diff options
Diffstat (limited to 'Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h')
| -rw-r--r-- | Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h | 118 |
1 files changed, 118 insertions, 0 deletions
diff --git a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h new file mode 100644 index 0000000..700e79d --- /dev/null +++ b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h @@ -0,0 +1,118 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Selena Compact pin assignments + */ + +#if NOT_TARGET(MCU_LPC1768) + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#define BOARD_INFO_NAME "Selena Compact" +#define BOARD_WEBSITE_URL "github.com/Ales2-k/Selena" + +// +// Servos +// +#define SERVO0_PIN P1_23 + +// +// Limit Switches +// +#define X_MIN_PIN P1_28 +#define X_MAX_PIN P1_25 +#define Y_MIN_PIN P2_11 +#define Y_MAX_PIN -1 +#define Z_MIN_PIN P1_27 +#define Z_MAX_PIN -1 +#define Z_PROBE P1_22 + +// +// Steppers +// +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 + +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 + +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 + +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) +#define TEMP_0_PIN P0_24_A1 // A1 (TH2) +#define TEMP_1_PIN P0_25_A2 // A2 (TH3) + +// +// Heaters / Fans +// + +#define HEATER_BED_PIN P2_05 +#define HEATER_BED2_PIN P2_04 +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P2_06 +#ifndef FAN_PIN + #define FAN_PIN P1_24 +#endif +#define FAN1_PIN P1_26 + +// +// Display +// + +#if IS_RRD_FG_SC + #define LCD_PINS_RS P0_16 + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 + #define LCD_PINS_D5 P1_00 + #define LCD_PINS_D6 P1_01 + #define LCD_PINS_D7 P1_04 + #define BEEPER_PIN P1_31 + + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + #define BTN_ENC P1_30 + + #define SD_DETECT_PIN -1 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // IS_RRD_FG_SC |