diff options
Diffstat (limited to 'Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h')
| -rw-r--r-- | Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h new file mode 100644 index 0000000..c90ae84 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h @@ -0,0 +1,189 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#endif + +/** + * 2017 Victor Perez Marlin for stm32f1 test + */ + +#define BOARD_INFO_NAME "Chitu3D V5" +#define DEFAULT_MACHINE_NAME "STM32F103ZET6" + +#define BOARD_NO_NATIVE_USB + +#define DISABLE_JTAG + +// +// EEPROM +// +#define FLASH_EEPROM_EMULATION +#if ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE +#else + #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PG10 +#define Y_STOP_PIN PA12 +#define Z_STOP_PIN PA14 + +// +// Steppers +// +#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 + +#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 + +#define Z_ENABLE_PIN PE1 +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 + +#define E0_ENABLE_PIN PB8 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 + +#define E1_ENABLE_PIN PG8 +#define E1_STEP_PIN PC7 +#define E1_DIR_PIN PC6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA1 // TH1 +#define TEMP_BED_PIN PA0 // TB1 + +// +// Heaters +// +#define HEATER_0_PIN PG12 // HEATER1 +#define HEATER_BED_PIN PG11 // HOT BED + +// +// Fans +// +#define CONTROLLER_FAN_PIN PD6 // BOARD FAN +#define FAN_PIN PG13 // FAN +#define FAN2_PIN PG14 + +// +// Misc +// +#define BEEPER_PIN PB0 +//#define LED_PIN -1 +//#define POWER_LOSS_PIN -1 +#define FIL_RUNOUT_PIN PA15 + +// SPI Flash +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x200000 // 2MB +#endif + +// SPI 2 +#define W25QXX_CS_PIN PB12 +#define W25QXX_MOSI_PIN PB15 +#define W25QXX_MISO_PIN PB14 +#define W25QXX_SCK_PIN PB13 + +// +// TronXY TFT Support +// + +#if HAS_FSMC_TFT + + // Shared FSMC + + #define TOUCH_CS_PIN PB7 // SPI1_NSS + #define TOUCH_SCK_PIN PA5 // SPI1_SCK + #define TOUCH_MISO_PIN PA6 // SPI1_MISO + #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + + #define TFT_RESET_PIN PF11 + #define TFT_BACKLIGHT_PIN PD13 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PD11 + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + +#endif + +#if ENABLED(TFT_LVGL_UI) + // LVGL + #define HAS_SPI_FLASH_FONT 1 + #define HAS_GCODE_PREVIEW 1 + #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 + #define HAS_LANG_SELECT_SCREEN 1 + #define HAS_BAK_VIEW_IN_FLASH 0 + #define HAS_LOGO_IN_FLASH 0 +#elif ENABLED(TFT_COLOR_UI) + // Color UI + #define TFT_DRIVER ILI9488 + #define TFT_BUFFER_SIZE 14400 +#endif + +// XPT2046 Touch Screen calibration +#if ANY(TFT_LVGL_UI, TFT_COLOR_UI, TFT_CLASSIC_UI) + #ifndef TOUCH_CALIBRATION_X + #define TOUCH_CALIBRATION_X -17181 + #endif + #ifndef TOUCH_CALIBRATION_Y + #define TOUCH_CALIBRATION_Y 11434 + #endif + #ifndef TOUCH_OFFSET_X + #define TOUCH_OFFSET_X 501 + #endif + #ifndef TOUCH_OFFSET_Y + #define TOUCH_OFFSET_Y -9 + #endif +#endif + +// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available +// Needs to use SPI2 +#define SPI_DEVICE 2 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN PB14 +#define SD_MOSI_PIN PB15 +#define SD_SS_PIN PB12 + +// +// SD Card +// +#define SDIO_SUPPORT +#define SD_DETECT_PIN -1 // PF0, but it isn't connected +#define SDIO_CLOCK 4500000 +#define SDIO_READ_RETRIES 16 |