diff options
Diffstat (limited to 'Marlin/src/pins/stm32f7/pins_REMRAM_V1.h')
| -rw-r--r-- | Marlin/src/pins/stm32f7/pins_REMRAM_V1.h | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h b/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h new file mode 100644 index 0000000..133dcd2 --- /dev/null +++ b/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h @@ -0,0 +1,137 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(STM32F7xx) + #error "Oops! Select an STM32F7 board in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "RemRam v1" +#define DEFAULT_MACHINE_NAME "RemRam" + +#if NO_EEPROM_SELECTED + #define SRAM_EEPROM_EMULATION // Emulate the EEPROM using Backup SRAM +#endif + +#if HOTENDS > 1 || E_STEPPERS > 1 + #error "RemRam only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +// +// Limit Switches +// +#if DISABLED(SENSORLESS_HOMING) + #define X_MIN_PIN 58 + #define X_MAX_PIN 59 + #define Y_MIN_PIN 60 + #define Y_MAX_PIN 61 + #define Z_MIN_PIN 62 + #define Z_MAX_PIN 63 +#else + #define X_STOP_PIN 36 + #define Y_STOP_PIN 39 + #define Z_MIN_PIN 62 + #define Z_MAX_PIN 42 +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 26 // EXT_D1 +#endif + +// +// Steppers +// +#define X_STEP_PIN 22 +#define X_DIR_PIN 35 +#define X_ENABLE_PIN 34 +#define X_CS_PIN 14 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 38 +#define Y_ENABLE_PIN 37 +#define Y_CS_PIN 15 + +#define Z_STEP_PIN 24 +#define Z_DIR_PIN 41 +#define Z_ENABLE_PIN 40 +#define Z_CS_PIN 16 + +#define E0_STEP_PIN 25 +#define E0_DIR_PIN 44 +#define E0_ENABLE_PIN 43 +#define E0_CS_PIN 10 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 64 // THERM_1 +#define TEMP_1_PIN 65 // THERM_2 +#define TEMP_BED_PIN 66 // THERM_3 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 33 +#define HEATER_BED_PIN 31 + +#ifndef FAN_PIN + #define FAN_PIN 30 // "FAN1" +#endif +#define FAN1_PIN 32 // "FAN2" + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN 32 +#endif + +// +// Servos +// +#define SERVO0_PIN 26 // PWM_EXT1 +#define SERVO1_PIN 27 // PWM_EXT2 + +#define SDSS 57 // Onboard SD card reader +//#define SDSS 9 // LCD SD card reader +#define LED_PIN 21 // STATUS_LED + +// +// LCD / Controller +// +#define SD_DETECT_PIN 56 // SD_CARD_DET +#define BEEPER_PIN 46 // LCD_BEEPER +#define LCD_PINS_RS 49 // LCD_RS +#define LCD_PINS_ENABLE 48 // LCD_EN +#define LCD_PINS_D4 50 // LCD_D4 +#define LCD_PINS_D5 51 // LCD_D5 +#define LCD_PINS_D6 52 // LCD_D6 +#define LCD_PINS_D7 53 // LCD_D7 +#define BTN_EN1 54 // BTN_EN1 +#define BTN_EN2 55 // BTN_EN2 +#define BTN_ENC 47 // BTN_ENC + +// +// Timers +// + +#define STEP_TIMER 2 |