diff options
Diffstat (limited to 'Marlin/src/pins/ramps/pins_FYSETC_F6_13.h')
| -rw-r--r-- | Marlin/src/pins/ramps/pins_FYSETC_F6_13.h | 301 |
1 files changed, 301 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h new file mode 100644 index 0000000..6133a64 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h @@ -0,0 +1,301 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +// +// FYSETC F6 1.3 (and 1.4) pin assignments +// + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'FYSETC F6' in 'Tools > Board.'" +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "FYSETC F6 1.3" +#endif + +#define RESET_PIN 30 +#define SPI_FLASH_CS 83 + +// +// Servos +// +#define SERVO0_PIN 13 +#define SERVO1_PIN 11 // (PS_ON_PIN) +#define SERVO2_PIN 10 // (FIL_RUNOUT_PIN) +#define SERVO3_PIN 4 // (RGB_LED_G_PIN) + +// +// Limit Switches +// +#define X_MIN_PIN 63 +#define X_MAX_PIN 64 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 12 +#ifndef Z_MAX_PIN + #define Z_MAX_PIN 9 +#endif + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN SERVO2_PIN +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 9 // Servos pin +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 70 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 39 +#endif + +#define Z_STEP_PIN 43 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 58 +#ifndef Z_CS_PIN + #define Z_CS_PIN 74 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 47 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 32 +#endif + +#define E2_STEP_PIN 59 +#define E2_DIR_PIN 57 +#define E2_ENABLE_PIN 40 +#ifndef E2_CS_PIN + #define E2_CS_PIN 42 +#endif + +// +// Sensorless homing DIAG pin is not directly connected to the MCU. Close +// the jumper next to the limit switch socket when using sensorless homing. +// + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Software serial communication pins. + * At the moment, F6 rx pins are not pc interrupt pins + */ + #ifndef X_SERIAL_RX_PIN + #define X_SERIAL_RX_PIN -1 // 71 + #endif + #ifndef X_SERIAL_TX_PIN + #define X_SERIAL_TX_PIN 72 + #endif + #ifndef Y_SERIAL_RX_PIN + #define Y_SERIAL_RX_PIN -1 // 73 + #endif + #ifndef Y_SERIAL_TX_PIN + #define Y_SERIAL_TX_PIN 75 + #endif + #ifndef Z_SERIAL_RX_PIN + #define Z_SERIAL_RX_PIN -1 // 78 + #endif + #ifndef Z_SERIAL_TX_PIN + #define Z_SERIAL_TX_PIN 79 + #endif + #ifndef E0_SERIAL_RX_PIN + #define E0_SERIAL_RX_PIN -1 // 76 + #endif + #ifndef E0_SERIAL_TX_PIN + #define E0_SERIAL_TX_PIN 77 + #endif + #ifndef E1_SERIAL_RX_PIN + #define E1_SERIAL_RX_PIN -1 // 80 + #endif + #ifndef E1_SERIAL_TX_PIN + #define E1_SERIAL_TX_PIN 81 + #endif + #ifndef E2_SERIAL_RX_PIN + #define E2_SERIAL_RX_PIN -1 // 22 + #endif + #ifndef E2_SERIAL_TX_PIN + #define E2_SERIAL_TX_PIN 82 + #endif +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 12 // Analog Input +#define TEMP_1_PIN 13 // Analog Input +#define TEMP_2_PIN 14 // Analog Input +#define TEMP_BED_PIN 15 // Analog Input + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 9 // Analog Input on X+ endstop +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 5 +#define HEATER_1_PIN 6 +#define HEATER_2_PIN 7 +#define HEATER_BED_PIN 8 + +#define FAN_PIN 44 +#define FAN1_PIN 45 +#define FAN2_PIN 46 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define KILL_PIN 41 + +#ifndef PS_ON_PIN + #define PS_ON_PIN SERVO1_PIN +#endif + +/** + * ----- ----- + * 5V/D41 | · · | GND 5V | · · | GND + * RESET | · · | D49 (SD_DETECT) (LCD_D7) D29 | · · | D27 (LCD_D6) + * (MOSI) D51 | · · D33 (BTN_EN2) (LCD_D5) D25 | · · D23 (LCD_D4) + * (SD_SS) D53 | · · | D31 (BTN_EN1) (LCD_RS) D16 | · · | D17 (LCD_EN) + * (SCK) D52 | · · | D50 (MISO) (BTN_ENC) D35 | · · | D37 (BEEPER) + * ----- ----- + * EXP2 EXP1 + */ + +// +// LCDs and Controllers +// +#define SD_DETECT_PIN 49 + +#if ENABLED(FYSETC_242_OLED_12864) + #define BTN_EN1 37 + #define BTN_EN2 29 + #define BTN_ENC 35 + #define BEEPER_PIN 31 + + #define LCD_PINS_DC 25 + #define LCD_PINS_RS 33 + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 23 + #define DOGLCD_SCK 17 + #define DOGLCD_A0 LCD_PINS_DC + + #undef KILL_PIN + #define NEOPIXEL_PIN 27 + +#else + #define BEEPER_PIN 37 + + #if ENABLED(FYSETC_MINI_12864) + // + // See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 + // + #define DOGLCD_A0 16 + #define DOGLCD_CS 17 + + #if ENABLED(FYSETC_GENERIC_12864_1_1) + #define LCD_BACKLIGHT_PIN 27 + #endif + + #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + // Seems to work best if left open. + + #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 25 + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN 27 + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN 29 + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN 25 + #endif + + #elif HAS_MARLINUI_U8GLIB || HAS_MARLINUI_HD44780 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + #if ENABLED(MKS_MINI_12864) + #define DOGLCD_CS 25 + #define DOGLCD_A0 27 + #endif + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #if IS_NEWPANEL + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #endif +#endif + +#ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN 3 +#endif +#ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN 4 +#endif +#ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN 9 +#endif +#ifndef RGB_LED_W_PIN + #define RGB_LED_W_PIN -1 +#endif |