diff options
Diffstat (limited to 'Marlin/src/pins/teensy2/pins_BRAINWAVE.h')
| -rw-r--r-- | Marlin/src/pins/teensy2/pins_BRAINWAVE.h | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h new file mode 100644 index 0000000..97d210a --- /dev/null +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h @@ -0,0 +1,126 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Brainwave 1.0 pin assignments (AT90USB646) + * + * Requires hardware bundle for Arduino: + * https://github.com/unrepentantgeek/brainwave-arduino + */ + +/** + * Rev B 16 JAN 2017 + * + * Added pointer to a currently available Arduino IDE extension that will + * allow this board to use the latest Marlin software + */ + +/** + * Rev C 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * Marlin_AT90USB - https://github.com/Bob-the-Kuhn/Marlin_AT90USB + * This is the only known IDE extension that is compatible with the pin definitions + * in this file, Adrduino 1.6.12 and the latest mainstream Marlin software. + * + * "Marlin_AT90USB" makes PWM0A available rather than the usual PWM1C. These PWMs share + * the same physical pin. Marlin uses TIMER1 to generate interrupts and sets it up such + * that PWM1A, PWM1B & PWM1C can't be used. + * + * Installation: + * + * 1. In the Arduino IDE, under Files -> Preferences paste the following URL + * https://rawgit.com/Bob-the-Kuhn/Marlin_AT90USB/master/package_MARLIN_AT90USB_index.json + * 2. Under Tools > Board -> Boards manager, scroll to the bottom, click on MARLIN_AT90USB + * and then click on "Install" + * 3. Select "AT90USB646_TEENSYPP" from the 'Tools > Board' menu. + */ + +/** + * To burn the bootloader that comes with Marlin_AT90USB: + * + * 1. Connect your programmer to the board. + * 2. In Arduino IDE select "AT90USB646_TEENSYPP" and then select the programmer. + * 3. In Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#if NOT_TARGET(__AVR_AT90USB646__) + #error "Oops! Select 'AT90USB646_TEENSYPP' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "Brainwave" + +// +// Limit Switches +// +#define X_STOP_PIN 35 // A7 +#define Y_STOP_PIN 34 // A6 +#define Z_STOP_PIN 33 // A5 + +// +// Steppers +// +#define X_STEP_PIN 3 // D3 +#define X_DIR_PIN 5 // D5 +#define X_ENABLE_PIN 4 // D4 +#define X_ATT_PIN 2 // D2 + +#define Y_STEP_PIN 7 // D7 +#define Y_DIR_PIN 9 // E1 +#define Y_ENABLE_PIN 8 // E0 +#define Y_ATT_PIN 6 // D6 + +#define Z_STEP_PIN 11 // C1 +#define Z_DIR_PIN 13 // C3 +#define Z_ENABLE_PIN 12 // C2 +#define Z_ATT_PIN 10 // C0 + +#define E0_STEP_PIN 15 // C5 +#define E0_DIR_PIN 17 // C7 +#define E0_ENABLE_PIN 16 // C6 +#define E0_ATT_PIN 14 // C4 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // F7 Analog Input +#define TEMP_BED_PIN 6 // F6 Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 32 // A4 Extruder +#define HEATER_BED_PIN 18 // E6 Bed + +#ifndef FAN_PIN + #define FAN_PIN 31 // A3 Fan +#endif + +// +// Misc. Functions +// +#define LED_PIN 19 // E7 |