Initial commit

1 files changed, 148 insertions, 0 deletions

diff --git a/Marlin/src/pins/teensy2/pins_5DPRINT.h b/Marlin/src/pins/teensy2/pins_5DPRINT.h
new file mode 100644
index 0000000..908e12e
--- /dev/null
+++ b/Marlin/src/pins/teensy2/pins_5DPRINT.h
@@ -0,0 +1,148 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ *  Rev B  2 JUN 2017
+ *
+ *  Converted to Arduino pin numbering
+ */
+
+/**
+ *  There are two Arduino IDE extensions that are compatible with this board
+ *  and with the mainstream Marlin software.
+ *
+ *  Teensyduino - https://www.pjrc.com/teensy/teensyduino.html
+ *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
+ *
+ *    Installation instructions are at the above URL.  Don't bother loading the
+ *    libraries - they are not used with the Marlin software.
+ *
+ *  Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
+ *
+ *    Installation:
+ *
+ *       1. Go to the above URL, click on the "Clone or Download" button and then
+ *          click on "Download ZIP" button.
+ *       2. Unzip the file, find the "printrboard" directory and then copy it to the
+ *          hardware directory in Arduino.  The Arduino hardware directory will probably
+ *          be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
+ *       3. Restart Arduino.
+ *       4. Select "Printrboard" from the 'Tools > Board' menu.
+ *
+ *  Teensyduino is the most popular option. Printrboard is used if your board doesn't have
+ *  the Teensyduino bootloader on it.
+ */
+
+/**
+ *  To burn the bootloader that comes with Printrboard:
+ *
+ *   1. Connect your programmer to the board.
+ *   2. In the Arduino IDE select "Printrboard" and then select the programmer.
+ *   3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
+ *   4. The programmer is no longer needed. Remove it.
+ */
+
+/**
+ * 5DPrint D8 Driver board pin assignments
+ *
+ * https://bitbucket.org/makible/5dprint-d8-controller-board
+ */
+
+#if NOT_TARGET(__AVR_AT90USB1286__)
+  #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
+#endif
+
+#define DEFAULT_MACHINE_NAME "Makibox"
+#define BOARD_INFO_NAME      "5DPrint D8"
+
+//
+// Servos
+//
+#define SERVO0_PIN                            41
+#define SERVO1_PIN                            42
+#define SERVO2_PIN                            43
+#define SERVO3_PIN                            44
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            37  // E5
+#define Y_STOP_PIN                            36  // E4
+#define Z_STOP_PIN                            19  // E7
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            28  // A0
+#define X_DIR_PIN                             29  // A1
+#define X_ENABLE_PIN                          17  // C7
+
+#define Y_STEP_PIN                            30  // A2
+#define Y_DIR_PIN                             31  // A3
+#define Y_ENABLE_PIN                          13  // C3
+
+#define Z_STEP_PIN                            32  // A4
+#define Z_DIR_PIN                             33  // A5
+#define Z_ENABLE_PIN                          12  // C2
+
+#define E0_STEP_PIN                           34  // A6
+#define E0_DIR_PIN                            35  // A7
+#define E0_ENABLE_PIN                         11  // C1
+
+//
+// Digital Microstepping
+//
+#define X_MS1_PIN                             25  // B5
+#define X_MS2_PIN                             26  // B6
+#define Y_MS1_PIN                              9  // E1
+#define Y_MS2_PIN                              8  // E0
+#define Z_MS1_PIN                              7  // D7
+#define Z_MS2_PIN                              6  // D6
+#define E0_MS1_PIN                             5  // D5
+#define E0_MS2_PIN                             4  // D4
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             1  // F1  Analog Input
+#define TEMP_BED_PIN                           0  // F0  Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          15  // C5
+#define HEATER_BED_PIN                        14  // C4
+
+#ifndef FAN_PIN
+  #define FAN_PIN                             16  // C6  PWM3A
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                  20  // B0
+
+//DIGIPOTS slave addresses
+#ifndef DIGIPOT_I2C_ADDRESS_A
+  #define DIGIPOT_I2C_ADDRESS_A             0x2C  // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1)
+#endif