diff options
Diffstat (limited to 'Marlin/src/pins/sam/pins_ARCHIM1.h')
| -rw-r--r-- | Marlin/src/pins/sam/pins_ARCHIM1.h | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/Marlin/src/pins/sam/pins_ARCHIM1.h b/Marlin/src/pins/sam/pins_ARCHIM1.h new file mode 100644 index 0000000..57bbeb6 --- /dev/null +++ b/Marlin/src/pins/sam/pins_ARCHIM1.h @@ -0,0 +1,206 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * ARCHIM1 pin assignment + * + * The Archim 1.0 board requires Arduino Archim addons installed. + * + * - Add the following URL to Arduino IDE's Additional Board Manager URLs: + * https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json + * + * - In the Arduino IDE Board Manager search for Archim and install the package. + * + * - Change your target board to "Archim". + * + * Further information on the UltiMachine website... + * https://github.com/ultimachine/Archim/wiki + */ + +#if NOT_TARGET(__SAM3X8E__) + #error "Oops! Select 'Archim' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Archim 1.0" + +// +// Timers +// +// These are already defined in DUE, so must be undefined first +#define STEP_TIMER_NUM 3 +#define HAL_STEP_TIMER_ISR() void TC3_Handler() + +// +// Items marked * have been altered from Archim v1.0 +// + +// +// Servos +// +#define SERVO0_PIN 20 // D20 PB12 (Header J20 20) +#define SERVO1_PIN 21 // D21 PB13 (Header J20 19) + +// +// Limit Switches +// +#define X_MIN_PIN 14 // PD4 MIN ES1 +#define X_MAX_PIN 32 // PD10 MAX ES1 +#define Y_MIN_PIN 29 // PD6 MIN ES2 +#define Y_MAX_PIN 15 // PD5 MAX ES2 +#define Z_MIN_PIN 31 // PA7 MIN ES3 +#define Z_MAX_PIN 30 // PD9 MAX ES3 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 66 // D66 PB15 (Header J20 15) +#endif +#ifndef FIL_RUNOUT2_PIN + #define FIL_RUNOUT2_PIN 67 // D67 PB16 (Header J20 16) +#endif + +// +// Steppers +// +#define X_STEP_PIN 40 // PC8 STEP1 * +#define X_DIR_PIN 59 // PA4 DIR1 * +#define X_ENABLE_PIN 41 // PC9 EN1 + +#define Y_STEP_PIN 49 // PC14 STEP2 * +#define Y_DIR_PIN 47 // PC16 DIR2 * +#define Y_ENABLE_PIN 48 // PC15 EN2 * + +#define Z_STEP_PIN 36 // PC4 STEP Z * +#define Z_DIR_PIN 107 // PB10 DIR Z * +#define Z_ENABLE_PIN 96 // PC10 EN Z -AddOns * + +#define E0_STEP_PIN 78 // PB23 STEP3 * +#define E0_DIR_PIN 22 // PB26 DIR3 * +#define E0_ENABLE_PIN 97 // PB24 EN3 -Addons * + +#define E1_STEP_PIN 26 // PD1 STEP4 * +#define E1_DIR_PIN 27 // PD2 DIR4 * +#define E1_ENABLE_PIN 28 // PD3 EN4 * + +// Microstepping mode pins * +#define X_MS1_PIN 39 // PC7 MOD0E1 - As listed in schematic +#define X_MS2_PIN 38 // PC6 MOD1E1 +#define X_MS3_PIN 37 // PC5 MOD2E1 + +#define Y_MS1_PIN 50 // PC13 MODE0E2 +#define Y_MS2_PIN 51 // PC12 MODE1E2 +#define Y_MS3_PIN 92 // PC11 MODE2E2 - AddOns + +#define Z_MS1_PIN 44 // PC19 MOD0E Z +#define Z_MS2_PIN 45 // PC18 MOD1E Z +#define Z_MS3_PIN 46 // PC17 MOD2E Z + +#define E0_MS1_PIN 105 // PB22 MOD0E3 - AddOns +#define E0_MS2_PIN 106 // PC27 MOD1E3 - AddOns +#define E0_MS3_PIN 104 // PC20 MOD2E3 - AddOns + +#define E1_MS1_PIN 25 // PD0 MOD0E4 +#define E1_MS2_PIN 18 // PA11 MOD1E4 +#define E1_MS3_PIN 19 // PA10 MOD2E4 + +// Motor current PWM pins * +#define MOTOR_CURRENT_PWM_X_PIN 58 // PA6 X-REF TIOB2 +#define MOTOR_CURRENT_PWM_Y_PIN 12 // PD8 Y-REF TIOB8 +#define MOTOR_CURRENT_PWM_Z_PIN 10 // PC29 Z-REF TIOB7 +#define MOTOR_CURRENT_PWM_E0_PIN 3 // PC28 E1-REF TIOA7 +#define MOTOR_CURRENT_PWM_E1_PIN 11 // PD7 E2-REF TIOA8 + +#define MOTOR_CURRENT_PWM_RANGE 2750 // (3.3 Volts * 100000 Ohms) / (100000 Ohms + 20000 Ohms) = 2.75 Volts (max vref) +#define DEFAULT_PWM_MOTOR_CURRENT { 1000, 1000, 1000 } //, 1000, 1000} // X Y Z E0 E1, 1000 = 1000mAh + +// +// Temperature Sensors +// +#define TEMP_0_PIN 10 // D10 PB19 THERM AN1 * +#define TEMP_1_PIN 9 // D9 PB18 THERM AN2 * +#define TEMP_2_PIN 8 // D8 PB17 THERM AN4 * +#define TEMP_BED_PIN 11 // D11 PB20 THERM AN3 * + +// +// Heaters / Fans +// +#define HEATER_0_PIN 6 // D6 PC24 FET_PWM3 +#define HEATER_1_PIN 7 // D7 PC23 FET_PWM4 +#define HEATER_2_PIN 8 // D8 PC22 FET_PWM5 +#define HEATER_BED_PIN 9 // D9 PC21 BED_PWM + +#ifndef FAN_PIN + #define FAN_PIN 4 // D4 PC26 FET_PWM1 +#endif +#define FAN1_PIN 5 // D5 PC25 FET_PWM2 + +// +// Misc. Functions +// + +// Internal MicroSD card reader on the PCB +#define INT_SCK_PIN 42 // D42 PA19/MCCK +#define INT_MISO_PIN 43 // D43 PA20/MCCDA +#define INT_MOSI_PIN 73 // D73 PA21/MCDA0 +#define INT_SDSS 55 // D55 PA24/MCDA3 + +// External SD card reader on SC2 +#define SD_SCK_PIN 76 // D76 PA27 +#define SD_MISO_PIN 74 // D74 PA25 +#define SD_MOSI_PIN 75 // D75 PA26 +#define SDSS 87 // D87 PA29 + +// 2MB SPI Flash +#define SPI_FLASH_SS 52 // D52 PB21 + +// +// LCD / Controller +// +#if HAS_WIRED_LCD + #define BEEPER_PIN 23 // D24 PA15_CTS1 + #define LCD_PINS_RS 17 // D17 PA12_RXD1 + #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 + #define LCD_PINS_D4 69 // D69 PA0_CANTX0 + #define LCD_PINS_D5 54 // D54 PA16_SCK1 + #define LCD_PINS_D6 68 // D68 PA1_CANRX0 + #define LCD_PINS_D7 34 // D34 PC2_PWML0 + + #define SD_DETECT_PIN 2 // D2 PB25_TIOA0 + + #if IS_NEWPANEL + // Buttons on AUX-2 + #define BTN_EN1 60 // D60 PA3_TIOB1 + #define BTN_EN2 13 // D13 PB27_TIOB0 + #define BTN_ENC 16 // D16 PA13_TXD1 + #endif // IS_NEWPANEL + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + +#endif // HAS_WIRED_LCD |