Initial commit

1 files changed, 142 insertions, 0 deletions

diff --git a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h
new file mode 100644
index 0000000..211cadd
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h
@@ -0,0 +1,142 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Ultiboard v2.0 pin assignments
+ */
+
+/**
+ * Rev B   2 JAN 2017
+ *
+ *  Added pin definitions for:
+ *    M3, M4 & M5 spindle control commands
+ *    case light
+ */
+
+#if NOT_TARGET(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME         "Ultimaker 2.x"
+#define DEFAULT_MACHINE_NAME    "Ultimaker"
+#define DEFAULT_SOURCE_CODE_URL "github.com/Ultimaker/Marlin"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            22
+#define Y_STOP_PIN                            26
+#define Z_STOP_PIN                            29
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            25
+#define X_DIR_PIN                             23
+#define X_ENABLE_PIN                          27
+
+#define Y_STEP_PIN                            32
+#define Y_DIR_PIN                             33
+#define Y_ENABLE_PIN                          31
+
+#define Z_STEP_PIN                            35
+#define Z_DIR_PIN                             36
+#define Z_ENABLE_PIN                          34
+
+#define E0_STEP_PIN                           42
+#define E0_DIR_PIN                            43
+#define E0_ENABLE_PIN                         37
+
+#define E1_STEP_PIN                           49
+#define E1_DIR_PIN                            47
+#define E1_ENABLE_PIN                         48
+
+#define MOTOR_CURRENT_PWM_XY_PIN              44
+#define MOTOR_CURRENT_PWM_Z_PIN               45
+#define MOTOR_CURRENT_PWM_E_PIN               46
+// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
+#ifndef MOTOR_CURRENT_PWM_RANGE
+  #define MOTOR_CURRENT_PWM_RANGE            2000
+#endif
+#define DEFAULT_PWM_MOTOR_CURRENT  {1300, 1300, 1250}
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             8  // Analog Input
+#define TEMP_1_PIN                             9  // Analog Input
+#define TEMP_BED_PIN                          10  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           2
+#define HEATER_1_PIN                           3
+#define HEATER_BED_PIN                         4
+
+#ifndef FAN_PIN
+  #define FAN_PIN                              7
+#endif
+
+#ifndef E0_AUTO_FAN_PIN
+  #define E0_AUTO_FAN_PIN                     77
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define SD_DETECT_PIN                         39
+#define LED_PIN                                8
+#define SAFETY_TRIGGERED_PIN                  28  // PIN to detect the safety circuit has triggered
+#define MAIN_VOLTAGE_MEASURE_PIN              14  // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
+
+//
+// LCD / Controller
+//
+#define BEEPER_PIN                            18
+
+#define LCD_PINS_RS                           20
+#define LCD_PINS_ENABLE                       15
+#define LCD_PINS_D4                           14
+#define LCD_PINS_D5                           21
+#define LCD_PINS_D6                            5
+#define LCD_PINS_D7                            6
+
+// Buttons are directly attached
+#define BTN_EN1                               40
+#define BTN_EN2                               41
+#define BTN_ENC                               19
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER                                    // use the LED_PIN for spindle speed control or case light
+  #undef LED_PIN
+  #define SPINDLE_DIR_PIN                     16
+  #define SPINDLE_LASER_ENA_PIN               17  // Pullup!
+  #define SPINDLE_LASER_PWM_PIN                8  // Hardware PWM
+#else
+  #undef LED_PIN
+  #define CASE_LIGHT_PIN                       8
+#endif