Initial commit

1 files changed, 137 insertions, 0 deletions

diff --git a/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h b/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h
new file mode 100644
index 0000000..133dcd2
--- /dev/null
+++ b/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h
@@ -0,0 +1,137 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(STM32F7xx)
+  #error "Oops! Select an STM32F7 board in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME      "RemRam v1"
+#define DEFAULT_MACHINE_NAME "RemRam"
+
+#if NO_EEPROM_SELECTED
+  #define SRAM_EEPROM_EMULATION                   // Emulate the EEPROM using Backup SRAM
+#endif
+
+#if HOTENDS > 1 || E_STEPPERS > 1
+  #error "RemRam only supports one hotend / E-stepper. Comment out this line to continue."
+#endif
+
+//
+// Limit Switches
+//
+#if DISABLED(SENSORLESS_HOMING)
+  #define X_MIN_PIN                           58
+  #define X_MAX_PIN                           59
+  #define Y_MIN_PIN                           60
+  #define Y_MAX_PIN                           61
+  #define Z_MIN_PIN                           62
+  #define Z_MAX_PIN                           63
+#else
+  #define X_STOP_PIN                          36
+  #define Y_STOP_PIN                          39
+  #define Z_MIN_PIN                           62
+  #define Z_MAX_PIN                           42
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     26  // EXT_D1
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            22
+#define X_DIR_PIN                             35
+#define X_ENABLE_PIN                          34
+#define X_CS_PIN                              14
+
+#define Y_STEP_PIN                            23
+#define Y_DIR_PIN                             38
+#define Y_ENABLE_PIN                          37
+#define Y_CS_PIN                              15
+
+#define Z_STEP_PIN                            24
+#define Z_DIR_PIN                             41
+#define Z_ENABLE_PIN                          40
+#define Z_CS_PIN                              16
+
+#define E0_STEP_PIN                           25
+#define E0_DIR_PIN                            44
+#define E0_ENABLE_PIN                         43
+#define E0_CS_PIN                             10
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            64  // THERM_1
+#define TEMP_1_PIN                            65  // THERM_2
+#define TEMP_BED_PIN                          66  // THERM_3
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          33
+#define HEATER_BED_PIN                        31
+
+#ifndef FAN_PIN
+  #define FAN_PIN                             30  // "FAN1"
+#endif
+#define FAN1_PIN                              32  // "FAN2"
+
+#ifndef E0_AUTO_FAN_PIN
+  #define E0_AUTO_FAN_PIN                     32
+#endif
+
+//
+// Servos
+//
+#define SERVO0_PIN                            26  // PWM_EXT1
+#define SERVO1_PIN                            27  // PWM_EXT2
+
+#define SDSS                                  57  // Onboard SD card reader
+//#define SDSS                                 9  // LCD SD card reader
+#define LED_PIN                               21  // STATUS_LED
+
+//
+// LCD / Controller
+//
+#define SD_DETECT_PIN                         56  // SD_CARD_DET
+#define BEEPER_PIN                            46  // LCD_BEEPER
+#define LCD_PINS_RS                           49  // LCD_RS
+#define LCD_PINS_ENABLE                       48  // LCD_EN
+#define LCD_PINS_D4                           50  // LCD_D4
+#define LCD_PINS_D5                           51  // LCD_D5
+#define LCD_PINS_D6                           52  // LCD_D6
+#define LCD_PINS_D7                           53  // LCD_D7
+#define BTN_EN1                               54  // BTN_EN1
+#define BTN_EN2                               55  // BTN_EN2
+#define BTN_ENC                               47  // BTN_ENC
+
+//
+// Timers
+//
+
+#define STEP_TIMER                             2