Initial commit

1 files changed, 189 insertions, 0 deletions

diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
new file mode 100644
index 0000000..c90ae84
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
@@ -0,0 +1,189 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(__STM32F1__)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+/**
+ * 2017 Victor Perez Marlin for stm32f1 test
+ */
+
+#define BOARD_INFO_NAME      "Chitu3D V5"
+#define DEFAULT_MACHINE_NAME "STM32F103ZET6"
+
+#define BOARD_NO_NATIVE_USB
+
+#define DISABLE_JTAG
+
+//
+// EEPROM
+//
+#define FLASH_EEPROM_EMULATION
+#if ENABLED(FLASH_EEPROM_EMULATION)
+  // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
+  #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
+  #define EEPROM_PAGE_SIZE     (0x800U)           // 2KB, but will use 2x more (4KB)
+  #define MARLIN_EEPROM_SIZE    EEPROM_PAGE_SIZE
+#else
+  #define MARLIN_EEPROM_SIZE              0x800U  // On SD, Limit to 2KB, require this amount of RAM
+#endif
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                          PG10
+#define Y_STOP_PIN                          PA12
+#define Z_STOP_PIN                          PA14
+
+//
+// Steppers
+//
+#define X_ENABLE_PIN                        PC13
+#define X_STEP_PIN                          PE5
+#define X_DIR_PIN                           PE6
+
+#define Y_ENABLE_PIN                        PE4
+#define Y_STEP_PIN                          PE2
+#define Y_DIR_PIN                           PE3
+
+#define Z_ENABLE_PIN                        PE1
+#define Z_STEP_PIN                          PB9
+#define Z_DIR_PIN                           PE0
+
+#define E0_ENABLE_PIN                       PB8
+#define E0_STEP_PIN                         PB4
+#define E0_DIR_PIN                          PB5
+
+#define E1_ENABLE_PIN                       PG8
+#define E1_STEP_PIN                         PC7
+#define E1_DIR_PIN                          PC6
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                          PA1   // TH1
+#define TEMP_BED_PIN                        PA0   // TB1
+
+//
+// Heaters
+//
+#define HEATER_0_PIN                        PG12  // HEATER1
+#define HEATER_BED_PIN                      PG11  // HOT BED
+
+//
+// Fans
+//
+#define CONTROLLER_FAN_PIN                  PD6   // BOARD FAN
+#define FAN_PIN                             PG13  // FAN
+#define FAN2_PIN                            PG14
+
+//
+// Misc
+//
+#define BEEPER_PIN                          PB0
+//#define LED_PIN                           -1
+//#define POWER_LOSS_PIN                    -1
+#define FIL_RUNOUT_PIN                      PA15
+
+// SPI Flash
+#define HAS_SPI_FLASH                          1
+#if HAS_SPI_FLASH
+  #define SPI_FLASH_SIZE                0x200000  // 2MB
+#endif
+
+// SPI 2
+#define W25QXX_CS_PIN                       PB12
+#define W25QXX_MOSI_PIN                     PB15
+#define W25QXX_MISO_PIN                     PB14
+#define W25QXX_SCK_PIN                      PB13
+
+//
+// TronXY TFT Support
+//
+
+#if HAS_FSMC_TFT
+
+  // Shared FSMC
+
+  #define TOUCH_CS_PIN                      PB7   // SPI1_NSS
+  #define TOUCH_SCK_PIN                     PA5   // SPI1_SCK
+  #define TOUCH_MISO_PIN                    PA6   // SPI1_MISO
+  #define TOUCH_MOSI_PIN                    PA7   // SPI1_MOSI
+
+  #define TFT_RESET_PIN                     PF11
+  #define TFT_BACKLIGHT_PIN                 PD13
+
+  #define LCD_USE_DMA_FSMC                        // Use DMA transfers to send data to the TFT
+  #define FSMC_CS_PIN                       PD7
+  #define FSMC_RS_PIN                       PD11
+  #define FSMC_DMA_DEV                      DMA2
+  #define FSMC_DMA_CHANNEL               DMA_CH5
+
+#endif
+
+#if ENABLED(TFT_LVGL_UI)
+  // LVGL
+  #define HAS_SPI_FLASH_FONT                   1
+  #define HAS_GCODE_PREVIEW                    1
+  #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH      0
+  #define HAS_LANG_SELECT_SCREEN               1
+  #define HAS_BAK_VIEW_IN_FLASH                0
+  #define HAS_LOGO_IN_FLASH                    0
+#elif ENABLED(TFT_COLOR_UI)
+  // Color UI
+  #define TFT_DRIVER                     ILI9488
+  #define TFT_BUFFER_SIZE                  14400
+#endif
+
+// XPT2046 Touch Screen calibration
+#if ANY(TFT_LVGL_UI, TFT_COLOR_UI, TFT_CLASSIC_UI)
+  #ifndef TOUCH_CALIBRATION_X
+    #define TOUCH_CALIBRATION_X           -17181
+  #endif
+  #ifndef TOUCH_CALIBRATION_Y
+    #define TOUCH_CALIBRATION_Y            11434
+  #endif
+  #ifndef TOUCH_OFFSET_X
+    #define TOUCH_OFFSET_X                   501
+  #endif
+  #ifndef TOUCH_OFFSET_Y
+    #define TOUCH_OFFSET_Y                    -9
+  #endif
+#endif
+
+// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
+// Needs to use SPI2
+#define SPI_DEVICE                             2
+#define SD_SCK_PIN                          PB13
+#define SD_MISO_PIN                         PB14
+#define SD_MOSI_PIN                         PB15
+#define SD_SS_PIN                           PB12
+
+//
+// SD Card
+//
+#define SDIO_SUPPORT
+#define SD_DETECT_PIN                       -1    // PF0, but it isn't connected
+#define SDIO_CLOCK                       4500000
+#define SDIO_READ_RETRIES                     16