diff options
Diffstat (limited to 'Marlin/src/pins/rambo/pins_SCOOVO_X9H.h')
| -rw-r--r-- | Marlin/src/pins/rambo/pins_SCOOVO_X9H.h | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h new file mode 100644 index 0000000..5680b00 --- /dev/null +++ b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h @@ -0,0 +1,159 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/************************************************ + * Rambo pin assignments MODIFIED FOR Scoovo X9H + ************************************************/ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Scoovo X9H" + +// +// Servos +// +#define SERVO0_PIN 22 // Motor header MX1 +#define SERVO1_PIN 23 // Motor header MX2 +#define SERVO2_PIN 24 // Motor header MX3 +#define SERVO3_PIN 5 // PWM header pin 5 + +// +// Limit Switches +// +#define X_MIN_PIN 12 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 23 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 30 + +// +// Z Probe (when not Z_MIN_IN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 30 +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_ENABLE_PIN 29 + +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_ENABLE_PIN 28 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 + +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 + +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 42 +#define E1_ENABLE_PIN 25 + +// Microstepping pins - Mapping not from fastio.h (?) +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 +#define E1_MS1_PIN 63 +#define E1_MS2_PIN 64 + +#define DIGIPOTSS_PIN 38 +#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 } // X Y Z E0 E1 digipot channels to stepper driver mapping + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_BED_PIN 7 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 3 + +#ifndef FAN_PIN + #define FAN_PIN 8 +#endif +#define FAN1_PIN 6 +#define FAN2_PIN 2 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 4 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 3 // Analog Input +#endif + +// +// LCD / Controller +// +#define LCD_PINS_RS 70 // Ext2_5 +#define LCD_PINS_ENABLE 71 // Ext2_7 +#define LCD_PINS_D4 72 // Ext2_9 ? +#define LCD_PINS_D5 73 // Ext2_11 ? +#define LCD_PINS_D6 74 // Ext2_13 +#define LCD_PINS_D7 75 // Ext2_15 ? +#define BEEPER_PIN -1 + +#define BTN_HOME 80 // Ext_16 +#define BTN_CENTER 81 // Ext_14 +#define BTN_ENC BTN_CENTER +#define BTN_RIGHT 82 // Ext_12 +#define BTN_LEFT 83 // Ext_10 +#define BTN_UP 84 // Ext2_8 +#define BTN_DOWN 85 // Ext2_6 + +#define HOME_PIN BTN_HOME + +#if ANY(VIKI2, miniVIKI) + #define BEEPER_PIN 44 + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 70 + #define DOGLCD_CS 71 + #define LCD_SCREEN_ROT_180 + + #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board + + #define STAT_LED_RED_PIN 22 + #define STAT_LED_BLUE_PIN 32 +#endif // VIKI2/miniVIKI |