Initial commit

1 files changed, 519 insertions, 0 deletions

diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h
new file mode 100644
index 0000000..ca40255
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h
@@ -0,0 +1,519 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#if HOTENDS > 5 || E_STEPPERS > 5
+  #error "TTOSCAR supports up to 5 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME      "TT OSCAR"
+#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
+
+//
+// Servos
+//
+#define SERVO0_PIN                            11
+#define SERVO1_PIN                            12
+#define SERVO2_PIN                             5
+#define SERVO3_PIN                             4
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                              3
+#define X_MAX_PIN                              2
+#define Y_MIN_PIN                             14
+#define Y_MAX_PIN                             15
+#define Z_MIN_PIN                             18
+#define Z_MAX_PIN                             19
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN             SERVO3_PIN
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            54
+#define X_DIR_PIN                             55
+#define X_ENABLE_PIN                          38
+#define X_CS_PIN                              57
+
+#define Y_STEP_PIN                            60
+#define Y_DIR_PIN                             61
+#define Y_ENABLE_PIN                          56
+#define Y_CS_PIN                              58
+
+#define Z_STEP_PIN                            46
+#define Z_DIR_PIN                             48
+#define Z_ENABLE_PIN                          62
+#define Z_CS_PIN                              53
+
+#define E0_STEP_PIN                           26
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         24
+#define E0_CS_PIN                             49
+
+#define E1_STEP_PIN                           36
+#define E1_DIR_PIN                            34
+#define E1_ENABLE_PIN                         30
+#define E1_CS_PIN                      E0_CS_PIN
+
+#define E2_STEP_PIN                           63
+#define E2_DIR_PIN                            22
+#define E2_ENABLE_PIN                         59
+#define E2_CS_PIN                      E0_CS_PIN
+
+#define E3_STEP_PIN                           32
+#define E3_DIR_PIN                            40
+#define E3_ENABLE_PIN                         39
+#define E3_CS_PIN                      E0_CS_PIN
+
+#define E4_STEP_PIN                           43
+#define E4_DIR_PIN                            42
+#define E4_ENABLE_PIN                         47
+#define E4_CS_PIN                      E0_CS_PIN
+
+#if HAS_TMC_UART
+  /**
+   * TMC2208/TMC2209 stepper drivers
+   *
+   * Hardware serial communication ports.
+   * If undefined software serial is used according to the pins below
+   */
+  //#define X_HARDWARE_SERIAL  Serial1
+  //#define X2_HARDWARE_SERIAL Serial1
+  //#define Y_HARDWARE_SERIAL  Serial1
+  //#define Y2_HARDWARE_SERIAL Serial1
+  //#define Z_HARDWARE_SERIAL  Serial1
+  //#define Z2_HARDWARE_SERIAL Serial1
+  //#define E0_HARDWARE_SERIAL Serial1
+  //#define E1_HARDWARE_SERIAL Serial1
+  //#define E2_HARDWARE_SERIAL Serial1
+  //#define E3_HARDWARE_SERIAL Serial1
+  //#define E3_HARDWARE_SERIAL Serial1
+
+  //
+  // Software serial
+  //
+
+  #define X_SERIAL_TX_PIN                     -1  // 59
+  #define X_SERIAL_RX_PIN                     -1  // 63
+  #define X2_SERIAL_TX_PIN                    -1
+  #define X2_SERIAL_RX_PIN                    -1
+
+  #define Y_SERIAL_TX_PIN                     -1  // 64
+  #define Y_SERIAL_RX_PIN                     -1  // 40
+  #define Y2_SERIAL_TX_PIN                    -1
+  #define Y2_SERIAL_RX_PIN                    -1
+
+  #define Z_SERIAL_TX_PIN                     -1  // 44
+  #define Z_SERIAL_RX_PIN                     -1  // 42
+  #define Z2_SERIAL_TX_PIN                    -1
+  #define Z2_SERIAL_RX_PIN                    -1
+
+  #define E0_SERIAL_TX_PIN                    -1  // 66
+  #define E0_SERIAL_RX_PIN                    -1  // 65
+  #define E1_SERIAL_TX_PIN                    -1
+  #define E1_SERIAL_RX_PIN                    -1
+  #define E2_SERIAL_TX_PIN                    -1
+  #define E2_SERIAL_RX_PIN                    -1
+  #define E3_SERIAL_TX_PIN                    -1
+  #define E3_SERIAL_RX_PIN                    -1
+  #define E4_SERIAL_TX_PIN                    -1
+  #define E4_SERIAL_RX_PIN                    -1
+  #define E5_SERIAL_RX_PIN                    -1
+  #define E6_SERIAL_RX_PIN                    -1
+  #define E7_SERIAL_RX_PIN                    -1
+#endif
+
+//
+// Default pins for TMC software SPI
+//
+//#if ENABLED(TMC_USE_SW_SPI)
+//  #ifndef TMC_SW_MOSI
+//    #define TMC_SW_MOSI    66
+//  #endif
+//  #ifndef TMC_SW_MISO
+//    #define TMC_SW_MISO    44
+//  #endif
+//  #ifndef TMC_SW_SCK
+//    #define TMC_SW_SCK     64
+//  #endif
+//#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            13
+#define TEMP_1_PIN                            15
+#define TEMP_2_PIN                            10
+#define TEMP_3_PIN                            11
+#define TEMP_BED_PIN                          14
+
+#if TEMP_SENSOR_CHAMBER > 0
+  #define TEMP_CHAMBER_PIN                    12
+#else
+  #define TEMP_4_PIN                          12
+#endif
+
+// SPI for Max6675 or Max31855 Thermocouple
+//#if DISABLED(SDSUPPORT)
+//  #define MAX6675_SS_PIN   66   // Don't use 53 if using Display/SD card
+//#else
+//  #define MAX6675_SS_PIN   66   // Don't use 49 (SD_DETECT_PIN)
+//#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                          10
+#define HEATER_1_PIN                           7
+#define HEATER_2_PIN                          44
+#define HEATER_BED_PIN                         8
+
+#define FAN_PIN                                9
+
+#if EXTRUDERS >= 5
+  #define HEATER_4_PIN                         6
+#else
+  #define FAN1_PIN                             6
+#endif
+
+#if EXTRUDERS >= 4
+  #define HEATER_3_PIN                        45
+#else
+  #define FAN2_PIN                            45
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define LED_PIN                               13
+
+//#ifndef FILWIDTH_PIN
+//  #define FILWIDTH_PIN      5   // Analog Input
+//#endif
+
+// DIO 4 (Servos plug) for the runout sensor.
+//#define FIL_RUNOUT_PIN              SERVO3_PIN
+
+#ifndef PS_ON_PIN
+  #define PS_ON_PIN                           12
+#endif
+
+//
+// Case Light
+//
+#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN)
+  #if !NUM_SERVOS                                 // Prefer the servo connector
+    #define CASE_LIGHT_PIN                     6  // Hardware PWM
+  #elif HAS_FREE_AUX2_PINS                        // Try to use AUX 2
+    #define CASE_LIGHT_PIN                    44  // Hardware PWM
+  #endif
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
+  #if !NUM_SERVOS                                 // Prefer the servo connector
+    #define SPINDLE_LASER_ENABLE_PIN           4  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN              6  // Hardware PWM
+    #define SPINDLE_DIR_PIN                    5
+  #elif HAS_FREE_AUX2_PINS                        // Try to use AUX 2
+    #define SPINDLE_LASER_ENABLE_PIN          40  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN             44  // Hardware PWM
+    #define SPINDLE_DIR_PIN                   65
+  #endif
+#endif
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+//#ifndef E_MUX0_PIN
+//  #define E_MUX0_PIN       58   // Y_CS_PIN
+//#endif
+//#ifndef E_MUX1_PIN
+//  #define E_MUX1_PIN       53   // Z_CS_PIN
+//#endif
+//#ifndef E_MUX2_PIN
+//  #define E_MUX2_PIN       49   // En_CS_PIN
+//#endif
+
+//////////////////////////
+// LCDs and Controllers //
+//////////////////////////
+
+#if HAS_WIRED_LCD
+
+  //
+  // LCD Display output pins
+  //
+  #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+    #define LCD_PINS_RS                       49  // CS chip select /SS chip slave select
+    #define LCD_PINS_ENABLE                   51  // SID (MOSI)
+    #define LCD_PINS_D4                       52  // SCK (CLK) clock
+
+  #elif BOTH(IS_NEWPANEL, PANEL_ONE)
+
+    #define LCD_PINS_RS                       40
+    #define LCD_PINS_ENABLE                   42
+    #define LCD_PINS_D4                       65
+    #define LCD_PINS_D5                       66
+    #define LCD_PINS_D6                       44
+    #define LCD_PINS_D7                       64
+
+  #elif ENABLED(ZONESTAR_LCD)
+
+    #define LCD_PINS_RS                       64
+    #define LCD_PINS_ENABLE                   44
+    #define LCD_PINS_D4                       63
+    #define LCD_PINS_D5                       40
+    #define LCD_PINS_D6                       42
+    #define LCD_PINS_D7                       65
+    #define ADC_KEYPAD_PIN                    12
+
+  #else
+
+    #if ENABLED(CR10_STOCKDISPLAY)
+
+      #define LCD_PINS_RS                     27
+      #define LCD_PINS_ENABLE                 29
+      #define LCD_PINS_D4                     25
+
+      #if !IS_NEWPANEL
+        #define BEEPER_PIN                    37
+      #endif
+
+    #else
+
+      #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
+        #define LCD_PINS_DC                   25  // Set as output on init
+        #define LCD_PINS_RS                   27  // Pull low for 1s to init
+        // DOGM SPI LCD Support
+        #define DOGLCD_CS                     16
+        #define DOGLCD_MOSI                   17
+        #define DOGLCD_SCK                    23
+        #define DOGLCD_A0            LCD_PINS_DC
+      #else
+        #define LCD_PINS_RS                   16
+        #define LCD_PINS_ENABLE               17
+        #define LCD_PINS_D4                   23
+        #define LCD_PINS_D5                   25
+        #define LCD_PINS_D6                   27
+      #endif
+
+      #define LCD_PINS_D7                     29
+
+      #if !IS_NEWPANEL
+        #define BEEPER_PIN                    33
+      #endif
+
+    #endif
+
+    #if !IS_NEWPANEL
+      // Buttons attached to a shift register
+      // Not wired yet
+      //#define SHIFT_CLK_PIN                 38
+      //#define SHIFT_LD_PIN                  42
+      //#define SHIFT_OUT_PIN                 40
+      //#define SHIFT_EN_PIN                  17
+    #endif
+
+  #endif
+
+  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+    #define BTN_ENC_EN               LCD_PINS_D7  // Detect the presence of the encoder
+  #endif
+
+  //
+  // LCD Display input pins
+  //
+  #if IS_NEWPANEL
+
+    #if IS_RRD_SC
+
+      #define BEEPER_PIN                      37
+
+      #if ENABLED(CR10_STOCKDISPLAY)
+        #define BTN_EN1                       17
+        #define BTN_EN2                       23
+      #else
+        #define BTN_EN1                       31
+        #define BTN_EN2                       33
+      #endif
+
+      #define BTN_ENC                         35
+      #define SD_DETECT_PIN                   49
+      //#define KILL_PIN                      41
+
+      #if ENABLED(BQ_LCD_SMART_CONTROLLER)
+        #define LCD_BACKLIGHT_PIN             39
+      #endif
+
+    #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+      #define BTN_EN1                         64
+      #define BTN_EN2                         59
+      #define BTN_ENC                         63
+      #define SD_DETECT_PIN                   42
+
+    #elif ENABLED(LCD_I2C_PANELOLU2)
+
+      #define BTN_EN1                         47
+      #define BTN_EN2                         43
+      #define BTN_ENC                         32
+      #define LCD_SDSS                        53
+      //#define KILL_PIN                      41
+
+    #elif ENABLED(LCD_I2C_VIKI)
+
+      #define BTN_EN1                         22  // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
+      #define BTN_EN2                          7  // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
+      #define BTN_ENC                         -1
+
+      #define LCD_SDSS                        53
+      #define SD_DETECT_PIN                   49
+
+    #elif EITHER(VIKI2, miniVIKI)
+
+      #define DOGLCD_CS                       45
+      #define DOGLCD_A0                       44
+      #define LCD_SCREEN_ROT_180
+
+      #define BEEPER_PIN                      33
+      #define STAT_LED_RED_PIN                32
+      #define STAT_LED_BLUE_PIN               35
+
+      #define BTN_EN1                         22
+      #define BTN_EN2                          7
+      #define BTN_ENC                         39
+
+      #define SDSS                            53
+      #define SD_DETECT_PIN                   -1  // Pin 49 for display SD interface, 72 for easy adapter board
+      //#define KILL_PIN                      31
+
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+
+      #define DOGLCD_CS                       29
+      #define DOGLCD_A0                       27
+
+      #define BEEPER_PIN                      23
+      #define LCD_BACKLIGHT_PIN               33
+
+      #define BTN_EN1                         35
+      #define BTN_EN2                         37
+      #define BTN_ENC                         31
+
+      #define LCD_SDSS                        53
+      #define SD_DETECT_PIN                   49
+      //#define KILL_PIN                      41
+
+    #elif ENABLED(MKS_MINI_12864)
+
+      #define DOGLCD_A0                       27
+      #define DOGLCD_CS                       25
+
+      // GLCD features
+      //#define LCD_CONTRAST_INIT            190
+      // Uncomment screen orientation
+      //#define LCD_SCREEN_ROT_90
+      //#define LCD_SCREEN_ROT_180
+      //#define LCD_SCREEN_ROT_270
+
+      #define BEEPER_PIN                      37
+
+      #define LCD_BACKLIGHT_PIN               65  // backlight LED on A11/D65
+
+      #define BTN_EN1                         31
+      #define BTN_EN2                         33
+      #define BTN_ENC                         35
+      //#define SDSS                          53
+      #define SD_DETECT_PIN                   49
+      //#define KILL_PIN                      64
+
+    #elif ENABLED(MINIPANEL)
+
+      #define BEEPER_PIN                      42
+      // not connected to a pin
+      #define LCD_BACKLIGHT_PIN               65  // backlight LED on A11/D65
+
+      #define DOGLCD_A0                       44
+      #define DOGLCD_CS                       66
+
+      // GLCD features
+      //#define LCD_CONTRAST_INIT            190
+      // Uncomment screen orientation
+      //#define LCD_SCREEN_ROT_90
+      //#define LCD_SCREEN_ROT_180
+      //#define LCD_SCREEN_ROT_270
+
+      #define BTN_EN1                         40
+      #define BTN_EN2                         63
+      #define BTN_ENC                         59
+
+      #define SDSS                            53
+      #define SD_DETECT_PIN                   49
+      //#define KILL_PIN                      64
+
+    #else
+
+      // Beeper on AUX-4
+      #define BEEPER_PIN                      33
+
+      // Buttons are directly attached to AUX-2
+      #if IS_RRW_KEYPAD
+        #define SHIFT_OUT_PIN                 40
+        #define SHIFT_CLK_PIN                 44
+        #define SHIFT_LD_PIN                  42
+        #define BTN_EN1                       64
+        #define BTN_EN2                       59
+        #define BTN_ENC                       63
+      #elif ENABLED(PANEL_ONE)
+        #define BTN_EN1                       59  // AUX2 PIN 3
+        #define BTN_EN2                       63  // AUX2 PIN 4
+        #define BTN_ENC                       49  // AUX3 PIN 7
+      #else
+        #define BTN_EN1                       37
+        #define BTN_EN2                       35
+        #define BTN_ENC                       31
+      #endif
+
+      #if ENABLED(G3D_PANEL)
+        #define SD_DETECT_PIN                 49
+        //#define KILL_PIN                    41
+      #endif
+
+    #endif
+
+  #endif // IS_NEWPANEL
+
+#endif