diff options
Diffstat (limited to 'buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h')
| -rw-r--r-- | buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h | 239 |
1 files changed, 239 insertions, 0 deletions
diff --git a/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h b/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h new file mode 100644 index 0000000..ae973c8 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/FLY_F407ZG/variant.h @@ -0,0 +1,239 @@ +/* + ******************************************************************************* + * Copyright (c) 2017, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#pragma once + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + + +#define PA1 0 +#define PA2 1 +#define PA3 2 +#define PA4 3 +#define PA5 4 +#define PA6 5 +#define PA7 6 +#define PA8 7 +#define PA9 8 +#define PA10 9 +#define PA11 10 +#define PA12 11 +#define PA13 12 +#define PA14 13 +#define PA15 14 +#define PB0 15 +#define PB1 16 +#define PB2 17 +#define PB3 18 +#define PB4 19 +#define PB5 20 +#define PB6 21 +#define PB7 22 +#define PB8 23 +#define PB9 24 +#define PB10 25 +#define PB11 26 +#define PB12 27 +#define PB13 28 +#define PB14 29 +#define PB15 30 +#define PC2 31 +#define PC3 32 +#define PC4 33 +#define PC5 34 +#define PC6 35 +#define PC7 36 +#define PC8 37 +#define PC9 38 +#define PC10 39 +#define PC11 40 +#define PC12 41 +#define PC13 42 +#define PC14 43 +#define PC15 44 +#define PD0 45 +#define PD1 46 +#define PD2 47 +#define PD3 48 +#define PD4 49 +#define PD5 50 +#define PD6 51 +#define PD7 52 +#define PD8 53 +#define PD9 54 +#define PD10 55 +#define PD11 56 +#define PD12 57 +#define PD13 58 +#define PD14 59 +#define PD15 60 +#define PE0 61 +#define PE1 62 +#define PE11 63 +#define PE3 64 +#define PE4 65 +#define PE5 66 +#define PE6 67 +#define PE7 68 +#define PE8 69 +#define PE9 70 +#define PE10 71 +#define PE2 72 +#define PE12 73 +#define PE13 74 +#define PE14 75 +#define PE15 76 +#define PF0 77 +#define PF1 78 +#define PF2 79 +#define PF6 80 +#define PF7 81 +#define PF8 82 +#define PF9 83 +#define PF11 84 +#define PF12 85 +#define PF13 86 +#define PF14 87 +#define PF15 88 +#define PG0 89 +#define PG1 90 +#define PG2 91 +#define PG3 92 +#define PG4 93 +#define PG5 94 +#define PG6 95 +#define PG7 96 +#define PG8 97 +#define PG9 98 +#define PG10 99 +#define PG11 100 +#define PG12 101 +#define PG13 102 +#define PG14 103 +#define PG15 104 +#define PH0 105 +#define PH1 106 +#define PA0 107 +#define PC1 108 +#define PC0 109 +#define PF10 110 +#define PF5 111 +#define PF4 112 +#define PF3 113 + +// This must be a literal +#define NUM_DIGITAL_PINS 114 +// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS +#define NUM_ANALOG_INPUTS 7 +#define NUM_ANALOG_FIRST 107 + + +// Below SPI and I2C definitions already done in the core +// Could be redefined here if differs from the default one +// SPI Definitions +#define PIN_SPI_SS PF11 +#define PIN_SPI_MOSI PB15 +#define PIN_SPI_MISO PB14 +#define PIN_SPI_SCK PB13 + + + +//max6675 +//#define PIN_SPI_SS PA4 +//#define PIN_SPI_SCK PA5 +//#define PIN_SPI_MISO PA6 +//#define PIN_SPI_MOSI PA7 + + + + +// I2C Definitions +#define PIN_WIRE_SDA PB7 +#define PIN_WIRE_SCL PB6 + +// Timer Definitions +//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c +#define TIMER_TONE TIM6 + +// Do not use basic timer: OC is required +#define TIMER_SERVO TIM1 //TODO: advanced-control timers don't work + +// UART Definitions +// Define here Serial instance number to map on Serial generic name +#define SERIAL_UART_INSTANCE 1 //ex: 2 for Serial2 (USART2) +// DEBUG_UART could be redefined to print on another instance than 'Serial' +//#define DEBUG_UART ((USART_TypeDef *) U(S)ARTX) // ex: USART3 +// DEBUG_UART baudrate, default: 9600 if not defined +//#define DEBUG_UART_BAUDRATE x +// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART +//#define DEBUG_PINNAME_TX PX_n // PinName used for TX + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#define PIN_SERIAL_RX PA10 +#define PIN_SERIAL_TX PA9 + +/* Extra HAL modules */ +//#define HAL_DAC_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial1 +#endif + |