Initial commit

1 files changed, 185 insertions, 0 deletions

diff --git a/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h
new file mode 100644
index 0000000..84e7e31
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h
@@ -0,0 +1,185 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Tenlog pin assignments
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#elif HOTENDS > 2 || E_STEPPERS > 2
+  #error "Tenlog supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME      "Tenlog D3 Hero"
+#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
+
+//
+// Servos
+//
+#define SERVO0_PIN                            11
+#define SERVO1_PIN                             6
+#define SERVO2_PIN                            -1  // Original pin 5 used for hotend fans
+#define SERVO3_PIN                             4
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                              3
+#define X_MAX_PIN                              2
+#define Y_MIN_PIN                             14
+//#define Y_MAX_PIN                           15  // Connected to "DJ" plug on extruder heads
+#define Z_MIN_PIN                             18
+#define Z_MAX_PIN                             19
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     15  // Ramps is normally 32
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            54
+#define X_DIR_PIN                             55
+#define X_ENABLE_PIN                          38
+//#ifndef X_CS_PIN
+  //#define X_CS_PIN                          53
+//#endif
+
+#define X2_STEP_PIN                           36
+#define X2_DIR_PIN                            34
+#define X2_ENABLE_PIN                         30
+//#ifndef X2_CS_PIN
+  //#define X2_CS_PIN                         53
+//#endif
+
+#define Y_STEP_PIN                            60
+#define Y_DIR_PIN                             61
+#define Y_ENABLE_PIN                          56
+//#ifndef Y_CS_PIN
+ //#define Y_CS_PIN                           49
+//#endif
+
+#define Z_STEP_PIN                            46
+#define Z_DIR_PIN                             48
+#define Z_ENABLE_PIN                          62
+//#ifndef Z_CS_PIN
+ //#define Z_CS_PIN                           40
+//#endif
+
+#define Z2_STEP_PIN                           65
+#define Z2_DIR_PIN                            66
+#define Z2_ENABLE_PIN                         64
+//#ifndef Z2_CS_PIN
+ //#define Z2_CS_PIN                          40
+//#endif
+
+#define E0_STEP_PIN                           26
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         24
+//#ifndef E0_CS_PIN
+  //define E0_CS_PIN                          42
+//#endif
+
+#define E1_STEP_PIN                           57
+#define E1_DIR_PIN                            58
+#define E1_ENABLE_PIN                         59
+//#ifndef E1_CS_PIN
+  //define E1_CS_PIN                          44
+//#endif
+
+//#define E2_STEP_PIN                         42
+//#define E2_DIR_PIN                          43
+//#define E2_ENABLE_PIN                       44
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            13  // Analog Input
+#define TEMP_1_PIN                            15  // Analog Input
+#define TEMP_BED_PIN                          14  // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#if DISABLED(SDSUPPORT)
+  #define MAX6675_SS_PIN                      -1  // Don't use 53 if using Display/SD card
+#else
+  #define MAX6675_SS_PIN                      -1  // Don't use 49 (SD_DETECT_PIN)
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          10
+#define HEATER_1_PIN                          11
+#define HEATER_BED_PIN                         8
+
+#define FAN_PIN                                9
+#define FAN1_PIN                               5  // Normall this would be a servo pin
+
+// XXX Runout support unknown?
+//#define NUM_RUNOUT_SENSORS                   0
+//#define FIL_RUNOUT_PIN                      22
+//#define FIL_RUNOUT2_PIN                     21
+
+//
+// Misc. Functions
+//
+//#define CASE_LIGHT_PIN                       5
+#define SDSS                                  53
+//#ifndef LED_PIN
+  //#define LED_PIN                           13
+//#endif
+
+//#define SPINDLE_LASER_PWM_PIN               -1  // Hardware PWM
+//#define SPINDLE_LASER_ENA_PIN                4  // Pullup!
+
+// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
+//#define FILWIDTH_PIN                         5  // Analog Input
+
+//
+// LCD / Controller
+//
+
+//#if IS_RRD_SC
+
+#define LCD_PINS_RS                           -1
+#define LCD_PINS_ENABLE                       -1
+#define LCD_PINS_D4                           -1
+#define LCD_PINS_D5                           -1
+#define LCD_PINS_D6                           -1
+#define LCD_PINS_D7                           -1
+//#define BTN_EN1                             31
+//#define BTN_EN2                             33
+//#define BTN_ENC                             35
+#define SD_DETECT_PIN                         49
+//#ifndef KILL_PIN
+  //#define KILL_PIN                          41
+//#endif
+//#ifndef BEEPER_PIN
+#define BEEPER_PIN                            -1
+//#endif
+
+//#endif // IS_RRD_SC