2 + +// +// Limit Switches +// +#define X_MIN_PIN PD6 +#define X_MAX_PIN PG15 +#define Y_MIN_PIN PG9 +#define Y_MAX_PIN PG14 +#define Z_MIN_PIN PG10 +#define Z_MAX_PIN PG13 + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PG11 +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PD13 +#define X_STEP_PIN PD12 +#define X_DIR_PIN PD11 + +#define Y_ENABLE_PIN PG4 +#define Y_STEP_PIN PG3 +#define Y_DIR_PIN PG2 + +#define Z_ENABLE_PIN PG7 +#define Z_STEP_PIN PG6 +#define Z_DIR_PIN PG5 + +#define E0_ENABLE_PIN PC7 +#define E0_STEP_PIN PC6 +#define E0_DIR_PIN PG8 + +// +// Temperature Sensors +// +//#define TEMP_0_PIN PF6 // THERM_E0 +//#define TEMP_0_PIN PB3 // E0 K+ +#define TEMP_BED_PIN PF7 // THERM_BED + +#define MAX6675_SS_PIN PB5 +#define MAX6675_SCK_PIN PB3 +#define MAX6675_DO_PIN PB4 +#define MAX6675_MOSI_PIN PA14 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PB0 +#define HEATER_BED_PIN PB1 + +#define FAN_PIN PA0 // FAN + +// +// SD Card +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#define SDIO_SUPPORT +#define SDIO_CLOCK 4500000 // 4.5 MHz +#define SDIO_READ_RETRIES 16 + +#define SD_DETECT_PIN PC5 +#define ONBOARD_SPI_DEVICE 1 // SPI1 +#define ONBOARD_SD_CS_PIN PC10 + +// +// LCD / Controller +// +#define BEEPER_PIN PE4 + +/** + * Note: MKS Robin TFT screens use various TFT controllers. + * If the screen stays white, disable 'LCD_RESET_PIN' + * to let the bootloader init the screen. + */ +#if HAS_FSMC_TFT + /** + * Note: MKS Robin TFT screens use various TFT controllers + * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240) + * ILI9488 is not supported + * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp + * + * If the screen stays white, disable 'TFT_RESET_PIN' + * to let the bootloader init the screen. + * + * Setting an 'TFT_RESET_PIN' may cause a flicker when entering the LCD menu + * because Marlin uses the reset as a failsafe to revive a glitchy LCD. + */ + #define TFT_CS_PIN PD7 // NE4 + #define TFT_RS_PIN PG0 // A0 + + #define FSMC_CS_PIN TFT_CS_PIN + #define FSMC_RS_PIN TFT_RS_PIN + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + + #define TFT_RESET_PIN PF15 + #define TFT_BACKLIGHT_PIN PF11 + + #define TOUCH_BUTTONS_HW_SPI + #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 +#endif + +#if NEED_TOUCH_PINS + #define TOUCH_CS_PIN PA4 // SPI2_NSS + #define TOUCH_SCK_PIN PA5 // SPI2_SCK + #define TOUCH_MISO_PIN PA6 // SPI2_MISO + #define TOUCH_MOSI_PIN PA7 // SPI2_MOSI +#endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h new file mode 100644 index 0000000..99e0f0b --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h @@ -0,0 +1,283 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin (STM32F130ZET6) board pin assignments + * https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware + */ + +#if NOT_TARGET(STM32F1, STM32F1xx) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS Robin" + +#define BOARD_NO_NATIVE_USB + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_JTAG + +// +// EEPROM +// +#if NO_EEPROM_SELECTED + #ifdef ARDUINO_ARCH_STM32 + #define FLASH_EEPROM_EMULATION + #else + #define SDCARD_EEPROM_EMULATION + #endif +#endif + +#if ENABLED(FLASH_EEPROM_EMULATION) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE) +#endif + +// +// Servos +// +#define SERVO0_PIN PC3 // XS1 - 5 +#define SERVO1_PIN PA1 // XS1 - 6 +#define SERVO2_PIN PF9 // XS2 - 5 +#define SERVO3_PIN PF8 // XS2 - 6 + +// +// Limit Switches +// +#define X_MIN_PIN PB12 +#define X_MAX_PIN PB0 +#define Y_MIN_PIN PC5 +#define Y_MAX_PIN PC4 +#define Z_MIN_PIN PA4 +#define Z_MAX_PIN PF7 + +// +// Steppers +// +#define X_ENABLE_PIN PB9 +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB5 + +#define Y_ENABLE_PIN PB4 +#define Y_STEP_PIN PG15 +#define Y_DIR_PIN PG10 + +#define Z_ENABLE_PIN PD7 +#define Z_STEP_PIN PD3 +#define Z_DIR_PIN PG14 + +#define E0_ENABLE_PIN PG13 +#define E0_STEP_PIN PG8 +#define E0_DIR_PIN PA15 + +#define E1_ENABLE_PIN PA12 +#define E1_STEP_PIN PA11 +#define E1_DIR_PIN PA8 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_1_PIN PC2 // TH2 +#define TEMP_BED_PIN PC0 // TB1 + +// +// Heaters +// +#define HEATER_0_PIN PC7 // HEATER1 +#define HEATER_1_PIN PA6 // HEATER2 +#define HEATER_BED_PIN PC6 // HOT BED + +// +// Fan +// +#define FAN_PIN PA7 // FAN + +// +// Thermocouples +// +//#define MAX6675_SS_PIN PE5 // TC1 - CS1 +//#define MAX6675_SS_PIN PE6 // TC2 - CS2 + +// +// Filament runout sensor +// +#define FIL_RUNOUT_PIN PF11 // MT_DET + +// +// Power loss detection +// +#define POWER_LOSS_PIN PA2 // PW_DET + +// +// Power supply control +// +#define PS_ON_PIN PA3 // PW_OFF + +// +// Piezzoelectric speaker +// +#define BEEPER_PIN PC13 + +// +// Activity LED +// +#define LED_PIN PB2 + +// +// ESP12-S Wi-Fi module +// +#define WIFI_IO0_PIN PG1 + +// +// LCD screen +// +#if HAS_FSMC_TFT + /** + * Note: MKS Robin TFT screens use various TFT controllers + * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240) + * ILI9488 is not supported + * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp + * + * If the screen stays white, disable 'TFT_RESET_PIN' + * to let the bootloader init the screen. + * + * Setting an 'TFT_RESET_PIN' may cause a flicker when entering the LCD menu + * because Marlin uses the reset as a failsafe to revive a glitchy LCD. + */ + #define TFT_CS_PIN PG12 // NE4 + #define TFT_RS_PIN PF0 // A0 + + #define FSMC_CS_PIN TFT_CS_PIN + #define FSMC_RS_PIN TFT_RS_PIN + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + + #define TFT_RESET_PIN PF6 + #define TFT_BACKLIGHT_PIN PG11 + + #define TOUCH_BUTTONS_HW_SPI + #define TOUCH_BUTTONS_HW_SPI_DEVICE 2 + #define TFT_BUFFER_SIZE 14400 +#endif + +#if NEED_TOUCH_PINS + #define TOUCH_CS_PIN PB1 // SPI2_NSS + #define TOUCH_SCK_PIN PB13 // SPI2_SCK + #define TOUCH_MISO_PIN PB14 // SPI2_MISO + #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI + #define TOUCH_INT_PIN -1 +#endif + +// SPI2 is shared by LCD touch driver and flash +// SPI1(PA7) & SPI3(PB5) not available +#define SPI_DEVICE 2 + +#define SDIO_SUPPORT +#define SDIO_CLOCK 4500000 +#define SDIO_READ_RETRIES 16 +#if ENABLED(SDIO_SUPPORT) + #define SD_SCK_PIN PB13 // SPI2 + #define SD_MISO_PIN PB14 // SPI2 + #define SD_MOSI_PIN PB15 // SPI2 + /** + * MKS Robin has a few hardware revisions + * https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware + * + * MKS Robin <= V2.3 have no SD_DETECT_PIN. + * MKS Robin >= V2.4 have SD_DETECT_PIN on PF12. + * + * Uncomment here or add SD_DETECT_PIN to Configuration.h. + */ + //#define SD_DETECT_PIN -1 + //#define SD_DETECT_PIN PF12 // SD_CD +#else + // SD as custom software SPI (SDIO pins) + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 + #define SD_SS_PIN -1 + #define ONBOARD_SD_CS_PIN PC11 + #define SDSS PD2 + #define SD_DETECT_PIN -1 +#endif + +// +// Trinamic TMC2208/2209 UART +// +#if HAS_TMC_UART + /** + * This board does not have dedicated TMC UART pins. Custom wiring is needed. + * You may uncomment one of the options below, or add it to your Configuration.h. + * + * When using up to four TMC2209 drivers, hardware serial is recommented on + * MSerial0 or MSerial1. + * + * When using TMC2208 or more than four drivers, SoftwareSerial will be needed, + * to provide dedicated pins for each drier. + */ + + //#define TMC_HARDWARE_SERIAL + #if ENABLED(TMC_HARDWARE_SERIAL) + #define X_HARDWARE_SERIAL MSerial0 + #define X2_HARDWARE_SERIAL MSerial0 + #define Y_HARDWARE_SERIAL MSerial0 + #define Y2_HARDWARE_SERIAL MSerial0 + #define Z_HARDWARE_SERIAL MSerial0 + #define Z2_HARDWARE_SERIAL MSerial0 + #define E0_HARDWARE_SERIAL MSerial0 + #define E1_HARDWARE_SERIAL MSerial0 + #endif + + //#define TMC_SOFTWARE_SERIAL + #if ENABLED(TMC_SOFTWARE_SERIAL) + #define X_SERIAL_TX_PIN PF8 // SERVO3_PIN -- XS2 - 6 + #define Y_SERIAL_TX_PIN PF9 // SERVO2_PIN -- XS2 - 5 + #define Z_SERIAL_TX_PIN PA1 // SERVO1_PIN -- XS1 - 6 + #define E0_SERIAL_TX_PIN PC3 // SERVO0_PIN -- XS1 - 5 + #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN + #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN + #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN + #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN + #define TMC_BAUD_RATE 19200 + #endif +#endif + +// +// W25Q64 64Mb (8MB) SPI flash +// +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x800000 // 8MB + #define W25QXX_CS_PIN PG9 + #define W25QXX_MOSI_PIN PB15 + #define W25QXX_MISO_PIN PB14 + #define W25QXX_SCK_PIN PB13 +#endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h new file mode 100644 index 0000000..89ace34 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin E3 (STM32F103RCT6) board pin assignments + */ + +#if HOTENDS > 1 || E_STEPPERS > 1 + #error "MKS Robin E3 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS Robin E3" +#endif + +#include "pins_MKS_ROBIN_E3_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h new file mode 100644 index 0000000..a629bce --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h @@ -0,0 +1,67 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin E3D (STM32F103RCT6) board pin assignments + */ + +#if HOTENDS > 1 || E_STEPPERS > 1 + #error "MKS Robin E3D only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS Robin E3D" +#endif + +// +// Steppers +// +#ifndef X_CS_PIN + #define X_CS_PIN PC7 +#endif +#ifndef Y_CS_PIN + #define Y_CS_PIN PD2 +#endif +#ifndef Z_CS_PIN + #define Z_CS_PIN PC12 +#endif +#ifndef E0_CS_PIN + #define E0_CS_PIN PC11 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PB15 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB14 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB13 + #endif +#endif + +#include "pins_MKS_ROBIN_E3_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D_V1_1.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D_V1_1.h new file mode 100644 index 0000000..0d927cf --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D_V1_1.h @@ -0,0 +1,67 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin E3D v1.1 (STM32F103RCT6) board pin assignments + */ + +#if HOTENDS > 1 || E_STEPPERS > 1 + #error "MKS Robin E3D v1.1 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS Robin E3D V1.1" +#endif + +// +// Steppers +// +#ifndef X_CS_PIN + #define X_CS_PIN PC7 +#endif +#ifndef Y_CS_PIN + #define Y_CS_PIN PD2 +#endif +#ifndef Z_CS_PIN + #define Z_CS_PIN PC12 +#endif +#ifndef E0_CS_PIN + #define E0_CS_PIN PC11 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PB15 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB14 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB13 + #endif +#endif + +#include "pins_MKS_ROBIN_E3_V1_1_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h new file mode 100644 index 0000000..3118a52 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -0,0 +1,346 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin nano (STM32F130VET6) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "MKS Robin E3P only supports one hotend / E-stepper. Comment out this line to continue." +#elif HAS_FSMC_TFT + #error "MKS Robin E3P doesn't support FSMC-based TFT displays." +#endif + +#define BOARD_INFO_NAME "MKS Robin E3P" + +#define BOARD_NO_NATIVE_USB + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +// +// EEPROM +// +//#define FLASH_EEPROM_EMULATION +//#define SDCARD_EEPROM_EMULATION + +#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM) + #define I2C_EEPROM // EEPROM on I2C-0 + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +// +// Note: MKS Robin board is using SPI2 interface. +// +#define SPI_DEVICE 2 + +// +// Servos +// +#define SERVO0_PIN PA8 // Enable BLTOUCH + +// +// Limit Switches +// +#define X_DIAG_PIN PA15 +#define Y_DIAG_PIN PA12 +#define Z_DIAG_PIN PA11 +#define E0_DIAG_PIN PC4 + +#define X_STOP_PIN PA15 +#define Y_STOP_PIN PA12 +#define Z_MIN_PIN PA11 +#define Z_MAX_PIN PC4 + +// +// Steppers +// +#define X_ENABLE_PIN PE4 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 +#ifndef X_CS_PIN + #define X_CS_PIN PD5 +#endif + +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PE0 +#define Y_DIR_PIN PB9 +#ifndef Y_CS_PIN + #define Y_CS_PIN PD7 +#endif + +#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB4 +#ifndef Z_CS_PIN + #define Z_CS_PIN PD4 +#endif + +#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PD6 +#define E0_DIR_PIN PD3 +#ifndef E0_CS_PIN + #define E0_CS_PIN PD9 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PD14 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PD1 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PD0 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial + // + + #define X_SERIAL_TX_PIN PD5 + #define X_SERIAL_RX_PIN PD5 + + #define Y_SERIAL_TX_PIN PD7 + #define Y_SERIAL_RX_PIN PD7 + + #define Z_SERIAL_TX_PIN PD4 + #define Z_SERIAL_RX_PIN PD4 + + #define E0_SERIAL_TX_PIN PD9 + #define E0_SERIAL_RX_PIN PD9 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif // HAS_TMC_UART + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_BED_PIN PC0 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC3 // HEATER1 +#define HEATER_BED_PIN PA0 // HOT BED + +#define FAN_PIN PB1 // FAN + +// +// Misc. Functions +// +#if HAS_TFT_LVGL_UI + //#define MKSPWC + #ifdef MKSPWC + #define SUICIDE_PIN PB2 // Enable MKSPWC SUICIDE PIN + #define SUICIDE_PIN_INVERTING false // Enable MKSPWC PIN STATE + #define KILL_PIN PA2 // Enable MKSPWC DET PIN + #define KILL_PIN_STATE true // Enable MKSPWC PIN STATE + #endif + + #define MT_DET_1_PIN PA4 // LVGL UI FILAMENT RUNOUT1 PIN + #define MT_DET_PIN_INVERTING false // LVGL UI filament RUNOUT PIN STATE + + #define WIFI_IO0_PIN PC13 // MKS ESP WIFI IO0 PIN + #define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN + #define WIFI_RESET_PIN PE9 // MKS ESP WIFI RESET PIN + + #if ENABLED(MKS_TEST) + #define MKS_TEST_POWER_LOSS_PIN PA2 // PW_DET + #define MKS_TEST_PS_ON_PIN PB0 // PW_OFF + #endif +#else + //#define POWER_LOSS_PIN PA2 // PW_DET + //#define PS_ON_PIN PB2 // PW_OFF + #define FIL_RUNOUT_PIN PA4 +#endif + +//#define LED_PIN PB2 + +// +// SD Card +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#define SDIO_SUPPORT +#define SDIO_CLOCK 4500000 // 4.5 MHz +#define SD_DETECT_PIN PD12 +#define ONBOARD_SD_CS_PIN PC11 + +// +// LCD / Controller +// +#ifndef BEEPER_PIN + #define BEEPER_PIN PC5 +#endif + +/** + * Note: MKS Robin TFT screens use various TFT controllers. + * If the screen stays white, disable 'LCD_RESET_PIN' + * to let the bootloader init the screen. + */ + +#if HAS_SPI_TFT + + // Shared SPI TFT + + #define LCD_BACKLIGHT_PIN PD13 + + #define TOUCH_CS_PIN PE14 // SPI1_NSS + #define TOUCH_SCK_PIN PA5 // SPI1_SCK + #define TOUCH_MISO_PIN PA6 // SPI1_MISO + #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 + #define BTN_ENC PE13 + + #define TFT_CS_PIN PD11 + #define TFT_SCK_PIN PA5 + #define TFT_MISO_PIN PA6 + #define TFT_MOSI_PIN PA7 + #define TFT_DC_PIN PD10 + #define TFT_RST_PIN PC6 + #define TFT_A0_PIN TFT_DC_PIN + + #define TFT_RESET_PIN PC6 + #define TFT_BACKLIGHT_PIN PD13 + + #define TOUCH_BUTTONS_HW_SPI + #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 + + #ifndef TFT_WIDTH + #define TFT_WIDTH 480 + #endif + #ifndef TFT_HEIGHT + #define TFT_HEIGHT 320 + #endif + + #define LCD_READ_ID 0xD3 + #define LCD_USE_DMA_SPI + +#endif + +#if HAS_SPI_GRAPHICAL_TFT + // Emulated DOGM SPI + #define LCD_PINS_ENABLE PD13 + #define LCD_PINS_RS PC6 + #define BTN_ENC PE13 + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 +#elif ENABLED(TFT_480x320_SPI) + #define TFT_DRIVER ST7796 + #define TFT_BUFFER_SIZE 14400 +#endif + +#if HAS_WIRED_LCD && !HAS_SPI_TFT + + // NON TFT Displays + + #if ENABLED(MKS_MINI_12864) + + // MKS MINI12864 and MKS LCD12864B + // If using MKS LCD12864A (Need to remove RPK2 resistor) + + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PD11 + #define DOGLCD_CS PE15 + #define DOGLCD_SCK PA5 + #define DOGLCD_MOSI PA7 + + // Required for MKS_MINI_12864 with this board + #define MKS_LCD12864B + #undef SHOW_BOOTSCREEN + + #else // !MKS_MINI_12864 + + #define LCD_PINS_D4 PE14 + #if IS_ULTIPANEL + #define LCD_PINS_D5 PE15 + #define LCD_PINS_D6 PD11 + #define LCD_PINS_D7 PD10 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + #endif + + #endif // !MKS_MINI_12864 + +#endif // HAS_WIRED_LCD && !HAS_SPI_TFT + +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x1000000 // 16MB + #define W25QXX_CS_PIN PB12 + #define W25QXX_MOSI_PIN PB15 + #define W25QXX_MISO_PIN PB14 + #define W25QXX_SCK_PIN PB13 +#endif + +#if ENABLED(SPEAKER) && BEEPER_PIN == PC5 + #error "MKS Robin nano default BEEPER_PIN is not a SPEAKER." +#endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_V1_1.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_V1_1.h new file mode 100644 index 0000000..002c35f --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_V1_1.h @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin E3 v1.1 (STM32F103RCT6) board pin assignments + */ + +#if HOTENDS > 1 || E_STEPPERS > 1 + #error "MKS Robin E3 v1.1 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS Robin E3 V1.1" +#endif + +#include "pins_MKS_ROBIN_E3_V1_1_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_V1_1_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_V1_1_common.h new file mode 100644 index 0000000..4eaf2e9 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_V1_1_common.h @@ -0,0 +1,39 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +// +// EEPROM +// +// Onboard I2C EEPROM +#if NO_EEPROM_SELECTED + #define I2C_EEPROM + #define MARLIN_EEPROM_SIZE 0x1000// 4KB + #undef NO_EEPROM_SELECTED +#endif + +#define Z_STEP_PIN PC14 +#define Z_DIR_PIN PC15 + +#define BTN_ENC_EN -1 + +#include "pins_MKS_ROBIN_E3_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h new file mode 100644 index 0000000..c4a7e9f --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h @@ -0,0 +1,196 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin E3 & E3D (STM32F103RCT6) common board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_NO_NATIVE_USB + +#define BOARD_WEBSITE_URL "github.com/makerbase-mks" + +//#define DISABLE_DEBUG +#define DISABLE_JTAG + +// +// EEPROM +// +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +// +// Servos +// +#define SERVO0_PIN PA3 + +// +// Limit Switches +// +#define X_STOP_PIN PA12 +#define Y_STOP_PIN PA11 +#define Z_MIN_PIN PC6 +#define Z_MAX_PIN PB1 + +// +// Steppers +// +#define X_STEP_PIN PC0 +#define X_DIR_PIN PB2 +#define X_ENABLE_PIN PC13 + +#define Y_STEP_PIN PC2 +#define Y_DIR_PIN PB9 +#define Y_ENABLE_PIN PB12 + +#ifndef Z_STEP_PIN + #define Z_STEP_PIN PB7 +#endif +#ifndef Z_DIR_PIN + #define Z_DIR_PIN PB6 +#endif +#define Z_ENABLE_PIN PB8 + +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB3 +#define E0_ENABLE_PIN PB5 + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL MSerial1 + //#define Y_HARDWARE_SERIAL MSerial1 + //#define Z_HARDWARE_SERIAL MSerial1 + //#define E0_HARDWARE_SERIAL MSerial1 + + // + // Software serial + // + #define X_SERIAL_TX_PIN PC7 + #define X_SERIAL_RX_PIN PC7 + + #define Y_SERIAL_TX_PIN PD2 + #define Y_SERIAL_RX_PIN PD2 + + #define Z_SERIAL_TX_PIN PC12 + #define Z_SERIAL_RX_PIN PC12 + + #define E0_SERIAL_TX_PIN PC11 + #define E0_SERIAL_RX_PIN PC11 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif + +// +// Heaters 0,1 / Fans / Bed +// +#define HEATER_0_PIN PC9 +#define FAN_PIN PA8 +#define HEATER_BED_PIN PC8 + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA1 // TB +#define TEMP_0_PIN PA0 // TH1 + +#define FIL_RUNOUT_PIN PB10 // MT_DET + +/** + * _____ _____ _____ + * (BEEPER) PC1 | 1 2 | PC3 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK) 5V | 1 2 | GND + * (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA15 (SD_SS) (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) + * (LCD_D4) PA6 | 5 6 PA7 (LCD_D5) (BTN_EN2) PB0 | 5 6 PB15 (SD_MOSI) (LCD_D4) PA6 | 5 6 PB0 (BTN_EN2) + * (LCD_D6) PC4 | 7 8 | PC5 (LCD_D7) (SD_DETECT) PC10 | 7 8 | RESET RESET | 7 8 | PB11 (BTN_EN1) + * GND | 9 10| 5V GND | 9 10| NC (BTN_ENC) PC3 | 9 10| PC1 (BEEPER) + * ----- ----- ----- + * EXP1 EXP2 EXP3 + */ +#if HAS_WIRED_LCD + + #define BEEPER_PIN PC1 + #define BTN_ENC PC3 + #define LCD_PINS_ENABLE PA4 + #define LCD_PINS_RS PA5 + #define BTN_EN1 PB11 + #define BTN_EN2 PB0 + + // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor) + #if ENABLED(MKS_MINI_12864) + + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PC4 + #define DOGLCD_CS PA7 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 + + #else + + #define LCD_PINS_D4 PA6 + #if IS_ULTIPANEL + #define LCD_PINS_D5 PA7 + #define LCD_PINS_D6 PC4 + #define LCD_PINS_D7 PC5 + + #if !defined(BTN_ENC_EN) && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #endif // !MKS_MINI_12864 + +#endif // HAS_WIRED_LCD + +// +// SD Card +// +#define SPI_DEVICE 2 +#define SD_DETECT_PIN PC10 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN PB14 +#define SD_MOSI_PIN PB15 +#define SD_SS_PIN PA15 + +#ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) +#endif +#ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) +#endif +#ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) +#endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h new file mode 100644 index 0000000..13c2d41 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h @@ -0,0 +1,148 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "MKS Robin Lite only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS Robin Lite" +#endif +#define BOARD_WEBSITE_URL "github.com/makerbase-mks" + +#define BOARD_NO_NATIVE_USB + +//#define DISABLE_DEBUG +#define DISABLE_JTAG + +// +// Limit Switches +// +#define X_STOP_PIN PC13 +#define Y_STOP_PIN PC0 +#define Z_MIN_PIN PC12 +#define Z_MAX_PIN PB9 + +// +// Steppers +// +#define X_STEP_PIN PC6 +#define X_DIR_PIN PB12 +#define X_ENABLE_PIN PB10 + +#define Y_STEP_PIN PB11 +#define Y_DIR_PIN PB2 +#define Y_ENABLE_PIN PB10 + +#define Z_STEP_PIN PB1 +#define Z_DIR_PIN PC5 +#define Z_ENABLE_PIN PB10 + +#define E0_STEP_PIN PC4 +#define E0_DIR_PIN PA5 +#define E0_ENABLE_PIN PA4 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC9 +#define FAN_PIN PA8 +#define HEATER_BED_PIN PC8 + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA1 +#define TEMP_0_PIN PA0 + +#define FIL_RUNOUT_PIN PB8 // MT_DET + +// +// LCD Pins +// +#if HAS_WIRED_LCD + #define BEEPER_PIN PD2 + #define BTN_ENC PB3 + #define LCD_PINS_RS PC3 + + #define BTN_EN1 PB5 + #define BTN_EN2 PB4 + + #define LCD_PINS_ENABLE PC2 + + #if ENABLED(MKS_MINI_12864) + + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PC1 + #define DOGLCD_CS PC2 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 + + #else // !MKS_MINI_12864 + + #define LCD_PINS_D4 PC1 + #if IS_ULTIPANEL + #define LCD_PINS_D5 -1 + #define LCD_PINS_D6 -1 + #define LCD_PINS_D7 -1 + #endif + + #endif // !MKS_MINI_12864 + + #if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + #endif + #endif + +#endif // HAS_WIRED_LCD + +// Motor current PWM pins +#define MOTOR_CURRENT_PWM_XY_PIN PB0 +#define MOTOR_CURRENT_PWM_Z_PIN PA7 +#define MOTOR_CURRENT_PWM_E_PIN PA6 +#define MOTOR_CURRENT_PWM_RANGE (65535/10/3.3) // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp +#define DEFAULT_PWM_MOTOR_CURRENT { 1000, 1000, 1000 } // 1.05Amp per driver, here is XY, Z and E. This values determined empirically. + +// +// SD Card +// +#define SD_DETECT_PIN PC10 + +// +// SPI +// +#define SPI_DEVICE 2 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN P1B4 +#define SD_MOSI_PIN P1B5 +#define SD_SS_PIN PA15 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h new file mode 100644 index 0000000..f814052 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h @@ -0,0 +1,159 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin Lite 3 (STM32F103RCT6) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS Robin Lite3 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS Robin Lite3" +#endif +#define BOARD_WEBSITE_URL "github.com/makerbase-mks" + +#define BOARD_NO_NATIVE_USB + +//#define DISABLE_DEBUG +#define DISABLE_JTAG + +// +// Servos +// +#define SERVO0_PIN PA3 + +// +// Limit Switches +// +#define X_STOP_PIN PA12 +#define Y_STOP_PIN PA11 +#define Z_MIN_PIN PC6 +#define Z_MAX_PIN PB1 + +// +// Steppers +// +#define X_STEP_PIN PC0 +#define X_DIR_PIN PB2 +#define X_ENABLE_PIN PC13 + +#define Y_STEP_PIN PC2 +#define Y_DIR_PIN PB9 +#define Y_ENABLE_PIN PB12 + +#define Z_STEP_PIN PB7 +#define Z_DIR_PIN PB6 +#define Z_ENABLE_PIN PB8 + +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB3 +#define E0_ENABLE_PIN PB5 + +#define E1_STEP_PIN PC12 +#define E1_DIR_PIN PC11 +#define E1_ENABLE_PIN PD2 + +// +// Heaters 0,1 / Fans / Bed +// +#define HEATER_0_PIN PC9 +#define HEATER_1_PIN PC7 +#define FAN_PIN PA8 +#define HEATER_BED_PIN PC8 + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA1 // TB +#define TEMP_0_PIN PA0 // TH1 +#define TEMP_1_PIN PA2 // TH2 + +#define FIL_RUNOUT_PIN PB10 // MT_DET + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #define BEEPER_PIN PC1 + #define BTN_ENC PC3 + #define LCD_PINS_ENABLE PA4 + #define LCD_PINS_RS PA5 + #define BTN_EN1 PB11 + #define BTN_EN2 PB0 + + // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor) + #if ENABLED(MKS_MINI_12864) + + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PC4 + #define DOGLCD_CS PA7 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 + + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS PB11 + #endif + + #else // !MKS_MINI_12864 + + #define LCD_PINS_D4 PA6 + #if IS_ULTIPANEL + #define LCD_PINS_D5 PA7 + #define LCD_PINS_D6 PC4 + #define LCD_PINS_D7 PC5 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #endif // !MKS_MINI_12864 + + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + +#endif // HAS_WIRED_LCD + +// +// SD Card +// +#define SD_DETECT_PIN PC10 + +// +// SPI +// +#define SPI_DEVICE 2 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN PB14 +#define SD_MOSI_PIN PB15 +#define SD_SS_PIN PA15 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h new file mode 100644 index 0000000..b3cfe5b --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h @@ -0,0 +1,201 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin mini (STM32F130VET6) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "MKS Robin mini only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS Robin Mini" + +#define BOARD_NO_NATIVE_USB + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +// +// EEPROM +// +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +#define SPI_DEVICE 2 + +// +// Servos +// +#ifndef SERVO0_PIN + #define SERVO0_PIN PA8 // Enable BLTOUCH support on IO0 (WIFI connector) +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PA15 +#define Y_STOP_PIN PA12 +#define Z_MIN_PIN PA11 +#define Z_MAX_PIN PC4 + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PA4 // MT_DET +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PE4 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 + +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PE0 +#define Y_DIR_PIN PB9 + +#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB4 + +#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PD6 +#define E0_DIR_PIN PD3 + +// Motor current PWM pins +#define MOTOR_CURRENT_PWM_XY_PIN PA6 +#define MOTOR_CURRENT_PWM_Z_PIN PA7 +#define MOTOR_CURRENT_PWM_E_PIN PB0 +#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp +#ifndef DEFAULT_PWM_MOTOR_CURRENT + #define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 } +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_BED_PIN PC0 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC3 +#define HEATER_BED_PIN PA0 + +#define FAN_PIN PB1 // FAN + +// +// Misc. Functions +// +#define POWER_LOSS_PIN PA2 // PW_DET +#define PS_ON_PIN PA3 // PW_OFF + +#define MT_DET_1_PIN PA4 +#define MT_DET_PIN_INVERTING false + +#define WIFI_IO0_PIN PC13 + +// +// SD Card +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#define SDIO_SUPPORT +#define SDIO_CLOCK 4500000 // 4.5 MHz +#define SD_DETECT_PIN PD12 +#define ONBOARD_SPI_DEVICE 1 // SPI1 +#define ONBOARD_SD_CS_PIN PC11 + +// +// LCD / Controller +// +#define BEEPER_PIN PC5 + +/** + * Note: MKS Robin TFT screens use various TFT controllers. + * If the screen stays white, disable 'LCD_RESET_PIN' + * to let the bootloader init the screen. + */ +#if EITHER(HAS_FSMC_GRAPHICAL_TFT, TFT_320x240) + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PD11 // A0 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + + #define LCD_RESET_PIN PC6 // FSMC_RST + #define LCD_BACKLIGHT_PIN PD13 +#endif + +#if BOTH(NEED_TOUCH_PINS, HAS_FSMC_GRAPHICAL_TFT) || ENABLED(TFT_320x240) + #define TOUCH_CS_PIN PC2 // SPI2_NSS + #define TOUCH_SCK_PIN PB13 // SPI2_SCK + #define TOUCH_MISO_PIN PB14 // SPI2_MISO + #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI +#endif + +#if ENABLED(TFT_320x240) // TFT32/28 + #define TFT_DRIVER ILI9341 + #define TFT_BUFFER_SIZE 14400 + #define ILI9341_COLOR_RGB + // YV for normal screen mounting + #define ILI9341_ORIENTATION ILI9341_MADCTL_MY | ILI9341_MADCTL_MV + // XV for 180° rotated screen mounting + //#define ILI9341_ORIENTATION ILI9341_MADCTL_MX | ILI9341_MADCTL_MV +#endif + +#if ENABLED(TOUCH_SCREEN) + #ifndef TOUCH_CALIBRATION_X + #define TOUCH_CALIBRATION_X 12033 + #endif + #ifndef TOUCH_CALIBRATION_Y + #define TOUCH_CALIBRATION_Y -9047 + #endif + #ifndef TOUCH_OFFSET_X + #define TOUCH_OFFSET_X -30 + #endif + #ifndef TOUCH_OFFSET_Y + #define TOUCH_OFFSET_Y 254 + #endif +#endif + +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x1000000 // 16MB + #define W25QXX_CS_PIN PB12 // Flash chip-select + #define W25QXX_MOSI_PIN PB15 + #define W25QXX_MISO_PIN PB14 + #define W25QXX_SCK_PIN PB13 +#endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h new file mode 100644 index 0000000..36ae696 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h @@ -0,0 +1,345 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin nano (STM32F130VET6) board pin assignments + * https://github.com/makerbase-mks/MKS-Robin-Nano-V1.X/tree/master/hardware + */ + +#if NOT_TARGET(STM32F1, STM32F1xx) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS Robin Nano" + +#define BOARD_NO_NATIVE_USB + +// Avoid conflict with TIMER_SERVO when using the STM32 HAL +#define TEMP_TIMER 5 + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_JTAG + +// +// EEPROM +// +#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB +#endif + +#define SPI_DEVICE 2 + +// +// Servos +// +#define SERVO0_PIN PA8 // Enable BLTOUCH + +// +// Limit Switches +// +#define X_STOP_PIN PA15 +#define Y_STOP_PIN PA12 +#define Z_MIN_PIN PA11 +#define Z_MAX_PIN PC4 +// +//TMC UART RX / TX Pins Hardware/Software Serial +// +#if HAS_TMC220x + /** + * TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + * + * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. + * Set the address using jumpers on pins MS1 and MS2. + * Address | MS1 | MS2 + * 0 | LOW | LOW + * 1 | HIGH | LOW + * 2 | LOW | HIGH + * 3 | HIGH | HIGH + */ + + // Set Hardware Serial UART only für TCM 2209 + //#define HARDWARE_SERIAL + // Set Software Serial UART for TMC 2208 / TMC 2209 + #define SOFTWARE_SERIAL + + #if ENABLED(HARDWARE_SERIAL) + //#define X_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + #define X_SLAVE_ADDRESS 3 // | | : + #define Y_SLAVE_ADDRESS 2 // : | : + #define Z_SLAVE_ADDRESS 1 // | : : + #define E0_SLAVE_ADDRESS 0 // : : : + + #ifdef E1_DRIVER_TYPE + #define E1_SLAVE_ADDRESS 0 // : : : + #endif + #ifdef Z2_DRIVER_TYPE + #define Z2_SLAVE_ADDRESS 0 // : : : + #endif + + #define X_SERIAL_TX_PIN PA9 + #define X_SERIAL_RX_PIN PA9 + + #define Y_SERIAL_TX_PIN PA9 + #define Y_SERIAL_RX_PIN PA9 + + #define Z_SERIAL_TX_PIN PA9 + #define Z_SERIAL_RX_PIN PA9 + + #define E0_SERIAL_TX_PIN PA5 + #define E0_SERIAL_RX_PIN PA5 + + #ifdef E1_DRIVER_TYPE + #define E1_SERIAL_TX_PIN PA9 + #define E1_SERIAL_RX_PIN PA9 + #endif + + #ifdef Z2_DRIVER_TYPE + #define E1_SERIAL_TX_PIN PA9 + #define E1_SERIAL_RX_PIN PA9 + #endif + + #elif ENABLED (SOFTWARE_SERIAL) + + //Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers on the same PIN to the same Slave Address. + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 0 + #define Z_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 0 + #ifdef E1_DRIVER_TYPE + #define E1_SLAVE_ADDRESS 0 + #endif + #ifdef Z2_DRIVER_TYPE + #define Z2_SLAVE_ADDRESS 0 + #endif + + #define X_SERIAL_TX_PIN PA3 + #define X_SERIAL_RX_PIN PA3 + + #define Y_SERIAL_TX_PIN PA6 + #define Y_SERIAL_RX_PIN PA6 + + #define Z_SERIAL_TX_PIN PA1 + #define Z_SERIAL_RX_PIN PA1 + + #define E0_SERIAL_TX_PIN PE5 + #define E0_SERIAL_RX_PIN PE5 + + #ifdef E1_DRIVER_TYPE + #define E1_SERIAL_TX_PIN PA9 + #define E1_SERIAL_RX_PIN PA9 + #endif + + #ifdef Z2_DRIVER_TYPE + #define E1_SERIAL_TX_PIN PA9 + #define E1_SERIAL_RX_PIN PA9 + #endif + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 + #endif +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PE4 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 + +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PE0 +#define Y_DIR_PIN PB9 + +#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB4 + +#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PD6 +#define E0_DIR_PIN PD3 + +#define E1_ENABLE_PIN PA3 +#define E1_STEP_PIN PA6 +#define E1_DIR_PIN PA1 +#if ENABLED(SOFTWARE_SERIAL) + //#define E1_ENABLE_PIN PA3 // USED BY UART X Don't change + //#define E1_STEP_PIN PA6 // USED BY UART Y Don't change + //#define E1_DIR_PIN PA1 // USED BY UART Z Don't change + #else + #define E1_ENABLE_PIN PA3 + #define E1_STEP_PIN PA6 + #define E1_DIR_PIN PA1 + #endif +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_1_PIN PC2 // TH2 +#define TEMP_BED_PIN PC0 // TB1 + +// +// Heaters / Fans +// +#ifndef HEATER_0_PIN + #define HEATER_0_PIN PC3 +#endif +#if HOTENDS == 1 + #ifndef FAN1_PIN + #define FAN1_PIN PB0 + #endif +#else + #ifndef HEATER_1_PIN + #define HEATER_1_PIN PB0 + #endif +#endif +#ifndef FAN_PIN + #define FAN_PIN PB1 // FAN +#endif +#ifndef HEATER_BED_PIN + #define HEATER_BED_PIN PA0 +#endif + +// +// Thermocouples +// +//#define MAX6675_SS_PIN PE5 // TC1 - CS1 +//#define MAX6675_SS_PIN PE6 // TC2 - CS2 + +// +// Misc. Functions +// +#if HAS_TFT_LVGL_UI + // LVGL + #ifndef TOUCH_CALIBRATION_X + #define TOUCH_CALIBRATION_X 17880 + #endif + #ifndef TOUCH_CALIBRATION_Y + #define TOUCH_CALIBRATION_Y -12234 + #endif + #ifndef TOUCH_OFFSET_X + #define TOUCH_OFFSET_X -45 + #endif + #ifndef TOUCH_OFFSET_Y + #define TOUCH_OFFSET_Y 349 + #endif + #ifndef TOUCH_ORIENTATION + #define TOUCH_ORIENTATION TOUCH_LANDSCAPE + #endif + + //#define MKSPWC + #ifdef MKSPWC + #define SUICIDE_PIN PB2 // Enable MKSPWC SUICIDE PIN + #define SUICIDE_PIN_INVERTING false // Enable MKSPWC PIN STATE + #define KILL_PIN PA2 // Enable MKSPWC DET PIN + #define KILL_PIN_STATE true // Enable MKSPWC PIN STATE + #endif + + #define MT_DET_1_PIN PA4 // LVGL UI FILAMENT RUNOUT1 PIN + #define MT_DET_2_PIN PE6 // LVGL UI FILAMENT RUNOUT2 PIN + #define MT_DET_PIN_INVERTING false // LVGL UI filament RUNOUT PIN STATE + + #define WIFI_IO0_PIN PC13 // MKS ESP WIFI IO0 PIN + #define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN + #define WIFI_RESET_PIN PA5 // MKS ESP WIFI RESET PIN +#else + //#define POWER_LOSS_PIN PA2 // PW_DET + //#define PS_ON_PIN PB2 // PW_OFF + #define FIL_RUNOUT_PIN PA4 + #define FIL_RUNOUT2_PIN PE6 +#endif + +//#define LED_PIN PB2 + +// +// SD Card +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#define SDIO_SUPPORT +#define SDIO_CLOCK 4500000 // 4.5 MHz +#define SD_DETECT_PIN PD12 +#define ONBOARD_SD_CS_PIN PC11 + +// +// LCD / Controller +// +#define BEEPER_PIN PC5 + +/** + * Note: MKS Robin TFT screens use various TFT controllers. + * If the screen stays white, disable 'TFT_RESET_PIN' + * to let the bootloader init the screen. + */ +// Shared FSMC Configs +#if HAS_FSMC_TFT + #define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h + #define DOGLCD_SCK -1 + + #define TOUCH_CS_PIN PA7 // SPI2_NSS + #define TOUCH_SCK_PIN PB13 // SPI2_SCK + #define TOUCH_MISO_PIN PB14 // SPI2_MISO + #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI + + #define TFT_RESET_PIN PC6 // FSMC_RST + #define TFT_BACKLIGHT_PIN PD13 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PD11 + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN + + #define TOUCH_BUTTONS_HW_SPI + #define TOUCH_BUTTONS_HW_SPI_DEVICE 2 + + #define TFT_BUFFER_SIZE 14400 +#endif + +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x1000000 // 16MB + #define W25QXX_CS_PIN PB12 + #define W25QXX_MOSI_PIN PB15 + #define W25QXX_MISO_PIN PB14 + #define W25QXX_SCK_PIN PB13 +#endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h new file mode 100644 index 0000000..5bc499f --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -0,0 +1,406 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin nano (STM32F130VET6) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__, STM32F1) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue." +#elif HAS_FSMC_TFT + #error "MKS Robin nano v2 doesn't support FSMC-based TFT displays." +#endif + +#define BOARD_INFO_NAME "MKS Robin nano V2.0" + +#define BOARD_NO_NATIVE_USB + +// Avoid conflict with TIMER_SERVO when using the STM32 HAL +#define TEMP_TIMER 5 + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +// +// EEPROM +// +//#define FLASH_EEPROM_EMULATION +//#define SDCARD_EEPROM_EMULATION + +#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM) + #define I2C_EEPROM // EEPROM on I2C-0 + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +// +// Note: MKS Robin board is using SPI2 interface. +// +#define SPI_DEVICE 2 + +// +// Servos +// +#define SERVO0_PIN PA8 // Enable BLTOUCH + +// +// Limit Switches +// +#define X_DIAG_PIN PA15 +#define Y_DIAG_PIN PA12 +#define Z_DIAG_PIN PA11 +#define E0_DIAG_PIN PC4 +#define E1_DIAG_PIN PE7 + +#define X_STOP_PIN PA15 +#define Y_STOP_PIN PA12 +#define Z_MIN_PIN PA11 +#define Z_MAX_PIN PC4 + +// +// Steppers +// +#define X_ENABLE_PIN PE4 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 +#ifndef X_CS_PIN + #define X_CS_PIN PD5 +#endif + +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PE0 +#define Y_DIR_PIN PB9 +#ifndef Y_CS_PIN + #define Y_CS_PIN PD7 +#endif + +#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB4 +#ifndef Z_CS_PIN + #define Z_CS_PIN PD4 +#endif + +#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PD6 +#define E0_DIR_PIN PD3 +#ifndef E0_CS_PIN + #define E0_CS_PIN PD9 +#endif + +#define E1_ENABLE_PIN PA3 +#define E1_STEP_PIN PD15 +#define E1_DIR_PIN PA1 +#ifndef E1_CS_PIN + #define E1_CS_PIN PD8 +#endif + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PD14 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PD1 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PD0 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL MSerial1 + //#define Y_HARDWARE_SERIAL MSerial1 + //#define Z_HARDWARE_SERIAL MSerial1 + //#define E0_HARDWARE_SERIAL MSerial1 + //#define E1_HARDWARE_SERIAL MSerial1 + + // + // Software serial + // + + #define X_SERIAL_TX_PIN PD5 + #define X_SERIAL_RX_PIN PD5 + + #define Y_SERIAL_TX_PIN PD7 + #define Y_SERIAL_RX_PIN PD7 + + #define Z_SERIAL_TX_PIN PD4 + #define Z_SERIAL_RX_PIN PD4 + + #define E0_SERIAL_TX_PIN PD9 + #define E0_SERIAL_RX_PIN PD9 + + #define E1_SERIAL_TX_PIN PD8 + #define E1_SERIAL_RX_PIN PD8 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif // HAS_TMC_UART + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_1_PIN PC2 // TH2 +#define TEMP_BED_PIN PC0 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC3 // HEATER1 +#define HEATER_1_PIN PB0 // HEATER2 +#define HEATER_BED_PIN PA0 // HOT BED + +#define FAN_PIN PB1 // FAN + +// +// Thermocouples +// +//#define MAX6675_SS_PIN PE5 // TC1 - CS1 +//#define MAX6675_SS_PIN PE6 // TC2 - CS2 + +// +// Misc. Functions +// + +//#define MKSPWC +#ifdef MKSPWC + #define SUICIDE_PIN PB2 // Enable MKSPWC SUICIDE PIN + #define SUICIDE_PIN_INVERTING false // Enable MKSPWC PIN STATE + #define KILL_PIN PA2 // Enable MKSPWC DET PIN + #define KILL_PIN_STATE true // Enable MKSPWC PIN STATE +#endif + +#if HAS_TFT_LVGL_UI + // LVGL + #ifndef TOUCH_CALIBRATION_X + #define TOUCH_CALIBRATION_X -17253 + #endif + #ifndef TOUCH_CALIBRATION_Y + #define TOUCH_CALIBRATION_Y 11579 + #endif + #ifndef TOUCH_OFFSET_X + #define TOUCH_OFFSET_X 514 + #endif + #ifndef TOUCH_OFFSET_Y + #define TOUCH_OFFSET_Y -24 + #endif + #ifndef TOUCH_ORIENTATION + #define TOUCH_ORIENTATION TOUCH_LANDSCAPE + #endif + + #define MT_DET_1_PIN PA4 // LVGL UI FILAMENT RUNOUT1 PIN + #define MT_DET_2_PIN PE6 // LVGL UI FILAMENT RUNOUT2 PIN + #define MT_DET_PIN_INVERTING false // LVGL UI filament RUNOUT PIN STATE + + #define WIFI_IO0_PIN PC13 // MKS ESP WIFI IO0 PIN + #define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN + #define WIFI_RESET_PIN PE9 // MKS ESP WIFI RESET PIN + + #if ENABLED(MKS_TEST) + #define MKS_TEST_POWER_LOSS_PIN PA2 // PW_DET + #define MKS_TEST_PS_ON_PIN PB2 // PW_OFF + #endif +#else + //#define POWER_LOSS_PIN PA2 // PW_DET + //#define PS_ON_PIN PB2 // PW_OFF + #define FIL_RUNOUT_PIN PA4 + #define FIL_RUNOUT2_PIN PE6 +#endif + +//#define LED_PIN PB2 + +// +// SD Card +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(LCD) + #define ENABLE_SPI1 + #define SD_DETECT_PIN PE12 + #define SCK_PIN PA5 + #define MISO_PIN PA6 + #define MOSI_PIN PA7 + #define SS_PIN PE10 +#elif SD_CONNECTION_IS(ONBOARD) + #define SDIO_SUPPORT + #define SDIO_CLOCK 4500000 // 4.5 MHz + #define SD_DETECT_PIN PD12 + #define ONBOARD_SD_CS_PIN PC11 +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +// +// LCD / Controller +// +#ifndef BEEPER_PIN + #define BEEPER_PIN PC5 +#endif + +/** + * Note: MKS Robin TFT screens use various TFT controllers. + * If the screen stays white, disable 'LCD_RESET_PIN' + * to let the bootloader init the screen. + */ + +#if HAS_SPI_TFT + + // Shared SPI TFT + + #define LCD_BACKLIGHT_PIN PD13 + + #define TOUCH_CS_PIN PE14 // SPI1_NSS + #define TOUCH_SCK_PIN PA5 // SPI1_SCK + #define TOUCH_MISO_PIN PA6 // SPI1_MISO + #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 + #define BTN_ENC PE13 + + #define TFT_CS_PIN PD11 + #define TFT_SCK_PIN PA5 + #define TFT_MISO_PIN PA6 + #define TFT_MOSI_PIN PA7 + #define TFT_DC_PIN PD10 + #define TFT_RST_PIN PC6 + #define TFT_A0_PIN TFT_DC_PIN + + #define TFT_RESET_PIN PC6 + #define TFT_BACKLIGHT_PIN PD13 + + #define TOUCH_BUTTONS_HW_SPI + #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 + + #define LCD_USE_DMA_SPI + +#endif + +#if ENABLED(TFT_CLASSIC_UI) + // Emulated DOGM SPI + #define LCD_PINS_ENABLE PD13 + #define LCD_PINS_RS PC6 + #define BTN_ENC PE13 + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 +#elif ENABLED(TFT_COLOR_UI) + #define TFT_BUFFER_SIZE 14400 +#endif + +#if HAS_WIRED_LCD && !HAS_SPI_TFT + + // NON TFT Displays + + #if ENABLED(MKS_MINI_12864) + + // MKS MINI12864 and MKS LCD12864B + // If using MKS LCD12864A (Need to remove RPK2 resistor) + + #define BTN_ENC PE13 + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PD11 + #define DOGLCD_CS PE15 + #define DOGLCD_SCK PA5 + #define DOGLCD_MOSI PA7 + + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define PIN_SPI_SCK PA5 + #define PIN_TFT_MISO PA6 + #define PIN_TFT_MOSI PA7 + #define TFTGLCD_CS PE8 + #endif + + #ifndef BEEPER_PIN + #define BEEPER_PIN -1 + #endif + + #else // !MKS_MINI_12864 + + #define BTN_ENC PE13 + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 + + #define LCD_PINS_ENABLE PD13 + #define LCD_PINS_RS PC6 + #define LCD_PINS_D4 PE14 + #if IS_ULTIPANEL + #define LCD_PINS_D5 PE15 + #define LCD_PINS_D6 PD11 + #define LCD_PINS_D7 PD10 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) + #endif + + #endif // !MKS_MINI_12864 + +#endif // HAS_WIRED_LCD && !HAS_SPI_TFT + +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x1000000 // 16MB + #define W25QXX_CS_PIN PB12 + #define W25QXX_MOSI_PIN PB15 + #define W25QXX_MISO_PIN PB14 + #define W25QXX_SCK_PIN PB13 +#endif + +#ifndef BEEPER_PIN + #define BEEPER_PIN PC5 +#endif + +#if ENABLED(SPEAKER) && BEEPER_PIN == PC5 + #error "MKS Robin nano default BEEPER_PIN is not a SPEAKER." +#endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h new file mode 100644 index 0000000..39676bf --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -0,0 +1,280 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * MKS Robin pro (STM32F103ZET6) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 3 || E_STEPPERS > 3 + #error "MKS Robin pro supports up to 3 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "MKS Robin pro" + +#define BOARD_NO_NATIVE_USB + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +// +// Note: MKS Robin board is using SPI2 interface. +// +#define SPI_DEVICE 2 + +// +// Servos +// +#define SERVO0_PIN PA8 // Enable BLTOUCH + +// +// Limit Switches +// +#define X_MIN_PIN PA15 +#define X_MAX_PIN PG7 +#define Y_MIN_PIN PA12 +#define Y_MAX_PIN PG8 +#define Z_MIN_PIN PA11 +#define Z_MAX_PIN PC4 + +// +// Steppers +// +#define X_ENABLE_PIN PE4 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 +#ifndef X_CS_PIN + #define X_CS_PIN PF8 +#endif + +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PE0 +#define Y_DIR_PIN PB9 +#ifndef Y_CS_PIN + #define Y_CS_PIN PF3 +#endif + +#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB4 +#ifndef Z_CS_PIN + #define Z_CS_PIN PF6 +#endif + +#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PD6 +#define E0_DIR_PIN PD3 +#ifndef E0_CS_PIN + #define E0_CS_PIN PG15 +#endif + +#define E1_ENABLE_PIN PA3 +#define E1_STEP_PIN PA6 +#define E1_DIR_PIN PA1 +#ifndef E1_CS_PIN + #define E1_CS_PIN PG10 +#endif + +#define E2_ENABLE_PIN PF0 +#define E2_STEP_PIN PF2 +#define E2_DIR_PIN PF1 +#ifndef E2_CS_PIN + #define E2_CS_PIN PG9 +#endif +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PB15 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB14 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB13 + #endif +#endif + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL MSerial1 + //#define Y_HARDWARE_SERIAL MSerial1 + //#define Z_HARDWARE_SERIAL MSerial1 + //#define E0_HARDWARE_SERIAL MSerial1 + //#define E1_HARDWARE_SERIAL MSerial1 + //#define E2_HARDWARE_SERIAL MSerial1 + + // + // Software serial + // + #define X_SERIAL_TX_PIN PF7 + #define X_SERIAL_RX_PIN PF8 + + #define Y_SERIAL_TX_PIN PF4 + #define Y_SERIAL_RX_PIN PF3 + + #define Z_SERIAL_TX_PIN PF5 + #define Z_SERIAL_RX_PIN PF6 + + #define E0_SERIAL_TX_PIN PG13 + #define E0_SERIAL_RX_PIN PG15 + + #define E1_SERIAL_TX_PIN PG12 + #define E1_SERIAL_RX_PIN PG10 + + #define E2_SERIAL_TX_PIN PC13 + #define E2_SERIAL_RX_PIN PG9 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_1_PIN PC2 // TH2 +#define TEMP_2_PIN PC3 // TH3 +#define TEMP_BED_PIN PC0 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PF10 // +HE0- +#define HEATER_1_PIN PB0 // +HE1- +#define HEATER_2_PIN PF9 // +HE2- +#define HEATER_BED_PIN PA0 // +HOT-BED- +#define FAN_PIN PB1 // +FAN- + +/** + * Note: MKS Robin Pro board is using SPI2 interface. Make sure your stm32duino library is configured accordingly + */ +//#define MAX6675_SS_PIN PE5 // TC1 - CS1 +//#define MAX6675_SS_PIN PF11 // TC2 - CS2 + +#define POWER_LOSS_PIN PA2 // PW_DET +#define PS_ON_PIN PG11 // PW_OFF +#define FIL_RUNOUT_PIN PA4 // MT_DET1 +//#define FIL_RUNOUT_PIN PE6 // MT_DET2 +//#define FIL_RUNOUT_PIN PG14 // MT_DET3 + +// +// SD Card +// +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN PG3 + #define SD_SCK_PIN PB13 + #define SD_MISO_PIN PB14 + #define SD_MOSI_PIN PB15 + #define SD_SS_PIN PG6 +#elif SD_CONNECTION_IS(ONBOARD) + #define SDIO_SUPPORT + #define SD_DETECT_PIN PD12 + #define ONBOARD_SD_CS_PIN PC11 +#elif SD_CONNECTION_IS(CUSTOM_CABLE) + #error "No custom SD drive cable defined for this board." +#endif + +/** + * Note: MKS Robin TFT screens use various TFT controllers. + * If the screen stays white, disable 'LCD_RESET_PIN' + * to let the bootloader init the screen. + */ +#if HAS_FSMC_GRAPHICAL_TFT + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PD11 // A0 + + #define LCD_RESET_PIN PF6 + #define LCD_BACKLIGHT_PIN PD13 + + #if NEED_TOUCH_PINS + #define TOUCH_CS_PIN PA7 + #else + #define BEEPER_PIN PC5 + #define BTN_ENC PG2 + #define BTN_EN1 PG5 + #define BTN_EN2 PG4 + #endif + +#elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS PG5 + #endif + +#elif HAS_WIRED_LCD + + #define BEEPER_PIN PC5 + #define BTN_ENC PG2 + #define LCD_PINS_ENABLE PG0 + #define LCD_PINS_RS PG1 + #define BTN_EN1 PG5 + #define BTN_EN2 PG4 + + // MKS MINI12864 and MKS LCD12864B. If using MKS LCD12864A (Need to remove RPK2 resistor) + #if ENABLED(MKS_MINI_12864) + + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PF12 + #define DOGLCD_CS PF15 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 + + #else // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY + + #define LCD_PINS_D4 PF14 + #if IS_ULTIPANEL + #define LCD_PINS_D5 PF15 + #define LCD_PINS_D6 PF12 + #define LCD_PINS_D7 PF13 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #endif // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY + +#endif + +#ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(125) +#endif +#ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(125) +#endif +#ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(125) +#endif diff --git a/Marlin/src/pins/stm32f1/pins_MORPHEUS.h b/Marlin/src/pins/stm32f1/pins_MORPHEUS.h new file mode 100644 index 0000000..05e02c9 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_MORPHEUS.h @@ -0,0 +1,93 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + + /** + * 2017 Victor Perez Marlin for stm32f1 test + * 2018 Modified by Pablo Crespo for Morpheus Board (https://github.com/pscrespo/Morpheus-STM32) + */ + +/** + * MORPHEUS Board pin assignments + */ + +#if NOT_TARGET(__STM32F1__, STM32F1xx) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Bluepill based board" + +// +// Limit Switches +// +#define X_MIN_PIN PB14 +#define Y_MIN_PIN PB13 +#define Z_MIN_PIN PB12 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN PB9 +#endif + +// +// Steppers +// +// X & Y enable are the same +#define X_STEP_PIN PB7 +#define X_DIR_PIN PB6 +#define X_ENABLE_PIN PB8 + +#define Y_STEP_PIN PB5 +#define Y_DIR_PIN PB4 +#define Y_ENABLE_PIN PB8 + +#define Z_STEP_PIN PA15 +#define Z_DIR_PIN PA10 +#define Z_ENABLE_PIN PB3 + +#define E0_STEP_PIN PA8 +#define E0_DIR_PIN PB15 +#define E0_ENABLE_PIN PA9 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PB1 // Analog Input (HOTEND thermistor) +#define TEMP_BED_PIN PB0 // Analog Input (BED thermistor) + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA2 // HOTEND MOSFET +#define HEATER_BED_PIN PA0 // BED MOSFET + +#define FAN_PIN PA1 // FAN1 header on board - PRINT FAN + +// +// Misc. +// +#define LED_PIN PC13 +#define SDSS PA3 +#define TFTGLCD_CS PA4 +#define SD_DETECT_PIN PC14 diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h new file mode 100644 index 0000000..d666755 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h @@ -0,0 +1,140 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 21017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "Misc. STM32F1R" +#define DEFAULT_MACHINE_NAME "STM32F103RET6" + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Limit Switches +// +#define X_STOP_PIN PB3 +#define Y_STOP_PIN PB4 +#define Z_STOP_PIN PB5 + +// +// Steppers +// +#define X_STEP_PIN PC0 +#define X_DIR_PIN PC1 +#define X_ENABLE_PIN PA8 + +#define Y_STEP_PIN PC2 +#define Y_DIR_PIN PC3 +#define Y_ENABLE_PIN PA8 + +#define Z_STEP_PIN PC4 +#define Z_DIR_PIN PC5 +#define Z_ENABLE_PIN PA8 + +#define E0_STEP_PIN PC6 +#define E0_DIR_PIN PC7 +#define E0_ENABLE_PIN PA8 + +/** + * TODO: Currently using same Enable pin to all steppers. + */ + +#define E1_STEP_PIN PC8 +#define E1_DIR_PIN PC9 +#define E1_ENABLE_PIN PA8 + +#define E2_STEP_PIN PC10 +#define E2_DIR_PIN PC11 +#define E2_ENABLE_PIN PA8 + +// +// Misc. Functions +// +#define SDSS PA4 +#define LED_PIN PD2 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PB0 // EXTRUDER 1 +#define HEATER_1_PIN PB1 + +#define HEATER_BED_PIN PA3 // BED + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_1_PIN PA2 // Analog Input + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #else + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 + #if !IS_NEWPANEL + #error "Non-NEWPANEL LCD is not supported." + #endif + #endif + + #if IS_NEWPANEL + #if IS_RRD_SC + #error "RRD Smart Controller is not supported." + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #elif ENABLED(LCD_I2C_PANELOLU2) + #error "LCD_I2C_PANELOLU2 is not supported." + #elif ENABLED(LCD_I2C_VIKI) + #error "LCD_I2C_VIKI is not supported." + #elif ANY(VIKI2, miniVIKI) + #error "VIKI2 / miniVIKI is not supported." + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported." + #elif ENABLED(MINIPANEL) + #error "MINIPANEL is not supported." + #else + #error "Other generic NEWPANEL LCD is not supported." + #endif + #endif + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h new file mode 100644 index 0000000..4f8183c --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h @@ -0,0 +1,161 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 21017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "STM3R Mini" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +// Enable I2C_EEPROM for testing +#define I2C_EEPROM + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Limit Switches +// +#define X_STOP_PIN PD0 +#define Y_STOP_PIN PD1 +#define Z_STOP_PIN PD4 + +// +// Steppers +// +#define X_STEP_PIN PE1 +#define X_DIR_PIN PE0 +#define X_ENABLE_PIN PC0 + +#define Y_STEP_PIN PE3 +#define Y_DIR_PIN PE2 +#define Y_ENABLE_PIN PC1 + +#define Z_STEP_PIN PE5 +#define Z_DIR_PIN PE4 +#define Z_ENABLE_PIN PC2 + +#define E0_STEP_PIN PE7 +#define E0_DIR_PIN PE6 +#define E0_ENABLE_PIN PC3 + +#define E1_STEP_PIN PE9 +#define E1_DIR_PIN PE8 +#define E1_ENABLE_PIN PC4 + +#define E2_STEP_PIN PE11 +#define E2_DIR_PIN PE10 +#define E2_ENABLE_PIN PC5 + +// +// Misc. Functions +// +#define SDSS PA15 +#define LED_PIN PB2 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PD12 // EXTRUDER 1 +//#define HEATER_1_PIN PD13 + +#define HEATER_BED_PIN PB9 // BED +//#define HEATER_BED2_PIN -1 // BED2 +//#define HEATER_BED3_PIN -1 // BED3 + +#ifndef FAN_PIN + #define FAN_PIN PD14 +#endif +#define FAN1_PIN PD13 + +#define FAN_SOFT_PWM + +// +// Temperature Sensors +// +#define TEMP_BED_PIN PA0 +#define TEMP_0_PIN PA1 +#define TEMP_1_PIN PA2 +#define TEMP_2_PIN PA3 + +// Laser control +#if HAS_CUTTER + #define SPINDLE_LASER_PWM_PIN PB8 + #define SPINDLE_LASER_ENA_PIN PD5 +#endif + +// +// LCD Pins +// +#if HAS_WIRED_LCD + + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #else + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 + #if !IS_NEWPANEL + #error "Non-NEWPANEL LCD is not supported." + #endif + #endif + + #if NEED_TOUCH_PINS + + #define TOUCH_CS_PIN PB12 // SPI2_NSS + #define TOUCH_SCK_PIN PB13 + #define TOUCH_MOSI_PIN PB14 + #define TOUCH_MISO_PIN PB15 + #define TOUCH_INT_PIN PC6 // (PenIRQ coming from ADS7843) + + #elif IS_NEWPANEL + + #if IS_RRD_SC + #error "RRD Smart Controller is not supported." + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + #error "REPRAPWORLD_GRAPHICAL_LCD is not supported." + #elif ENABLED(LCD_I2C_PANELOLU2) + #error "LCD_I2C_PANELOLU2 is not supported." + #elif ENABLED(LCD_I2C_VIKI) + #error "LCD_I2C_VIKI is not supported." + #elif ANY(VIKI2, miniVIKI) + #error "VIKI2 / miniVIKI is not supported." + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #error "ELB_FULL_GRAPHIC_CONTROLLER is not supported." + #elif ENABLED(MINIPANEL) + #error "MINIPANEL is not supported." + #else + #error "Other generic NEWPANEL LCD is not supported." + #endif + + #endif + +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h new file mode 100644 index 0000000..e09bbff --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h @@ -0,0 +1,183 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * ANYCUBIC Trigorilla Pro (STM32F130ZET6) board pin assignments. + * It is the same used by the Tronxy X5SA thanks to ftoz1 for sharing it + * https://github.com/MarlinFirmware/Marlin/issues/14655 + * https://github.com/MarlinFirmware/Marlin/files/3401484/x5sa-main_board-2.pdf + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "Trigorilla Pro supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Trigorilla Pro" + +#define BOARD_NO_NATIVE_USB + +#define DISABLE_JTAG + +// +// EEPROM +// +#define FLASH_EEPROM_EMULATION +#if ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE +#else + #define MARLIN_EEPROM_SIZE (0x800U) // On SD, Limit to 2KB, require this amount of RAM +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PG10 +#define Y_STOP_PIN PA12 +#define Z_MAX_PIN PA14 +#define Z_MIN_PIN PA13 + +// +// Steppers +// +#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 + +#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 + +#define Z_ENABLE_PIN PE1 +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 + +#define E0_ENABLE_PIN PB8 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 + +#define E1_ENABLE_PIN PG8 +#define E1_STEP_PIN PC7 +#define E1_DIR_PIN PC6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA1 // TH1 +#define TEMP_BED_PIN PA0 // TB1 + +// +// Heaters +// +#define HEATER_0_PIN PG12 // HEATER1 +#define HEATER_BED_PIN PG11 // HOT BED +#define HEATER_BED_INVERTING true + +// +// Fans +// +#define CONTROLLER_FAN_PIN PD6 // FAN +#define FAN_PIN PG13 // FAN +#define FAN1_PIN PG14 // FAN + +// +// Misc +// +#define BEEPER_PIN PB0 +#define LED_PIN PD3 +//#define POWER_LOSS_PIN PG2 // PG4 PW_DET +#define FIL_RUNOUT_PIN PA15 // MT_DET + +/** + * Note: MKS Robin TFT screens use various TFT controllers + * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240) + * ILI9488 is not supported. + * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp + * + * If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader init the screen. + * + * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu + * because Marlin uses the reset as a failsafe to revive a glitchy LCD. + */ +#if HAS_FSMC_TFT + #define TFT_RESET_PIN PF11 + #define TFT_BACKLIGHT_PIN PD13 + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PD11 // A0 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + + #define ANYCUBIC_TFT35 +#else + #define LCD_RESET_PIN PF11 + #define LCD_BACKLIGHT_PIN PD13 +#endif + +// XPT2046 Touch Screen calibration +#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) + #ifndef TOUCH_CALIBRATION_X + #define TOUCH_CALIBRATION_X -17181 + #endif + #ifndef TOUCH_CALIBRATION_Y + #define TOUCH_CALIBRATION_Y 11434 + #endif + #ifndef TOUCH_OFFSET_X + #define TOUCH_OFFSET_X 501 + #endif + #ifndef TOUCH_OFFSET_Y + #define TOUCH_OFFSET_Y -9 + #endif +#endif + +#if NEED_TOUCH_PINS + #define TOUCH_CS_PIN PB7 // SPI2_NSS + #define TOUCH_SCK_PIN PA5 // SPI2_SCK + #define TOUCH_MISO_PIN PA6 // SPI2_MISO + #define TOUCH_MOSI_PIN PA7 // SPI2_MOSI +#endif + +// SPI1(PA7) & SPI3(PB5) not available +#define SPI_DEVICE 2 + +#if ENABLED(SDIO_SUPPORT) + #define SD_SCK_PIN PB13 // SPI2 ok + #define SD_MISO_PIN PB14 // SPI2 ok + #define SD_MOSI_PIN PB15 // SPI2 ok + #define SD_SS_PIN PC11 // PB12 is X- ok + #define SD_DETECT_PIN -1 // SD_CD ok +#else + // SD as custom software SPI (SDIO pins) + #define SD_SCK_PIN PC12 + #define SD_MISO_PIN PC8 + #define SD_MOSI_PIN PD2 + #define SD_SS_PIN -1 + #define ONBOARD_SD_CS_PIN PC11 + #define SDSS PD2 + #define SD_DETECT_PIN -1 +#endif diff --git a/Marlin/src/pins/stm32f1/workspace.code-workspace b/Marlin/src/pins/stm32f1/workspace.code-workspace new file mode 100644 index 0000000..b28d485 --- /dev/null +++ b/Marlin/src/pins/stm32f1/workspace.code-workspace @@ -0,0 +1,8 @@ +{ + "folders": [ + { + "path": "..\\..\\..\\..\\.." + } + ], + "settings": {} +}
\ No newline at end of file |