diff options
Diffstat (limited to 'Marlin/src/pins/stm32f4/pins_FLYF407ZG.h')
| -rw-r--r-- | Marlin/src/pins/stm32f4/pins_FLYF407ZG.h | 296 |
1 files changed, 296 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h new file mode 100644 index 0000000..7965d26 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h @@ -0,0 +1,296 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(STM32F4, STM32F4xx) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 6 || E_STEPPERS > 6 + #error "FLYF407ZG supports up to 6 hotends / E-steppers." +#endif + +#define BOARD_INFO_NAME "FLYF407ZG" +#define BOARD_WEBSITE_URL "github.com/FLYmaker/FLYF407ZG" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +// Avoid conflict with fans and TIMER_TONE +#define TEMP_TIMER 3 +#define STEP_TIMER 5 + +// +// EEPROM Emulation +// +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION + //#define SRAM_EEPROM_EMULATION + //#define I2C_EEPROM +#endif + +#if ENABLED(FLASH_EEPROM_EMULATION) + // Decrease delays and flash wear by spreading writes across + // the 128kB sector allocated for EEPROM emulation. + #define FLASH_EEPROM_LEVELING +#elif ENABLED(I2C_EEPROM) + #define MARLIN_EEPROM_SIZE 0x2000 // 8KB +#endif + +#ifndef MARLIN_EEPROM_SIZE + #define MARLIN_EEPROM_SIZE 0x1000 // 4KB +#endif + +// +// Servos +// +#define SERVO0_PIN PE11 + +// +// Limit Switches +// +#define X_MIN_PIN PC3 +#define X_MAX_PIN PC2 +#define Y_MIN_PIN PF2 +#define Y_MAX_PIN PF1 +#define Z_MIN_PIN PF0 +#define Z_MAX_PIN PC15 + +// +// Z Probe (when not Z_MIN_PIN) +// +#define Z_MIN_PROBE_PIN PC14 // Z3_PIN + +// +// Steppers +// + +#define X_STEP_PIN PB9 +#define X_DIR_PIN PE0 +#define X_ENABLE_PIN PE1 +#ifndef X_CS_PIN + #define X_CS_PIN PG13 +#endif + +#define Y_STEP_PIN PB8 +#define Y_DIR_PIN PG11 +#define Y_ENABLE_PIN PG12 +#ifndef Y_CS_PIN + #define Y_CS_PIN PG10 +#endif + +#define Z_STEP_PIN PA8 +#define Z_DIR_PIN PD6 +#define Z_ENABLE_PIN PD7 +#ifndef Z_CS_PIN + #define Z_CS_PIN PD5 +#endif + +#define E0_STEP_PIN PC7 +#define E0_DIR_PIN PD3 +#define E0_ENABLE_PIN PD4 +#ifndef E0_CS_PIN + #define E0_CS_PIN PD1 +#endif + +#define E1_STEP_PIN PC6 +#define E1_DIR_PIN PA15 +#define E1_ENABLE_PIN PD0 +#ifndef E1_CS_PIN + #define E1_CS_PIN PA14 +#endif + +#define E2_STEP_PIN PD15 +#define E2_DIR_PIN PG7 +#define E2_ENABLE_PIN PG8 +#ifndef E2_CS_PIN + #define E2_CS_PIN PG6 +#endif + +#define E3_STEP_PIN PD14 +#define E3_DIR_PIN PG4 +#define E3_ENABLE_PIN PG5 +#ifndef E3_CS_PIN + #define E3_CS_PIN PG3 +#endif + +#define E4_STEP_PIN PD13 +#define E4_DIR_PIN PD11 +#define E4_ENABLE_PIN PG2 +#ifndef E4_CS_PIN + #define E4_CS_PIN PD10 +#endif + +#define E5_STEP_PIN PD12 +#define E5_DIR_PIN PD8 +#define E5_ENABLE_PIN PD9 +#ifndef E5_CS_PIN + #define E5_CS_PIN PB12 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA0 // Analog Input +#define TEMP_1_PIN PC1 // Analog Input +#define TEMP_2_PIN PC0 // Analog Input +#define TEMP_3_PIN PF10 // Analog Input +#define TEMP_4_PIN PF5 // Analog Input +#define TEMP_5_PIN PF4 // Analog Input +#define TEMP_BED_PIN PF3 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN PF7 +#define HEATER_1_PIN PF6 +#define HEATER_2_PIN PE6 +#define HEATER_3_PIN PE5 +#define HEATER_4_PIN PE4 +#define HEATER_5_PIN PE3 +#define HEATER_BED_PIN PE2 + +#ifndef FAN_PIN + #define FAN_PIN PF8 +#endif +#define FAN1_PIN PF9 +#define FAN2_PIN PA2 +#define FAN3_PIN PA1 +#define FAN4_PIN PE13 +#define FAN5_PIN PB11 + +// +// Onboard SD support +// + +#define SDIO_D0_PIN PC8 +#define SDIO_D1_PIN PC9 +//#define SD_CARD_DETECT_PIN PC13 +#define SDIO_D2_PIN PC10 +#define SDIO_D3_PIN PC11 +#define SDIO_CK_PIN PC12 +#define SDIO_CMD_PIN PD2 + +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif + +#if SD_CONNECTION_IS(ONBOARD) + + #define SDIO_SUPPORT // Use SDIO for onboard SD + #ifndef SDIO_SUPPORT + #define SOFTWARE_SPI // Use soft SPI for onboard SD + #define SDSS SDIO_D3_PIN + #define SD_SCK_PIN SDIO_CK_PIN + #define SD_MISO_PIN SDIO_D0_PIN + #define SD_MOSI_PIN SDIO_CMD_PIN + #endif + +#elif SD_CONNECTION_IS(LCD) + + #define SD_SCK_PIN PB13 + #define SD_MISO_PIN PB14 + #define SD_MOSI_PIN PB15 + #define SDSS PF11 + #define SD_DETECT_PIN PB2 + +#endif + +// +// Trinamic Software SPI +// + +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PB15 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB14 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB13 + #endif +#endif + +// +// Trinamic Software Serial +// + +#if HAS_TMC_UART + #define X_SERIAL_TX_PIN PG13 + #define X_SERIAL_RX_PIN PG13 + + #define Y_SERIAL_TX_PIN PG10 + #define Y_SERIAL_RX_PIN PG10 + + #define Z_SERIAL_TX_PIN PD5 + #define Z_SERIAL_RX_PIN PD5 + + #define E0_SERIAL_TX_PIN PD1 + #define E0_SERIAL_RX_PIN PD1 + + #define E1_SERIAL_TX_PIN PA14 + #define E1_SERIAL_RX_PIN PA14 + + #define E2_SERIAL_TX_PIN PG6 + #define E2_SERIAL_RX_PIN PG6 + + #define E3_SERIAL_TX_PIN PG3 + #define E3_SERIAL_RX_PIN PG3 + + #define E4_SERIAL_TX_PIN PD10 + #define E4_SERIAL_RX_PIN PD10 + + #define E5_SERIAL_TX_PIN PB12 + #define E5_SERIAL_RX_PIN PB12 + +#endif + +// +// LCD / Controller +// + +#define BEEPER_PIN PB10 +#define LCD_PINS_RS PE12 +#define LCD_PINS_ENABLE PE14 +#define LCD_PINS_D4 PE10 +#define LCD_PINS_D5 PE9 +#define LCD_PINS_D6 PE8 +#define LCD_PINS_D7 PE7 +#define BTN_EN1 PC4 +#define BTN_EN2 PC5 +#define BTN_ENC PE15 + +// +// Filament runout +// + +#define FIL_RUNOUT_PIN PA3 + +// +// ST7920 Delays +// +#ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) +#endif +#ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) +#endif +#ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(715) +#endif |