diff options
| author | Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> | 2021-03-04 20:54:23 +0300 |
|---|---|---|
| committer | Georgiy Bondarenko <69736697+nehilo@users.noreply.github.com> | 2021-03-04 20:54:23 +0300 |
| commit | e8701195e66f2d27ffe17fb514eae8173795aaf7 (patch) | |
| tree | 9f519c4abf6556b9ae7190a6210d87ead1dfadde /Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h | |
| download | kp3s-lgvl-e8701195e66f2d27ffe17fb514eae8173795aaf7.tar.xz kp3s-lgvl-e8701195e66f2d27ffe17fb514eae8173795aaf7.zip | |
Initial commit
Diffstat (limited to 'Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h')
| -rw-r--r-- | Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h new file mode 100644 index 0000000..65b1675 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h @@ -0,0 +1,64 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +#include "pins_FYSETC_CHEETAH.h" + +#undef X_HARDWARE_SERIAL +#undef Y_HARDWARE_SERIAL +#undef Z_HARDWARE_SERIAL +#undef E0_HARDWARE_SERIAL + +#undef RGB_LED_R_PIN +#undef RGB_LED_G_PIN +#undef RGB_LED_B_PIN + +#define FAN1_PIN PB0 // Fan1 + +#if HAS_TMC_UART + + /** + * TMC2208/TMC2209 stepper drivers + */ + + // + // Software serial + // + #define X_SERIAL_TX_PIN PA11 + #define X_SERIAL_RX_PIN PA12 + + #define Y_SERIAL_TX_PIN PB6 + #define Y_SERIAL_RX_PIN PB7 + + #define Z_SERIAL_TX_PIN PB10 + #define Z_SERIAL_RX_PIN PB11 + + #define E0_SERIAL_TX_PIN PA2 + #define E0_SERIAL_RX_PIN PA3 + + // Reduce baud rate to improve software serial reliability + #define TMC_BAUD_RATE 19200 +#endif |