Initial commit

1 files changed, 301 insertions, 0 deletions

diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h
new file mode 100644
index 0000000..6133a64
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h
@@ -0,0 +1,301 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//
+// FYSETC F6 1.3 (and 1.4) pin assignments
+//
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'FYSETC F6' in 'Tools > Board.'"
+#endif
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "FYSETC F6 1.3"
+#endif
+
+#define RESET_PIN                             30
+#define SPI_FLASH_CS                          83
+
+//
+// Servos
+//
+#define SERVO0_PIN                            13
+#define SERVO1_PIN                            11  // (PS_ON_PIN)
+#define SERVO2_PIN                            10  // (FIL_RUNOUT_PIN)
+#define SERVO3_PIN                             4  // (RGB_LED_G_PIN)
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                             63
+#define X_MAX_PIN                             64
+#define Y_MIN_PIN                             14
+#define Y_MAX_PIN                             15
+#define Z_MIN_PIN                             12
+#ifndef Z_MAX_PIN
+  #define Z_MAX_PIN                            9
+#endif
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN              SERVO2_PIN
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                      9  // Servos pin
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            54
+#define X_DIR_PIN                             55
+#define X_ENABLE_PIN                          38
+#ifndef X_CS_PIN
+  #define X_CS_PIN                            70
+#endif
+
+#define Y_STEP_PIN                            60
+#define Y_DIR_PIN                             61
+#define Y_ENABLE_PIN                          56
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                            39
+#endif
+
+#define Z_STEP_PIN                            43
+#define Z_DIR_PIN                             48
+#define Z_ENABLE_PIN                          58
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                            74
+#endif
+
+#define E0_STEP_PIN                           26
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         24
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                           47
+#endif
+
+#define E1_STEP_PIN                           36
+#define E1_DIR_PIN                            34
+#define E1_ENABLE_PIN                         30
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN                           32
+#endif
+
+#define E2_STEP_PIN                           59
+#define E2_DIR_PIN                            57
+#define E2_ENABLE_PIN                         40
+#ifndef E2_CS_PIN
+  #define E2_CS_PIN                           42
+#endif
+
+//
+// Sensorless homing DIAG pin is not directly connected to the MCU. Close
+// the jumper next to the limit switch socket when using sensorless homing.
+//
+
+#if HAS_TMC_UART
+  /**
+   * TMC2208/TMC2209 stepper drivers
+   *
+   * Software serial communication pins.
+   * At the moment, F6 rx pins are not pc interrupt pins
+   */
+  #ifndef X_SERIAL_RX_PIN
+    #define X_SERIAL_RX_PIN                   -1  // 71
+  #endif
+  #ifndef X_SERIAL_TX_PIN
+    #define X_SERIAL_TX_PIN                   72
+  #endif
+  #ifndef Y_SERIAL_RX_PIN
+    #define Y_SERIAL_RX_PIN                   -1  // 73
+  #endif
+  #ifndef Y_SERIAL_TX_PIN
+    #define Y_SERIAL_TX_PIN                   75
+  #endif
+  #ifndef Z_SERIAL_RX_PIN
+    #define Z_SERIAL_RX_PIN                   -1  // 78
+  #endif
+  #ifndef Z_SERIAL_TX_PIN
+    #define Z_SERIAL_TX_PIN                   79
+  #endif
+  #ifndef E0_SERIAL_RX_PIN
+    #define E0_SERIAL_RX_PIN                  -1  // 76
+  #endif
+  #ifndef E0_SERIAL_TX_PIN
+    #define E0_SERIAL_TX_PIN                  77
+  #endif
+  #ifndef E1_SERIAL_RX_PIN
+    #define E1_SERIAL_RX_PIN                  -1  // 80
+  #endif
+  #ifndef E1_SERIAL_TX_PIN
+    #define E1_SERIAL_TX_PIN                  81
+  #endif
+  #ifndef E2_SERIAL_RX_PIN
+    #define E2_SERIAL_RX_PIN                  -1  // 22
+  #endif
+  #ifndef E2_SERIAL_TX_PIN
+    #define E2_SERIAL_TX_PIN                  82
+  #endif
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            12  // Analog Input
+#define TEMP_1_PIN                            13  // Analog Input
+#define TEMP_2_PIN                            14  // Analog Input
+#define TEMP_BED_PIN                          15  // Analog Input
+
+#ifndef FILWIDTH_PIN
+  #define FILWIDTH_PIN                         9  // Analog Input on X+ endstop
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           5
+#define HEATER_1_PIN                           6
+#define HEATER_2_PIN                           7
+#define HEATER_BED_PIN                         8
+
+#define FAN_PIN                               44
+#define FAN1_PIN                              45
+#define FAN2_PIN                              46
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define LED_PIN                               13
+#define KILL_PIN                              41
+
+#ifndef PS_ON_PIN
+  #define PS_ON_PIN                   SERVO1_PIN
+#endif
+
+/**
+ *               -----                                             -----
+ *       5V/D41 | · · | GND                                    5V | · · | GND
+ *        RESET | · · | D49 (SD_DETECT)             (LCD_D7)  D29 | · · | D27  (LCD_D6)
+ *   (MOSI) D51 | · ·   D33 (BTN_EN2)               (LCD_D5)  D25 | · ·   D23  (LCD_D4)
+ *  (SD_SS) D53 | · · | D31 (BTN_EN1)               (LCD_RS)  D16 | · · | D17  (LCD_EN)
+ *    (SCK) D52 | · · | D50 (MISO)                 (BTN_ENC)  D35 | · · | D37  (BEEPER)
+ *               -----                                             -----
+ *               EXP2                                              EXP1
+ */
+
+//
+// LCDs and Controllers
+//
+#define SD_DETECT_PIN                         49
+
+#if ENABLED(FYSETC_242_OLED_12864)
+  #define BTN_EN1                             37
+  #define BTN_EN2                             29
+  #define BTN_ENC                             35
+  #define BEEPER_PIN                          31
+
+  #define LCD_PINS_DC                         25
+  #define LCD_PINS_RS                         33
+  #define DOGLCD_CS                           16
+  #define DOGLCD_MOSI                         23
+  #define DOGLCD_SCK                          17
+  #define DOGLCD_A0                  LCD_PINS_DC
+
+  #undef KILL_PIN
+  #define NEOPIXEL_PIN                        27
+
+#else
+  #define BEEPER_PIN                          37
+
+  #if ENABLED(FYSETC_MINI_12864)
+    //
+    // See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
+    //
+    #define DOGLCD_A0                         16
+    #define DOGLCD_CS                         17
+
+    #if ENABLED(FYSETC_GENERIC_12864_1_1)
+      #define LCD_BACKLIGHT_PIN               27
+    #endif
+
+    #define LCD_RESET_PIN                     23  // Must be high or open for LCD to operate normally.
+                                  // Seems to work best if left open.
+
+    #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+      #ifndef RGB_LED_R_PIN
+        #define RGB_LED_R_PIN                 25
+      #endif
+      #ifndef RGB_LED_G_PIN
+        #define RGB_LED_G_PIN                 27
+      #endif
+      #ifndef RGB_LED_B_PIN
+        #define RGB_LED_B_PIN                 29
+      #endif
+    #elif ENABLED(FYSETC_MINI_12864_2_1)
+      #define NEOPIXEL_PIN                    25
+    #endif
+
+  #elif HAS_MARLINUI_U8GLIB || HAS_MARLINUI_HD44780
+
+    #define LCD_PINS_RS                       16
+    #define LCD_PINS_ENABLE                   17
+    #define LCD_PINS_D4                       23
+    #define LCD_PINS_D5                       25
+    #define LCD_PINS_D6                       27
+    #define LCD_PINS_D7                       29
+
+    #if ENABLED(MKS_MINI_12864)
+      #define DOGLCD_CS                       25
+      #define DOGLCD_A0                       27
+    #endif
+
+    #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+      #define BTN_ENC_EN             LCD_PINS_D7  // Detect the presence of the encoder
+    #endif
+
+  #endif
+
+  #if IS_NEWPANEL
+    #define BTN_EN1                           31
+    #define BTN_EN2                           33
+    #define BTN_ENC                           35
+  #endif
+#endif
+
+#ifndef RGB_LED_R_PIN
+  #define RGB_LED_R_PIN                        3
+#endif
+#ifndef RGB_LED_G_PIN
+  #define RGB_LED_G_PIN                        4
+#endif
+#ifndef RGB_LED_B_PIN
+  #define RGB_LED_B_PIN                        9
+#endif
+#ifndef RGB_LED_W_PIN
+  #define RGB_LED_W_PIN                       -1
+#endif