diff options
Diffstat (limited to 'Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h')
| -rw-r--r-- | Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h new file mode 100644 index 0000000..84e7e31 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h @@ -0,0 +1,185 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Tenlog pin assignments + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "Tenlog supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "Tenlog D3 Hero" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +// +// Servos +// +#define SERVO0_PIN 11 +#define SERVO1_PIN 6 +#define SERVO2_PIN -1 // Original pin 5 used for hotend fans +#define SERVO3_PIN 4 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 14 +//#define Y_MAX_PIN 15 // Connected to "DJ" plug on extruder heads +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 15 // Ramps is normally 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +//#ifndef X_CS_PIN + //#define X_CS_PIN 53 +//#endif + +#define X2_STEP_PIN 36 +#define X2_DIR_PIN 34 +#define X2_ENABLE_PIN 30 +//#ifndef X2_CS_PIN + //#define X2_CS_PIN 53 +//#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +//#ifndef Y_CS_PIN + //#define Y_CS_PIN 49 +//#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +//#ifndef Z_CS_PIN + //#define Z_CS_PIN 40 +//#endif + +#define Z2_STEP_PIN 65 +#define Z2_DIR_PIN 66 +#define Z2_ENABLE_PIN 64 +//#ifndef Z2_CS_PIN + //#define Z2_CS_PIN 40 +//#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +//#ifndef E0_CS_PIN + //define E0_CS_PIN 42 +//#endif + +#define E1_STEP_PIN 57 +#define E1_DIR_PIN 58 +#define E1_ENABLE_PIN 59 +//#ifndef E1_CS_PIN + //define E1_CS_PIN 44 +//#endif + +//#define E2_STEP_PIN 42 +//#define E2_DIR_PIN 43 +//#define E2_ENABLE_PIN 44 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS_PIN -1 // Don't use 53 if using Display/SD card +#else + #define MAX6675_SS_PIN -1 // Don't use 49 (SD_DETECT_PIN) +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 11 +#define HEATER_BED_PIN 8 + +#define FAN_PIN 9 +#define FAN1_PIN 5 // Normall this would be a servo pin + +// XXX Runout support unknown? +//#define NUM_RUNOUT_SENSORS 0 +//#define FIL_RUNOUT_PIN 22 +//#define FIL_RUNOUT2_PIN 21 + +// +// Misc. Functions +// +//#define CASE_LIGHT_PIN 5 +#define SDSS 53 +//#ifndef LED_PIN + //#define LED_PIN 13 +//#endif + +//#define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM +//#define SPINDLE_LASER_ENA_PIN 4 // Pullup! + +// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector +//#define FILWIDTH_PIN 5 // Analog Input + +// +// LCD / Controller +// + +//#if IS_RRD_SC + +#define LCD_PINS_RS -1 +#define LCD_PINS_ENABLE -1 +#define LCD_PINS_D4 -1 +#define LCD_PINS_D5 -1 +#define LCD_PINS_D6 -1 +#define LCD_PINS_D7 -1 +//#define BTN_EN1 31 +//#define BTN_EN2 33 +//#define BTN_ENC 35 +#define SD_DETECT_PIN 49 +//#ifndef KILL_PIN + //#define KILL_PIN 41 +//#endif +//#ifndef BEEPER_PIN +#define BEEPER_PIN -1 +//#endif + +//#endif // IS_RRD_SC |