diff options
Diffstat (limited to 'Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h')
| -rw-r--r-- | Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h | 281 |
1 files changed, 281 insertions, 0 deletions
diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h new file mode 100644 index 0000000..d4f9fc7 --- /dev/null +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h @@ -0,0 +1,281 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + * + */ +#pragma once + +/** + * Rev B 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - https://www.pjrc.com/teensy/teensyduino.html + * Installation - https://www.pjrc.com/teensy/td_download.html + * + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu + * + * Note: With Teensyduino extension, the Arduino IDE will report 130048 bytes of program storage space available, + * but there is actually only 122880 bytes due to the larger DFU bootloader shipped by default on all Printrboard RevF. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools > Board' menu. + * + * Teensyduino is the most popular and easiest option. + */ + +/** + * To burn the bootloader that comes with Printrboard HID extension: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#if NOT_TARGET(__AVR_AT90USB1286__) + #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" +#endif + +#if !defined(__MARLIN_DEPS__) && !defined(USBCON) + #error "USBCON should be defined by the platform for this board." +#endif + +#define BOARD_INFO_NAME "Printrboard Rev.F" + +// Disable JTAG pins so EXP1 pins work correctly +// (Its pins are used for the Extrudrboard and filament sensor, for example). +#define DISABLE_JTAG + +/** + * Note that REV F6 of the Printrboard stole the A HOTEND pin and + * reassigned it to a second fan for the extruder heater. It's + * recommended that you swap the A and B outputs on the Extrudrboard + * so EXTRUDERS=2 will still work on F6, using B for E1/HEATER_1/TEMP_1. + * See https://printrbot.zendesk.com/hc/en-us/articles/115003072346 + * + * If you have REV F6 you probably also want to set E0_AUTO_FAN_PIN + * to PRINTRBOARD_F6_HEATER_FAN_PIN (44). + * + * Define NO_EXTRUDRBOARD if you don't have an EXTRUDRBOARD and wish to + * reassign different functions to EXP1. + * + * Define NO_EXTRUDRBOARD_OUTPUT_SWAP if you have a REV F5 or lower and + * want to use EXTRUDRBOARD A for E1 and EXTRUDRBOARD B for E2. + */ +//#define NO_EXTRUDRBOARD +//#define NO_EXTRUDRBOARD_OUTPUT_SWAP + +// +// Limit Switches +// +#define X_STOP_PIN 47 // E3 +#define Y_STOP_PIN 24 // B4 PWM2A +#define Z_STOP_PIN 36 // E4 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 + +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 + +#if DISABLED(NO_EXTRUDRBOARD) +#if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP) + #define E1_STEP_PIN 25 // B5 + #define E1_DIR_PIN 37 // E5 + #define E1_ENABLE_PIN 42 // F4 + + #define E2_STEP_PIN 2 // D2 + #define E2_DIR_PIN 3 // D3 + #define E2_ENABLE_PIN 43 // F5 +#else + #define E1_STEP_PIN 2 // D2 + #define E1_DIR_PIN 3 // D3 + #define E1_ENABLE_PIN 43 // F5 + + #define E2_STEP_PIN 25 // B5 + #define E2_DIR_PIN 37 // E5 + #define E2_ENABLE_PIN 42 // F4 +#endif +#endif // NO_EXTRUDRBOARD + +// Enable control of stepper motor currents with the I2C based MCP4728 DAC used on Printrboard REVF +#define HAS_MOTOR_CURRENT_DAC + +// Set default drive strength percents if not already defined - X, Y, Z, E axis +#ifndef DAC_MOTOR_CURRENT_DEFAULT + #define DAC_MOTOR_CURRENT_DEFAULT { 70, 70, 50, 70 } +#endif + +// Number of channels available for DAC +#define DAC_STEPPER_ORDER { 3, 2, 1, 0 } + +#define DAC_STEPPER_SENSE 0.11 +#define DAC_STEPPER_ADDRESS 0 +#define DAC_STEPPER_MAX 3520 +#define DAC_STEPPER_VREF 1 // internal Vref, gain 1x = 2.048V +#define DAC_STEPPER_GAIN 0 +#define DAC_OR_ADDRESS 0x00 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // Analog Input (Extruder) +#define TEMP_BED_PIN 0 // Analog Input (Bed) + +#if DISABLED(NO_EXTRUDRBOARD) +#if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP) + #define TEMP_1_PIN 2 // Analog Input (Extrudrboard A THERM) + #define TEMP_2_PIN 3 // Analog Input (Extrudrboard B THERM) +#else + #define TEMP_1_PIN 3 // Analog Input (Extrudrboard B THERM) + #define TEMP_2_PIN 2 // Analog Input (Extrudrboard A THERM) +#endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C + +#if DISABLED(NO_EXTRUDRBOARD) +#if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP) + #define HEATER_1_PIN 44 // F6 - Extrudrboard A HOTEND + #define HEATER_2_PIN 45 // F7 - Extrudrboard B HOTEND +#else + #define HEATER_1_PIN 45 // F7 - Extrudrboard B HOTEND + #define HEATER_2_PIN 44 // F6 - Extrudrboard A HOTEND +#endif +#endif + +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A +#endif + +// +// LCD / Controller +// +//#define USE_INTERNAL_SD + +#if HAS_WIRED_LCD + #define LCD_PINS_RS 9 // E1 JP11-11 + #define LCD_PINS_ENABLE 8 // E0 JP11-10 + #define LCD_PINS_D4 7 // D7 JP11-8 + #define LCD_PINS_D5 6 // D6 JP11-7 + #define LCD_PINS_D6 5 // D5 JP11-6 + #define LCD_PINS_D7 4 // D4 JP11-5 + + #if ANY(VIKI2, miniVIKI) + + #define BEEPER_PIN 8 // E0 JP11-10 + #define DOGLCD_A0 40 // F2 JP2-2 + #define DOGLCD_CS 41 // F3 JP2-4 + #define LCD_SCREEN_ROT_180 + + #define BTN_EN1 2 // D2 TX1 JP2-5 + #define BTN_EN2 3 // D3 RX1 JP2-7 + #define BTN_ENC 45 // F7 TDI JP2-12 + + #define SDSS 3 // F5 TMS JP2-8 + + #define STAT_LED_RED_PIN 12 // C2 JP11-14 + #define STAT_LED_BLUE_PIN 10 // C0 JP11-12 + + #elif ENABLED(MINIPANEL) + + #if DISABLED(USE_INTERNAL_SD) + // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN# + #define SDSS 11 // 36 C1 EXP2-13 EXP2-07 + #define SD_DETECT_PIN 9 // 34 E1 EXP2-11 EXP2-04 + #endif + + // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN# + #define DOGLCD_A0 4 // 29 D4 EXP2-05 EXP1-04 + #define DOGLCD_CS 5 // 30 D5 EXP2-06 EXP1-05 + #define BTN_ENC 6 // 31 D6 EXP2-07 EXP1-09 + #define BEEPER_PIN 7 // 32 D7 EXP2-08 EXP1-10 + #define KILL_PIN 8 // 33 E0 EXP2-10 EXP2-03 + #define BTN_EN1 10 // 35 C0 EXP2-12 EXP2-06 + #define BTN_EN2 12 // 37 C2 EXP2-14 EXP2-08 + //#define LCD_BACKLIGHT_PIN 43 // 56 F5 EXP1-12 Not Implemented + //#define SCK 21 // 11 B1 ICSP-04 EXP2-09 + //#define MOSI 22 // 12 B2 ICSP-03 EXP2-05 + //#define MISO 23 // 13 B3 ICSP-06 EXP2-05 + + // Alter timing for graphical display + #define BOARD_ST7920_DELAY_1 DELAY_NS(313) + #define BOARD_ST7920_DELAY_2 DELAY_NS(313) + #define BOARD_ST7920_DELAY_3 DELAY_NS(313) + + #else + + #define BTN_EN1 10 // C0 JP11-12 + #define BTN_EN2 11 // C1 JP11-13 + #define BTN_ENC 12 // C2 JP11-14 + + #endif + +#endif + +// +// Misc. Functions +// +// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. +#ifndef SDSS + #define SDSS 20 // 10 B0 +#endif + +/** + * This is EXP1-2, which is also the TEMP_A_PIN for the Extrudrboard. + * If using w/ Extrudrboard, cut off pin 2 on the Extrudrboard male + * connector to ensure this is disconnected from the A THERM pullups. + * You probably want to set EXTRUDERS=2 and swap the Extrudrboard outputs, + * which will let you use Channel B on the Extrudrboard as E1. + */ +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 2 // Analog Input +#endif |