Initial commit

1 files changed, 126 insertions, 0 deletions

diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h
new file mode 100644
index 0000000..97d210a
--- /dev/null
+++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h
@@ -0,0 +1,126 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Brainwave 1.0 pin assignments (AT90USB646)
+ *
+ * Requires hardware bundle for Arduino:
+ * https://github.com/unrepentantgeek/brainwave-arduino
+ */
+
+/**
+ *  Rev B  16 JAN 2017
+ *
+ *  Added pointer to a currently available Arduino IDE extension that will
+ *  allow this board to use the latest Marlin software
+ */
+
+/**
+ *  Rev C  2 JUN 2017
+ *
+ *  Converted to Arduino pin numbering
+ */
+
+/**
+ *  Marlin_AT90USB - https://github.com/Bob-the-Kuhn/Marlin_AT90USB
+ *    This is the only known IDE extension that is compatible with the pin definitions
+ *    in this file, Adrduino 1.6.12 and the latest mainstream Marlin software.
+ *
+ *    "Marlin_AT90USB" makes PWM0A available rather than the usual PWM1C. These PWMs share
+ *    the same physical pin. Marlin uses TIMER1 to generate interrupts and sets it up such
+ *    that PWM1A, PWM1B & PWM1C can't be used.
+ *
+ *  Installation:
+ *
+ *    1. In the Arduino IDE, under Files -> Preferences paste the following URL
+ *       https://rawgit.com/Bob-the-Kuhn/Marlin_AT90USB/master/package_MARLIN_AT90USB_index.json
+ *    2. Under Tools > Board -> Boards manager, scroll to the bottom, click on MARLIN_AT90USB
+ *       and then click on "Install"
+ *    3. Select "AT90USB646_TEENSYPP" from the 'Tools > Board' menu.
+ */
+
+/**
+ *  To burn the bootloader that comes with Marlin_AT90USB:
+ *
+ *    1. Connect your programmer to the board.
+ *    2. In Arduino IDE select "AT90USB646_TEENSYPP" and then select the programmer.
+ *    3. In Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
+ *    4. The programmer is no longer needed. Remove it.
+ */
+
+#if NOT_TARGET(__AVR_AT90USB646__)
+  #error "Oops! Select 'AT90USB646_TEENSYPP' in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "Brainwave"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            35  // A7
+#define Y_STOP_PIN                            34  // A6
+#define Z_STOP_PIN                            33  // A5
+
+//
+// Steppers
+//
+#define X_STEP_PIN                             3  // D3
+#define X_DIR_PIN                              5  // D5
+#define X_ENABLE_PIN                           4  // D4
+#define X_ATT_PIN                              2  // D2
+
+#define Y_STEP_PIN                             7  // D7
+#define Y_DIR_PIN                              9  // E1
+#define Y_ENABLE_PIN                           8  // E0
+#define Y_ATT_PIN                              6  // D6
+
+#define Z_STEP_PIN                            11  // C1
+#define Z_DIR_PIN                             13  // C3
+#define Z_ENABLE_PIN                          12  // C2
+#define Z_ATT_PIN                             10  // C0
+
+#define E0_STEP_PIN                           15  // C5
+#define E0_DIR_PIN                            17  // C7
+#define E0_ENABLE_PIN                         16  // C6
+#define E0_ATT_PIN                            14  // C4
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             7  // F7  Analog Input
+#define TEMP_BED_PIN                           6  // F6  Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          32  // A4 Extruder
+#define HEATER_BED_PIN                        18  // E6 Bed
+
+#ifndef FAN_PIN
+  #define FAN_PIN                             31  // A3 Fan
+#endif
+
+//
+// Misc. Functions
+//
+#define LED_PIN                               19  // E7