Initial commit

1 files changed, 95 insertions, 0 deletions

diff --git a/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h b/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h
new file mode 100644
index 0000000..e33e029
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h
@@ -0,0 +1,95 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * MALYAN M200 pin assignments
+ */
+
+#if NOT_TARGET(__STM32F1__, STM32F1xx, STM32F0xx)
+  #error "Oops! Select an STM32 board in your IDE."
+#endif
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "Malyan M200"
+#endif
+
+// Prevents hanging from an extra watchdog init
+#define DISABLE_WATCHDOG_INIT
+
+// Assume Flash EEPROM
+#if NO_EEPROM_SELECTED
+  #define FLASH_EEPROM_EMULATION
+#endif
+
+#define SDSS                           SD_SS_PIN
+
+// Based on PWM timer usage, we have to use these timers and soft PWM for the fans
+// On STM32F103:
+// PB3, PB6, PB7, and PB8 can be used with pwm, which rules out TIM2 and TIM4.
+// On STM32F070, 16 and 17 are in use, but 1 and 3 are available.
+#define STEP_TIMER                             1
+#define TEMP_TIMER                             3
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                           PB4
+#define Y_MIN_PIN                           PA15
+#define Z_MIN_PIN                           PB5
+
+//
+// Steppers
+//
+// X & Y enable are the same
+#define X_STEP_PIN                          PB14
+#define X_DIR_PIN                           PB15
+#define X_ENABLE_PIN                        PA8
+
+#define Y_STEP_PIN                          PB12
+#define Y_DIR_PIN                           PB13
+#define Y_ENABLE_PIN                        PA8
+
+#define Z_STEP_PIN                          PB10
+#define Z_DIR_PIN                           PB2
+#define Z_ENABLE_PIN                        PB11
+
+#define E0_STEP_PIN                         PB0
+#define E0_DIR_PIN                          PC13
+#define E0_ENABLE_PIN                       PB1
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                          PA0   // Analog Input (HOTEND0 thermistor)
+#define TEMP_BED_PIN                        PA1   // Analog Input (BED thermistor)
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PB6   // HOTEND0 MOSFET
+#define HEATER_BED_PIN                      PB7   // BED MOSFET
+
+#define MALYAN_FAN1_PIN                     PB8   // FAN1 header on board - PRINT FAN
+#define MALYAN_FAN2_PIN                     PB3   // FAN2 header on board - CONTROLLER FAN
+
+#define FAN1_PIN                 MALYAN_FAN2_PIN