Initial commit

1 files changed, 164 insertions, 0 deletions

diff --git a/Marlin/src/pins/ramps/pins_3DRAG.h b/Marlin/src/pins/ramps/pins_3DRAG.h
new file mode 100644
index 0000000..6c7f7f4
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_3DRAG.h
@@ -0,0 +1,164 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments
+ */
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "3Drag"
+#endif
+
+#ifndef DEFAULT_MACHINE_NAME
+  #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
+#endif
+
+#ifndef DEFAULT_SOURCE_CODE_URL
+  #define DEFAULT_SOURCE_CODE_URL "3dprint.elettronicain.it"
+#endif
+
+//
+// Heaters / Fans
+//
+#define RAMPS_D8_PIN                           9
+#define RAMPS_D9_PIN                           8
+#define MOSFET_D_PIN                          12
+
+#ifndef CASE_LIGHT_PIN
+  #define CASE_LIGHT_PIN                      -1  // Hardware PWM but one is not available on expansion header
+#endif
+
+#include "pins_RAMPS.h"
+
+//
+// Limit Switches
+//
+#undef Z_MAX_PIN
+
+//
+// Steppers
+//
+#undef Z_ENABLE_PIN
+#define Z_ENABLE_PIN                          63
+
+//
+// Heaters / Fans
+//
+#define HEATER_2_PIN                           6
+
+//
+// Misc. Functions
+//
+#undef SDSS
+#define SDSS                                  25
+
+#undef SD_DETECT_PIN
+#define SD_DETECT_PIN                         53
+
+//
+// LCD / Controller
+//
+#if IS_ULTRA_LCD && IS_NEWPANEL
+  #undef BEEPER_PIN
+
+  #undef LCD_PINS_RS
+  #undef LCD_PINS_ENABLE
+  #undef LCD_PINS_D4
+  #undef LCD_PINS_D5
+  #undef LCD_PINS_D6
+  #undef LCD_PINS_D7
+  #define LCD_PINS_RS                         27
+  #define LCD_PINS_ENABLE                     29
+  #define LCD_PINS_D4                         37
+  #define LCD_PINS_D5                         35
+  #define LCD_PINS_D6                         33
+  #define LCD_PINS_D7                         31
+
+  // Buttons
+  #undef BTN_EN1
+  #undef BTN_EN2
+  #undef BTN_ENC
+  #define BTN_EN1                             16
+  #define BTN_EN2                             17
+  #define BTN_ENC                             23
+
+#else
+
+  #define BEEPER_PIN                          33
+
+#endif // IS_ULTRA_LCD && IS_NEWPANEL
+
+/**
+ *  M3/M4/M5 - Spindle/Laser Control
+ *
+ *  If you want to control the speed of your spindle then you'll have
+ *  have to sacrifce the Extruder and pull some signals off the Z stepper
+ *  driver socket.
+ *
+ *  The following assumes:
+ *   - the Z stepper driver socket is empty
+ *   - the extruder driver socket has a driver board plugged into it
+ *   - the Z stepper wires are attached the the extruder connector
+ *
+ *  If you want to keep the extruder AND don't have a LCD display then
+ *  you can still control the power on/off and spindle direction.
+ *
+ *  Where to get spindle signals
+ *
+ *      stepper signal           socket name       socket name
+ *                                          -------
+ *       SPINDLE_LASER_ENA_PIN    /ENABLE  O|     |O  VMOT
+ *                                    MS1  O|     |O  GND
+ *                                    MS2  O|     |O  2B
+ *                                    MS3  O|     |O  2A
+ *                                 /RESET  O|     |O  1A
+ *                                 /SLEEP  O|     |O  1B
+ *          SPINDLE_LASER_PWM_PIN    STEP  O|     |O  VDD
+ *                SPINDLE_DIR_PIN     DIR  O|     |O  GND
+ *                                          -------
+ *
+ *  Note: Socket names vary from vendor to vendor
+ */
+#undef SPINDLE_LASER_PWM_PIN                      // Definitions in pins_RAMPS.h are not good with 3DRAG
+#undef SPINDLE_LASER_ENA_PIN
+#undef SPINDLE_DIR_PIN
+
+#if HAS_CUTTER
+  #if !EXTRUDERS
+    #undef E0_DIR_PIN
+    #undef E0_ENABLE_PIN
+    #undef E0_STEP_PIN
+    #undef Z_DIR_PIN
+    #undef Z_ENABLE_PIN
+    #undef Z_STEP_PIN
+    #define Z_DIR_PIN                         28
+    #define Z_ENABLE_PIN                      24
+    #define Z_STEP_PIN                        26
+    #define SPINDLE_LASER_PWM_PIN             46  // Hardware PWM
+    #define SPINDLE_LASER_ENA_PIN             62  // Pullup!
+    #define SPINDLE_DIR_PIN                   48
+  #elif !BOTH(IS_ULTRA_LCD, IS_NEWPANEL)          // Use expansion header if no LCD in use
+    #define SPINDLE_LASER_ENA_PIN             16  // Pullup or pulldown!
+    #define SPINDLE_DIR_PIN                   17
+  #endif
+#endif