Initial commit

1 files changed, 281 insertions, 0 deletions

diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h
new file mode 100644
index 0000000..d4f9fc7
--- /dev/null
+++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h
@@ -0,0 +1,281 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ *  Rev B  2 JUN 2017
+ *
+ *  Converted to Arduino pin numbering
+ */
+
+/**
+ *  There are two Arduino IDE extensions that are compatible with this board
+ *  and with the mainstream Marlin software.
+ *
+ *  Teensyduino -  https://www.pjrc.com/teensy/teensyduino.html
+ *  Installation - https://www.pjrc.com/teensy/td_download.html
+ *
+ *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
+ *
+ *    Note: With Teensyduino extension, the Arduino IDE will report 130048 bytes of program storage space available,
+ *    but there is actually only 122880 bytes due to the larger DFU bootloader shipped by default on all Printrboard RevF.
+ *
+ *  Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
+ *
+ *    Installation:
+ *
+ *       1. Go to the above URL, click on the "Clone or Download" button and then
+ *          click on "Download ZIP" button.
+ *       2. Unzip the file, find the "printrboard" directory and then copy it to the
+ *          hardware directory in Arduino.  The Arduino hardware directory will probably
+ *          be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
+ *       3. Restart Arduino.
+ *       4. Select "Printrboard" from the 'Tools > Board' menu.
+ *
+ *  Teensyduino is the most popular and easiest option.
+ */
+
+/**
+ *  To burn the bootloader that comes with Printrboard HID extension:
+ *
+ *   1. Connect your programmer to the board.
+ *   2. In the Arduino IDE select "Printrboard" and then select the programmer.
+ *   3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
+ *   4. The programmer is no longer needed. Remove it.
+ */
+
+#if NOT_TARGET(__AVR_AT90USB1286__)
+  #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
+#endif
+
+#if !defined(__MARLIN_DEPS__) && !defined(USBCON)
+  #error "USBCON should be defined by the platform for this board."
+#endif
+
+#define BOARD_INFO_NAME "Printrboard Rev.F"
+
+// Disable JTAG pins so EXP1 pins work correctly
+// (Its pins are used for the Extrudrboard and filament sensor, for example).
+#define DISABLE_JTAG
+
+/**
+ * Note that REV F6 of the Printrboard stole the A HOTEND pin and
+ * reassigned it to a second fan for the extruder heater.  It's
+ * recommended that you swap the A and B outputs on the Extrudrboard
+ * so EXTRUDERS=2 will still work on F6, using B for E1/HEATER_1/TEMP_1.
+ * See https://printrbot.zendesk.com/hc/en-us/articles/115003072346
+ *
+ * If you have REV F6 you probably also want to set E0_AUTO_FAN_PIN
+ * to PRINTRBOARD_F6_HEATER_FAN_PIN (44).
+ *
+ * Define NO_EXTRUDRBOARD if you don't have an EXTRUDRBOARD and wish to
+ * reassign different functions to EXP1.
+ *
+ * Define NO_EXTRUDRBOARD_OUTPUT_SWAP if you have a REV F5 or lower and
+ * want to use EXTRUDRBOARD A for E1 and EXTRUDRBOARD B for E2.
+ */
+//#define NO_EXTRUDRBOARD
+//#define NO_EXTRUDRBOARD_OUTPUT_SWAP
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            47  // E3
+#define Y_STOP_PIN                            24  // B4 PWM2A
+#define Z_STOP_PIN                            36  // E4
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            28  // A0
+#define X_DIR_PIN                             29  // A1
+#define X_ENABLE_PIN                          19  // E7
+
+#define Y_STEP_PIN                            30  // A2
+#define Y_DIR_PIN                             31  // A3
+#define Y_ENABLE_PIN                          18  // E6
+
+#define Z_STEP_PIN                            32  // A4
+#define Z_DIR_PIN                             33  // A5
+#define Z_ENABLE_PIN                          17  // C7
+
+#define E0_STEP_PIN                           34  // A6
+#define E0_DIR_PIN                            35  // A7
+#define E0_ENABLE_PIN                         13  // C3
+
+#if DISABLED(NO_EXTRUDRBOARD)
+#if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP)
+  #define E1_STEP_PIN                         25  // B5
+  #define E1_DIR_PIN                          37  // E5
+  #define E1_ENABLE_PIN                       42  // F4
+
+  #define E2_STEP_PIN                          2  // D2
+  #define E2_DIR_PIN                           3  // D3
+  #define E2_ENABLE_PIN                       43  // F5
+#else
+  #define E1_STEP_PIN                          2  // D2
+  #define E1_DIR_PIN                           3  // D3
+  #define E1_ENABLE_PIN                       43  // F5
+
+  #define E2_STEP_PIN                         25  // B5
+  #define E2_DIR_PIN                          37  // E5
+  #define E2_ENABLE_PIN                       42  // F4
+#endif
+#endif // NO_EXTRUDRBOARD
+
+// Enable control of stepper motor currents with the I2C based MCP4728 DAC used on Printrboard REVF
+#define HAS_MOTOR_CURRENT_DAC
+
+// Set default drive strength percents if not already defined - X, Y, Z, E axis
+#ifndef DAC_MOTOR_CURRENT_DEFAULT
+  #define DAC_MOTOR_CURRENT_DEFAULT { 70, 70, 50, 70 }
+#endif
+
+// Number of channels available for DAC
+#define DAC_STEPPER_ORDER { 3, 2, 1, 0 }
+
+#define DAC_STEPPER_SENSE    0.11
+#define DAC_STEPPER_ADDRESS                    0
+#define DAC_STEPPER_MAX                      3520
+#define DAC_STEPPER_VREF                       1  // internal Vref, gain 1x = 2.048V
+#define DAC_STEPPER_GAIN                       0
+#define DAC_OR_ADDRESS                      0x00
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             1  // Analog Input (Extruder)
+#define TEMP_BED_PIN                           0  // Analog Input (Bed)
+
+#if DISABLED(NO_EXTRUDRBOARD)
+#if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP)
+  #define TEMP_1_PIN                           2  // Analog Input (Extrudrboard A THERM)
+  #define TEMP_2_PIN                           3  // Analog Input (Extrudrboard B THERM)
+#else
+  #define TEMP_1_PIN                           3  // Analog Input (Extrudrboard B THERM)
+  #define TEMP_2_PIN                           2  // Analog Input (Extrudrboard A THERM)
+#endif
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          15  // C5 PWM3B - Extruder
+#define HEATER_BED_PIN                        14  // C4 PWM3C
+
+#if DISABLED(NO_EXTRUDRBOARD)
+#if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP)
+  #define HEATER_1_PIN                        44  // F6 - Extrudrboard A HOTEND
+  #define HEATER_2_PIN                        45  // F7 - Extrudrboard B HOTEND
+#else
+  #define HEATER_1_PIN                        45  // F7 - Extrudrboard B HOTEND
+  #define HEATER_2_PIN                        44  // F6 - Extrudrboard A HOTEND
+#endif
+#endif
+
+#ifndef FAN_PIN
+  #define FAN_PIN                             16  // C6 PWM3A
+#endif
+
+//
+// LCD / Controller
+//
+//#define USE_INTERNAL_SD
+
+#if HAS_WIRED_LCD
+  #define LCD_PINS_RS                          9  // E1       JP11-11
+  #define LCD_PINS_ENABLE                      8  // E0       JP11-10
+  #define LCD_PINS_D4                          7  // D7       JP11-8
+  #define LCD_PINS_D5                          6  // D6       JP11-7
+  #define LCD_PINS_D6                          5  // D5       JP11-6
+  #define LCD_PINS_D7                          4  // D4       JP11-5
+
+  #if ANY(VIKI2, miniVIKI)
+
+    #define BEEPER_PIN                         8  // E0       JP11-10
+    #define DOGLCD_A0                         40  // F2       JP2-2
+    #define DOGLCD_CS                         41  // F3       JP2-4
+    #define LCD_SCREEN_ROT_180
+
+    #define BTN_EN1                            2  // D2 TX1   JP2-5
+    #define BTN_EN2                            3  // D3 RX1   JP2-7
+    #define BTN_ENC                           45  // F7 TDI   JP2-12
+
+    #define SDSS                               3  // F5 TMS   JP2-8
+
+    #define STAT_LED_RED_PIN                  12  // C2       JP11-14
+    #define STAT_LED_BLUE_PIN                 10  // C0       JP11-12
+
+  #elif ENABLED(MINIPANEL)
+
+    #if DISABLED(USE_INTERNAL_SD)
+      //      PIN       FASTIO PIN#  ATUSB90 PIN# Teensy2.0++ PIN#  Printrboard RevF Conn.   MKSLCD12864 PIN#
+      #define SDSS                            11  //      36               C1                EXP2-13             EXP2-07
+      #define SD_DETECT_PIN                    9  //      34               E1                EXP2-11             EXP2-04
+    #endif
+
+    //      PIN       FASTIO PIN#  ATUSB90 PIN# Teensy2.0++ PIN#  Printrboard RevF Conn.   MKSLCD12864 PIN#
+    #define DOGLCD_A0                          4  //       29               D4                EXP2-05             EXP1-04
+    #define DOGLCD_CS                          5  //       30               D5                EXP2-06             EXP1-05
+    #define BTN_ENC                            6  //       31               D6                EXP2-07             EXP1-09
+    #define BEEPER_PIN                         7  //       32               D7                EXP2-08             EXP1-10
+    #define KILL_PIN                           8  //       33               E0                EXP2-10             EXP2-03
+    #define BTN_EN1                           10  //       35               C0                EXP2-12             EXP2-06
+    #define BTN_EN2                           12  //       37               C2                EXP2-14             EXP2-08
+    //#define LCD_BACKLIGHT_PIN               43  //    56               F5                EXP1-12     Not Implemented
+    //#define SCK                             21  //         11               B1                ICSP-04             EXP2-09
+    //#define MOSI                            22  //         12               B2                ICSP-03             EXP2-05
+    //#define MISO                            23  //         13               B3                ICSP-06             EXP2-05
+
+    // Alter timing for graphical display
+    #define BOARD_ST7920_DELAY_1 DELAY_NS(313)
+    #define BOARD_ST7920_DELAY_2 DELAY_NS(313)
+    #define BOARD_ST7920_DELAY_3 DELAY_NS(313)
+
+  #else
+
+    #define BTN_EN1                           10  // C0       JP11-12
+    #define BTN_EN2                           11  // C1       JP11-13
+    #define BTN_ENC                           12  // C2       JP11-14
+
+  #endif
+
+#endif
+
+//
+// Misc. Functions
+//
+//      PIN       FASTIO PIN#  ATUSB90 PIN# Teensy2.0++ PIN#  Printrboard RevF Conn.
+#ifndef SDSS
+  #define SDSS                                20  //       10               B0
+#endif
+
+/**
+ * This is EXP1-2, which is also the TEMP_A_PIN for the Extrudrboard.
+ * If using w/ Extrudrboard, cut off pin 2 on the Extrudrboard male
+ * connector to ensure this is disconnected from the A THERM pullups.
+ * You probably want to set EXTRUDERS=2 and swap the Extrudrboard outputs,
+ * which will let you use Channel B on the Extrudrboard as E1.
+ */
+#ifndef FILWIDTH_PIN
+  #define FILWIDTH_PIN                         2  // Analog Input
+#endif