diff options
Diffstat (limited to 'Marlin/src/pins/ramps/pins_ULTIMAIN_2.h')
| -rw-r--r-- | Marlin/src/pins/ramps/pins_ULTIMAIN_2.h | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h new file mode 100644 index 0000000..211cadd --- /dev/null +++ b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h @@ -0,0 +1,142 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Ultiboard v2.0 pin assignments + */ + +/** + * Rev B 2 JAN 2017 + * + * Added pin definitions for: + * M3, M4 & M5 spindle control commands + * case light + */ + +#if NOT_TARGET(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Ultimaker 2.x" +#define DEFAULT_MACHINE_NAME "Ultimaker" +#define DEFAULT_SOURCE_CODE_URL "github.com/Ultimaker/Marlin" + +// +// Limit Switches +// +#define X_STOP_PIN 22 +#define Y_STOP_PIN 26 +#define Z_STOP_PIN 29 + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 32 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 31 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 36 +#define Z_ENABLE_PIN 34 + +#define E0_STEP_PIN 42 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 37 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +#define MOTOR_CURRENT_PWM_XY_PIN 44 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 46 +// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range +#ifndef MOTOR_CURRENT_PWM_RANGE + #define MOTOR_CURRENT_PWM_RANGE 2000 +#endif +#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} + +// +// Temperature Sensors +// +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif + +#ifndef E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN 77 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define SD_DETECT_PIN 39 +#define LED_PIN 8 +#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered +#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. + +// +// LCD / Controller +// +#define BEEPER_PIN 18 + +#define LCD_PINS_RS 20 +#define LCD_PINS_ENABLE 15 +#define LCD_PINS_D4 14 +#define LCD_PINS_D5 21 +#define LCD_PINS_D6 5 +#define LCD_PINS_D7 6 + +// Buttons are directly attached +#define BTN_EN1 40 +#define BTN_EN2 41 +#define BTN_ENC 19 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if HAS_CUTTER // use the LED_PIN for spindle speed control or case light + #undef LED_PIN + #define SPINDLE_DIR_PIN 16 + #define SPINDLE_LASER_ENA_PIN 17 // Pullup! + #define SPINDLE_LASER_PWM_PIN 8 // Hardware PWM +#else + #undef LED_PIN + #define CASE_LIGHT_PIN 8 +#endif |