Initial commit

1 files changed, 296 insertions, 0 deletions

diff --git a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h
new file mode 100644
index 0000000..7965d26
--- /dev/null
+++ b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h
@@ -0,0 +1,296 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(STM32F4, STM32F4xx)
+  #error "Oops! Select an STM32F4 board in 'Tools > Board.'"
+#elif HOTENDS > 6 || E_STEPPERS > 6
+  #error "FLYF407ZG supports up to 6 hotends / E-steppers."
+#endif
+
+#define BOARD_INFO_NAME      "FLYF407ZG"
+#define BOARD_WEBSITE_URL    "github.com/FLYmaker/FLYF407ZG"
+#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
+
+// Avoid conflict with fans and TIMER_TONE
+#define TEMP_TIMER 3
+#define STEP_TIMER 5
+
+//
+// EEPROM Emulation
+//
+#if NO_EEPROM_SELECTED
+  #define FLASH_EEPROM_EMULATION
+  //#define SRAM_EEPROM_EMULATION
+  //#define I2C_EEPROM
+#endif
+
+#if ENABLED(FLASH_EEPROM_EMULATION)
+  // Decrease delays and flash wear by spreading writes across
+  // the 128kB sector allocated for EEPROM emulation.
+  #define FLASH_EEPROM_LEVELING
+#elif ENABLED(I2C_EEPROM)
+  #define MARLIN_EEPROM_SIZE              0x2000  // 8KB
+#endif
+
+#ifndef MARLIN_EEPROM_SIZE
+  #define MARLIN_EEPROM_SIZE              0x1000  // 4KB
+#endif
+
+//
+// Servos
+//
+#define SERVO0_PIN                          PE11
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                           PC3
+#define X_MAX_PIN                           PC2
+#define Y_MIN_PIN                           PF2
+#define Y_MAX_PIN                           PF1
+#define Z_MIN_PIN                           PF0
+#define Z_MAX_PIN                           PC15
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#define Z_MIN_PROBE_PIN                     PC14  // Z3_PIN
+
+//
+// Steppers
+//
+
+#define X_STEP_PIN                          PB9
+#define X_DIR_PIN                           PE0
+#define X_ENABLE_PIN                        PE1
+#ifndef X_CS_PIN
+  #define X_CS_PIN                          PG13
+#endif
+
+#define Y_STEP_PIN                          PB8
+#define Y_DIR_PIN                           PG11
+#define Y_ENABLE_PIN                        PG12
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                          PG10
+#endif
+
+#define Z_STEP_PIN                          PA8
+#define Z_DIR_PIN                           PD6
+#define Z_ENABLE_PIN                        PD7
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                          PD5
+#endif
+
+#define E0_STEP_PIN                         PC7
+#define E0_DIR_PIN                          PD3
+#define E0_ENABLE_PIN                       PD4
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                         PD1
+#endif
+
+#define E1_STEP_PIN                         PC6
+#define E1_DIR_PIN                          PA15
+#define E1_ENABLE_PIN                       PD0
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN                         PA14
+#endif
+
+#define E2_STEP_PIN                         PD15
+#define E2_DIR_PIN                          PG7
+#define E2_ENABLE_PIN                       PG8
+#ifndef E2_CS_PIN
+  #define E2_CS_PIN                         PG6
+#endif
+
+#define E3_STEP_PIN                         PD14
+#define E3_DIR_PIN                          PG4
+#define E3_ENABLE_PIN                       PG5
+#ifndef E3_CS_PIN
+  #define E3_CS_PIN                         PG3
+#endif
+
+#define E4_STEP_PIN                         PD13
+#define E4_DIR_PIN                          PD11
+#define E4_ENABLE_PIN                       PG2
+#ifndef E4_CS_PIN
+  #define E4_CS_PIN                         PD10
+#endif
+
+#define E5_STEP_PIN                         PD12
+#define E5_DIR_PIN                          PD8
+#define E5_ENABLE_PIN                       PD9
+#ifndef E5_CS_PIN
+  #define E5_CS_PIN                         PB12
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                          PA0   // Analog Input
+#define TEMP_1_PIN                          PC1   // Analog Input
+#define TEMP_2_PIN                          PC0   // Analog Input
+#define TEMP_3_PIN                          PF10  // Analog Input
+#define TEMP_4_PIN                          PF5   // Analog Input
+#define TEMP_5_PIN                          PF4   // Analog Input
+#define TEMP_BED_PIN                        PF3   // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PF7
+#define HEATER_1_PIN                        PF6
+#define HEATER_2_PIN                        PE6
+#define HEATER_3_PIN                        PE5
+#define HEATER_4_PIN                        PE4
+#define HEATER_5_PIN                        PE3
+#define HEATER_BED_PIN                      PE2
+
+#ifndef FAN_PIN
+  #define FAN_PIN                           PF8
+#endif
+#define FAN1_PIN                            PF9
+#define FAN2_PIN                            PA2
+#define FAN3_PIN                            PA1
+#define FAN4_PIN                            PE13
+#define FAN5_PIN                            PB11
+
+//
+// Onboard SD support
+//
+
+#define SDIO_D0_PIN                         PC8
+#define SDIO_D1_PIN                         PC9
+//#define SD_CARD_DETECT_PIN                PC13
+#define SDIO_D2_PIN                         PC10
+#define SDIO_D3_PIN                         PC11
+#define SDIO_CK_PIN                         PC12
+#define SDIO_CMD_PIN                        PD2
+
+#ifndef SDCARD_CONNECTION
+  #define SDCARD_CONNECTION              ONBOARD
+#endif
+
+#if SD_CONNECTION_IS(ONBOARD)
+
+  #define SDIO_SUPPORT                            // Use SDIO for onboard SD
+  #ifndef SDIO_SUPPORT
+    #define SOFTWARE_SPI                          // Use soft SPI for onboard SD
+    #define SDSS                     SDIO_D3_PIN
+    #define SD_SCK_PIN               SDIO_CK_PIN
+    #define SD_MISO_PIN              SDIO_D0_PIN
+    #define SD_MOSI_PIN             SDIO_CMD_PIN
+  #endif
+
+#elif SD_CONNECTION_IS(LCD)
+
+  #define SD_SCK_PIN                        PB13
+  #define SD_MISO_PIN                       PB14
+  #define SD_MOSI_PIN                       PB15
+  #define SDSS                              PF11
+  #define SD_DETECT_PIN                     PB2
+
+#endif
+
+//
+// Trinamic Software SPI
+//
+
+#if ENABLED(TMC_USE_SW_SPI)
+  #ifndef TMC_SW_MOSI
+    #define TMC_SW_MOSI                     PB15
+  #endif
+  #ifndef TMC_SW_MISO
+    #define TMC_SW_MISO                     PB14
+  #endif
+  #ifndef TMC_SW_SCK
+    #define TMC_SW_SCK                      PB13
+  #endif
+#endif
+
+//
+// Trinamic Software Serial
+//
+
+#if HAS_TMC_UART
+  #define X_SERIAL_TX_PIN                   PG13
+  #define X_SERIAL_RX_PIN                   PG13
+
+  #define Y_SERIAL_TX_PIN                   PG10
+  #define Y_SERIAL_RX_PIN                   PG10
+
+  #define Z_SERIAL_TX_PIN                   PD5
+  #define Z_SERIAL_RX_PIN                   PD5
+
+  #define E0_SERIAL_TX_PIN                  PD1
+  #define E0_SERIAL_RX_PIN                  PD1
+
+  #define E1_SERIAL_TX_PIN                  PA14
+  #define E1_SERIAL_RX_PIN                  PA14
+
+  #define E2_SERIAL_TX_PIN                  PG6
+  #define E2_SERIAL_RX_PIN                  PG6
+
+  #define E3_SERIAL_TX_PIN                  PG3
+  #define E3_SERIAL_RX_PIN                  PG3
+
+  #define E4_SERIAL_TX_PIN                  PD10
+  #define E4_SERIAL_RX_PIN                  PD10
+
+  #define E5_SERIAL_TX_PIN                  PB12
+  #define E5_SERIAL_RX_PIN                  PB12
+
+#endif
+
+//
+// LCD / Controller
+//
+
+#define BEEPER_PIN                          PB10
+#define LCD_PINS_RS                         PE12
+#define LCD_PINS_ENABLE                     PE14
+#define LCD_PINS_D4                         PE10
+#define LCD_PINS_D5                         PE9
+#define LCD_PINS_D6                         PE8
+#define LCD_PINS_D7                         PE7
+#define BTN_EN1                             PC4
+#define BTN_EN2                             PC5
+#define BTN_ENC                             PE15
+
+//
+// Filament runout
+//
+
+#define FIL_RUNOUT_PIN                      PA3
+
+//
+// ST7920 Delays
+//
+#ifndef BOARD_ST7920_DELAY_1
+  #define BOARD_ST7920_DELAY_1      DELAY_NS(96)
+#endif
+#ifndef BOARD_ST7920_DELAY_2
+  #define BOARD_ST7920_DELAY_2      DELAY_NS(48)
+#endif
+#ifndef BOARD_ST7920_DELAY_3
+  #define BOARD_ST7920_DELAY_3     DELAY_NS(715)
+#endif