Initial commit

1 files changed, 194 insertions, 0 deletions

diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
new file mode 100644
index 0000000..c978092
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
@@ -0,0 +1,194 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(__STM32F1__)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+#define DEFAULT_MACHINE_NAME "3D Printer"
+
+#define BOARD_INFO_NAME   "FYSETC Cheetah"
+#define BOARD_WEBSITE_URL "fysetc.com"
+
+// Ignore temp readings during development.
+//#define BOGUS_TEMPERATURE_GRACE_PERIOD    2000
+
+#define BOARD_NO_NATIVE_USB
+
+#define DISABLE_JTAG
+
+#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
+  #define FLASH_EEPROM_EMULATION
+  #define EEPROM_PAGE_SIZE     (0x800U)           // 2KB
+  #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
+  #define MARLIN_EEPROM_SIZE    EEPROM_PAGE_SIZE  // 2KB
+#endif
+
+//
+// Servos
+//
+#define SERVO0_PIN                          PA0
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                          PA1
+#define Y_STOP_PIN                          PB4
+#define Z_STOP_PIN                          PA15
+
+//
+// Filament runout
+//
+#define FIL_RUNOUT_PIN                      PB5
+
+//
+// Steppers
+//
+#define X_STEP_PIN                          PB8
+#define X_DIR_PIN                           PB9
+#define X_ENABLE_PIN                        PA8
+
+#define Y_STEP_PIN                          PB2
+#define Y_DIR_PIN                           PB3
+#define Y_ENABLE_PIN                        PB1
+
+#define Z_STEP_PIN                          PC0
+#define Z_DIR_PIN                           PC1
+#define Z_ENABLE_PIN                        PC2
+
+#define E0_STEP_PIN                         PC15
+#define E0_DIR_PIN                          PC14
+#define E0_ENABLE_PIN                       PC13
+
+#if HAS_TMC_UART
+  #define X_HARDWARE_SERIAL  MSerial2
+  #define Y_HARDWARE_SERIAL  MSerial2
+  #define Z_HARDWARE_SERIAL  MSerial2
+  #define E0_HARDWARE_SERIAL MSerial2
+
+  // Default TMC slave addresses
+  #ifndef X_SLAVE_ADDRESS
+    #define X_SLAVE_ADDRESS  0
+  #endif
+  #ifndef Y_SLAVE_ADDRESS
+    #define Y_SLAVE_ADDRESS  1
+  #endif
+  #ifndef Z_SLAVE_ADDRESS
+    #define Z_SLAVE_ADDRESS  2
+  #endif
+  #ifndef E0_SLAVE_ADDRESS
+    #define E0_SLAVE_ADDRESS 3
+  #endif
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PC6
+#define HEATER_BED_PIN                      PC7
+#ifndef FAN_PIN
+  #define FAN_PIN                           PC8
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN                        PC5   // Analog Input
+#define TEMP_0_PIN                          PC4   // Analog Input
+
+//
+// Misc. Functions
+//
+#define SDSS                                PA4
+#define SD_DETECT_PIN                       PC3
+
+#ifndef RGB_LED_R_PIN
+  #define RGB_LED_R_PIN                     PB0
+#endif
+#ifndef RGB_LED_G_PIN
+  #define RGB_LED_G_PIN                     PB7
+#endif
+#ifndef RGB_LED_B_PIN
+  #define RGB_LED_B_PIN                     PB6
+#endif
+
+/*
+* EXP1 pinout for the LCD according to Fysetcs schematic for the Cheetah board
+*                 _____
+*  (Beeper) PC9  | 1 2 | PC12 (BTN_ENC)
+* (BTN_EN2) PC11 | 3 4 | PB14 (LCD_RS / MISO)
+* (BTN_EN1) PC10   5 6 | PB13 (SCK)
+*  (LCD_EN) PB12 | 7 8 | PB15 (MOSI)
+*            GND | 9 10| 5V
+*                 -----
+*                 EXP1
+* Note: The pin-numbers match the connector correctly and are not in reverse order like on the Ender-3 board.
+* Note: Functionally the pins are assigned in the same order as on the Ender-3 board.
+* Note: Pin 4 on the Cheetah board is assigned to an I/O, it is assigned to RESET on the Ender-3 board.
+*/
+
+#if HAS_WIRED_LCD
+  #define BEEPER_PIN                        PC9
+
+  #if HAS_MARLINUI_U8GLIB
+    #define DOGLCD_A0                       PB14
+    #define DOGLCD_CS                       PB12
+    #define DOGLCD_SCK                      PB13
+    #define DOGLCD_MOSI                     PB15
+    //#define LCD_SCREEN_ROT_90
+    //#define LCD_SCREEN_ROT_180
+    //#define LCD_SCREEN_ROT_270
+
+    #if EITHER(FYSETC_MINI_12864, U8GLIB_ST7920)
+      #define FORCE_SOFT_SPI
+    #endif
+  #endif
+
+  #define LCD_PINS_RS                       PB12  // CS -- SOFT SPI for ENDER3 LCD
+  #define LCD_PINS_D4                       PB13  // SCLK
+  #define LCD_PINS_ENABLE                   PB15  // DATA MOSI
+
+  //#define LCD_CONTRAST_INIT                190
+
+  #if IS_NEWPANEL
+    #define BTN_EN1                         PC10
+    #define BTN_EN2                         PC11
+    #define BTN_ENC                         PC12
+  #endif
+#endif
+
+#if ENABLED(TOUCH_UI_FTDI_EVE)
+  #define BEEPER_PIN                        PC9
+  #define CLCD_MOD_RESET                    PC11
+  #define CLCD_SPI_CS                       PB12
+
+  //#define CLCD_USE_SOFT_SPI                     // the Cheetah can use hardware-SPI so we do not really need this
+
+  #if ENABLED(CLCD_USE_SOFT_SPI)
+    #define CLCD_SOFT_SPI_MOSI              PB15
+    #define CLCD_SOFT_SPI_MISO              PB14
+    #define CLCD_SOFT_SPI_SCLK              PB13
+  #else
+    #define CLCD_SPI_BUS                       2
+  #endif
+#endif