Initial commit

1 files changed, 132 insertions, 0 deletions

diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
new file mode 100644
index 0000000..4f02b0e
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
@@ -0,0 +1,132 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+ /**
+  *  ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
+  *  ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │  │ ││││
+  * ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚  └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
+  *   Pin assignments for 32-bit JGAurora A5S & A1
+  */
+
+#if NOT_TARGET(__STM32F1__)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#elif HOTENDS > 1 || E_STEPPERS > 1
+  #error "JGAurora A5S A1 only supports one hotend / E-stepper. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME "JGAurora A5S A1"
+
+#define BOARD_NO_NATIVE_USB
+
+#ifndef STM32_XL_DENSITY
+  #define STM32_XL_DENSITY
+#endif
+
+//#define MCU_STM32F103ZE // not yet required
+// Enable EEPROM Emulation for this board, so that we don't overwrite factory data
+
+//#define I2C_EEPROM                              // AT24C64
+//#define MARLIN_EEPROM_SIZE            0x8000UL  // 64KB
+
+//#define FLASH_EEPROM_EMULATION
+//#define MARLIN_EEPROM_SIZE            0x1000UL  // 4KB
+//#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL)
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                          PC6
+#define Y_STOP_PIN                          PG8
+#define Z_STOP_PIN                          PG7
+//#define X_MAX_PIN                         PC5
+//#define Y_MAX_PIN                         PC4
+//#define Z_MAX_PIN                         PB0
+
+//
+// Steppers
+//
+#define X_STEP_PIN                          PD6
+#define X_DIR_PIN                           PD3
+#define X_ENABLE_PIN                        PG9
+
+#define Y_STEP_PIN                          PG12
+#define Y_DIR_PIN                           PG11
+#define Y_ENABLE_PIN                        PG13
+
+#define Z_STEP_PIN                          PG15
+#define Z_DIR_PIN                           PG14
+#define Z_ENABLE_PIN                        PB8
+
+#define E0_STEP_PIN                         PE2
+#define E0_DIR_PIN                          PB9
+#define E0_ENABLE_PIN                       PE3
+
+#define E1_STEP_PIN                         PE5
+#define E1_DIR_PIN                          PE4
+#define E1_ENABLE_PIN                       PE6
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                          PC2
+#define TEMP_BED_PIN                        PC1
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PA2
+#define HEATER_BED_PIN                      PA3
+
+#define FAN_PIN                             PA1
+
+#define FIL_RUNOUT_PIN                      PC7
+
+//
+// LCD
+//
+#define LCD_BACKLIGHT_PIN                   PF11
+#define FSMC_CS_PIN                         PD7
+#define FSMC_RS_PIN                         PG0
+
+#define LCD_USE_DMA_FSMC                          // Use DMA transfers to send data to the TFT
+#define FSMC_DMA_DEV                        DMA2
+#define FSMC_DMA_CHANNEL                 DMA_CH5
+
+//
+// SD Card
+//
+#define SD_DETECT_PIN                       PF10
+
+//
+// Misc.
+//
+#define BEEPER_PIN                          PC3   // use PB7 to shut up if desired
+#define LED_PIN                             PC13
+
+//
+// Touch support
+//
+#if NEED_TOUCH_PINS
+  #define TOUCH_CS_PIN                      PA4
+  #define TOUCH_INT_PIN                     PC4
+#endif