Initial commit

1 files changed, 147 insertions, 0 deletions

diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h
new file mode 100644
index 0000000..08dd0f4
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h
@@ -0,0 +1,147 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Arduino Mega with RAMPS v1.4 adjusted pin assignments
+ *
+ *  MKS GEN v1.3  (Extruder, Fan, Bed)
+ *  MKS GEN v1.3  (Extruder, Extruder, Fan, Bed)
+ *  MKS GEN v1.4  (Extruder, Fan, Bed)
+ *  MKS GEN v1.4  (Extruder, Extruder, Fan, Bed)
+ */
+
+#if HOTENDS > 2 || E_STEPPERS > 2
+  #error "MKS GEN 1.3/1.4 supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME "MKS GEN >= v1.3"
+
+//
+// Heaters / Fans
+//
+// Power outputs EFBF or EFBE
+#define MOSFET_D_PIN                           7
+
+//
+// PSU / SERVO
+//
+// If PSU_CONTROL is specified, always hijack Servo 3
+//
+#if ENABLED(PSU_CONTROL)
+  #define SERVO3_PIN                          -1
+  #define PS_ON_PIN                            4
+#endif
+
+#include "pins_RAMPS.h"
+
+//
+// LCD / Controller
+//
+#if ANY(VIKI2, miniVIKI)
+  /**
+   * VIKI2 Has two groups of wires with...
+   *
+   * +Vin     + Input supply, requires 120ma for LCD and mSD card
+   * GND      Ground Pin
+   * MOSI     Data input for LCD and SD
+   * MISO     Data output for SD
+   * SCK      Clock for LCD and SD
+   * AO       Reg. Sel for LCD
+   * LCS      Chip Select for LCD
+   * SDCS     Chip Select for SD
+   * SDCD     Card Detect pin for SD
+   * ENCA     Encoder output A
+   * ENCB     Encoder output B
+   * ENCBTN   Encoder button switch
+   *
+   * BTN      Panel mounted button switch
+   * BUZZER   Piezo buzzer
+   * BLUE-LED Blue LED ring pin (3 to 5v, mosfet buffered)
+   * RED-LED  Red LED ring pin (3 to 5v, mosfet buffered)
+   *
+   * This configuration uses the following arrangement:
+   *
+   * EXP1 D37 = EN2   D35 = EN1     EXP2 D50 = MISO  D52 = SCK
+   *      D17 = BLUE  D16 = RED          D31 = ENC   D53 = SDCS
+   *      D23 = KILL  D25 = BUZZ         D33 = ---   D51 = MOSI
+   *      D27 = A0    D29 = LCS          D49 = SDCD  RST = ---
+   *      GND = GND   5V  = 5V           GND = ---   D41 = ---
+   */
+
+  #undef BTN_EN1
+  #undef BTN_EN2
+  #undef BTN_ENC
+  #undef DOGLCD_A0
+  #undef DOGLCD_CS
+  #undef SD_DETECT_PIN
+  #undef BEEPER_PIN
+  #undef KILL_PIN
+  #undef STAT_LED_RED_PIN
+  #undef STAT_LED_BLUE_PIN
+
+  //
+  // VIKI2 12-wire lead
+  //
+
+  // orange/white          SDCD
+  #define SD_DETECT_PIN                       49
+
+  // white                 ENCA
+  #define BTN_EN1                             35
+
+  // green                 ENCB
+  #define BTN_EN2                             37
+
+  // purple                ENCBTN
+  #define BTN_ENC                             31
+
+  // brown                 A0
+  #define DOGLCD_A0                           27
+
+  // green/white           LCS
+  #define DOGLCD_CS                           29
+
+                        // 50    gray   MISO
+                        // 51    yellow MOSI
+                        // 52    orange SCK
+
+  // blue                  SDCS
+  //#define SDSS                              53
+
+  //
+  // VIKI2 4-wire lead
+  //
+
+  // blue                  BTN
+  #define KILL_PIN                            23
+
+  // green                 BUZZER
+  #define BEEPER_PIN                          25
+
+  // yellow                RED-LED
+  #define STAT_LED_RED_PIN                    16
+
+  // white                 BLUE-LED
+  #define STAT_LED_BLUE_PIN                   17
+
+#endif