diff options
Diffstat (limited to 'Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h')
| -rw-r--r-- | Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h new file mode 100644 index 0000000..4f02b0e --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h @@ -0,0 +1,132 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + + /** + * ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐ + * ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││ + * ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴ + * Pin assignments for 32-bit JGAurora A5S & A1 + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "JGAurora A5S A1 only supports one hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_INFO_NAME "JGAurora A5S A1" + +#define BOARD_NO_NATIVE_USB + +#ifndef STM32_XL_DENSITY + #define STM32_XL_DENSITY +#endif + +//#define MCU_STM32F103ZE // not yet required +// Enable EEPROM Emulation for this board, so that we don't overwrite factory data + +//#define I2C_EEPROM // AT24C64 +//#define MARLIN_EEPROM_SIZE 0x8000UL // 64KB + +//#define FLASH_EEPROM_EMULATION +//#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB +//#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL) + +// +// Limit Switches +// +#define X_STOP_PIN PC6 +#define Y_STOP_PIN PG8 +#define Z_STOP_PIN PG7 +//#define X_MAX_PIN PC5 +//#define Y_MAX_PIN PC4 +//#define Z_MAX_PIN PB0 + +// +// Steppers +// +#define X_STEP_PIN PD6 +#define X_DIR_PIN PD3 +#define X_ENABLE_PIN PG9 + +#define Y_STEP_PIN PG12 +#define Y_DIR_PIN PG11 +#define Y_ENABLE_PIN PG13 + +#define Z_STEP_PIN PG15 +#define Z_DIR_PIN PG14 +#define Z_ENABLE_PIN PB8 + +#define E0_STEP_PIN PE2 +#define E0_DIR_PIN PB9 +#define E0_ENABLE_PIN PE3 + +#define E1_STEP_PIN PE5 +#define E1_DIR_PIN PE4 +#define E1_ENABLE_PIN PE6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC2 +#define TEMP_BED_PIN PC1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA2 +#define HEATER_BED_PIN PA3 + +#define FAN_PIN PA1 + +#define FIL_RUNOUT_PIN PC7 + +// +// LCD +// +#define LCD_BACKLIGHT_PIN PF11 +#define FSMC_CS_PIN PD7 +#define FSMC_RS_PIN PG0 + +#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT +#define FSMC_DMA_DEV DMA2 +#define FSMC_DMA_CHANNEL DMA_CH5 + +// +// SD Card +// +#define SD_DETECT_PIN PF10 + +// +// Misc. +// +#define BEEPER_PIN PC3 // use PB7 to shut up if desired +#define LED_PIN PC13 + +// +// Touch support +// +#if NEED_TOUCH_PINS + #define TOUCH_CS_PIN PA4 + #define TOUCH_INT_PIN PC4 +#endif |