Initial commit

1 files changed, 239 insertions, 0 deletions

diff --git a/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h b/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h
new file mode 100644
index 0000000..ae973c8
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h
@@ -0,0 +1,239 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+
+
+#define PA1 	0
+#define PA2 	1
+#define PA3 	2
+#define PA4 	3
+#define PA5 	4
+#define PA6 	5
+#define PA7 	6
+#define PA8 	7
+#define PA9   	8
+#define PA10	9
+#define PA11	10
+#define PA12	11
+#define PA13	12
+#define PA14	13
+#define PA15	14
+#define PB0	    15
+#define PB1   	16
+#define PB2	    17
+#define PB3	    18
+#define PB4    	19
+#define PB5   	20
+#define PB6	    21
+#define PB7	    22
+#define PB8	    23
+#define PB9   	24
+#define PB10	25
+#define PB11	26
+#define PB12	27
+#define PB13	28
+#define PB14	29
+#define PB15	30
+#define PC2 	31
+#define PC3 	32
+#define PC4 	33
+#define PC5 	34
+#define PC6 	35
+#define PC7 	36
+#define PC8 	37
+#define PC9 	38
+#define PC10	39
+#define PC11	40
+#define PC12	41
+#define PC13	42
+#define PC14	43
+#define PC15	44
+#define PD0 	45
+#define PD1 	46
+#define PD2 	47
+#define PD3 	48
+#define PD4 	49
+#define PD5 	50
+#define PD6 	51
+#define PD7 	52
+#define PD8 	53
+#define PD9 	54
+#define PD10	55
+#define PD11	56
+#define PD12	57
+#define PD13	58
+#define PD14	59
+#define PD15	60
+#define PE0 	61
+#define PE1 	62
+#define PE11 	63
+#define PE3 	64
+#define PE4 	65
+#define PE5 	66
+#define PE6 	67
+#define PE7 	68
+#define PE8 	69
+#define PE9 	70
+#define PE10	71
+#define PE2     72
+#define PE12	73
+#define PE13	74
+#define PE14	75
+#define PE15	76
+#define PF0 	77
+#define PF1 	78
+#define PF2 	79
+#define PF6 	80
+#define PF7 	81
+#define PF8 	82
+#define PF9 	83
+#define PF11	84
+#define PF12	85
+#define PF13	86
+#define PF14	87
+#define PF15	88
+#define PG0 	89
+#define PG1 	90
+#define PG2 	91
+#define PG3 	92
+#define PG4 	93
+#define PG5 	94
+#define PG6 	95
+#define PG7 	96
+#define PG8 	97
+#define PG9 	98
+#define PG10	99
+#define PG11	100
+#define PG12	101
+#define PG13	102
+#define PG14	103
+#define PG15	104
+#define PH0 	105
+#define PH1	    106
+#define PA0   	107
+#define PC1 	108
+#define PC0 	109
+#define PF10	110
+#define PF5 	111
+#define PF4 	112
+#define PF3 	113
+
+// This must be a literal
+#define NUM_DIGITAL_PINS        114
+// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       7
+#define NUM_ANALOG_FIRST        107
+
+
+// Below SPI and I2C definitions already done in the core
+// Could be redefined here if differs from the default one
+// SPI Definitions
+#define PIN_SPI_SS              PF11
+#define PIN_SPI_MOSI            PB15
+#define PIN_SPI_MISO            PB14
+#define PIN_SPI_SCK             PB13
+
+
+
+//max6675
+//#define PIN_SPI_SS              PA4
+//#define PIN_SPI_SCK             PA5
+//#define PIN_SPI_MISO            PA6
+//#define PIN_SPI_MOSI            PA7
+
+
+
+
+// I2C Definitions
+#define PIN_WIRE_SDA            PB7
+#define PIN_WIRE_SCL            PB6
+
+// Timer Definitions
+//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
+#define TIMER_TONE              TIM6
+
+// Do not use basic timer: OC is required
+#define TIMER_SERVO             TIM1  //TODO: advanced-control timers don't work
+
+// UART Definitions
+// Define here Serial instance number to map on Serial generic name
+#define SERIAL_UART_INSTANCE    1 //ex: 2 for Serial2 (USART2)
+// DEBUG_UART could be redefined to print on another instance than 'Serial'
+//#define DEBUG_UART              ((USART_TypeDef *) U(S)ARTX) // ex: USART3
+// DEBUG_UART baudrate, default: 9600 if not defined
+//#define DEBUG_UART_BAUDRATE     x
+// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART
+//#define DEBUG_PINNAME_TX        PX_n // PinName used for TX
+
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#define PIN_SERIAL_RX           PA10
+#define PIN_SERIAL_TX           PA9
+
+/* Extra HAL modules */
+//#define HAL_DAC_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR     Serial
+#define SERIAL_PORT_HARDWARE    Serial1
+#endif
+