Initial commit

1 files changed, 176 insertions, 0 deletions

diff --git a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h
new file mode 100644
index 0000000..2278d55
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h
@@ -0,0 +1,176 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(__STM32F1__)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME   "FLY_MINI"
+#define BOARD_WEBSITE_URL "github.com/FLYmaker"
+#define DISABLE_JTAG
+
+//
+// Flash EEPROM Emulation
+//
+#define FLASH_EEPROM_EMULATION
+#define EEPROM_PAGE_SIZE     0x800 // 2KB
+#define EEPROM_START_ADDRESS (0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE) // 256K firmware space
+#define MARLIN_EEPROM_SIZE   EEPROM_PAGE_SIZE
+
+//
+// Servos
+//
+#define SERVO0_PIN                          PA8
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                           PC12
+#define X_MAX_PIN                           PC11
+#define Y_MIN_PIN                           PC10
+#define Y_MAX_PIN                           PA15
+#define Z_MIN_PIN                           PA14
+#define Z_MAX_PIN                           PA13
+
+//
+// Steppers
+//
+#define X_STEP_PIN                          PB1
+#define X_DIR_PIN                           PB2
+#define X_ENABLE_PIN                        PB10
+#ifndef X_CS_PIN
+  #define X_CS_PIN                          PB0
+#endif
+
+#define Y_STEP_PIN                          PA2
+#define Y_DIR_PIN                           PC4
+#define Y_ENABLE_PIN                        PC5
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                          PA7
+#endif
+
+#define Z_STEP_PIN                          PA3
+#define Z_DIR_PIN                           PA5
+#define Z_ENABLE_PIN                        PA6
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                          PA4
+#endif
+
+#define E0_STEP_PIN                         PA1
+#define E0_DIR_PIN                          PC3
+#define E0_ENABLE_PIN                       PA0
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                         PC2
+#endif
+
+#if ENABLED(TMC_USE_SW_SPI)
+  #ifndef TMC_SW_MOSI
+    #define TMC_SW_MOSI                     PB15
+  #endif
+  #ifndef TMC_SW_MISO
+    #define TMC_SW_MISO                     PB14
+  #endif
+  #ifndef TMC_SW_SCK
+    #define TMC_SW_SCK                      PB13
+  #endif
+#endif
+
+#if HAS_TMC_UART
+  //
+  // Software serial
+  //
+  #define X_SERIAL_TX_PIN                   PB0
+  #define X_SERIAL_RX_PIN                   PB0
+  #define Y_SERIAL_TX_PIN                   PA7
+  #define Y_SERIAL_RX_PIN                   PA7
+  #define Z_SERIAL_TX_PIN                   PA4
+  #define Z_SERIAL_RX_PIN                   PA4
+  #define E0_SERIAL_TX_PIN                  PC2
+  #define E0_SERIAL_RX_PIN                  PC2
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                        PC6
+#define HEATER_BED_PIN                      PC7
+#ifndef FAN_PIN
+  #define FAN_PIN                           PC8
+#endif
+#define FAN1_PIN                            PC9
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN                        PC0   // Analog Input
+#define TEMP_0_PIN                          PC1   // Analog Input
+
+//
+// LCD Pins
+//
+
+//
+// LCD / Controller
+//
+#define SPI_DEVICE                             2
+#define SD_SS_PIN                           PB12
+#define SD_SCK_PIN                          PB13
+#define SD_MISO_PIN                         PB14
+#define SD_MOSI_PIN                         PB15
+
+#define SDSS                           SD_SS_PIN
+#define SD_DETECT_PIN                       PB11
+
+#define BEEPER_PIN                          PC14
+
+#define LCD_PINS_RS                         PB8
+#define LCD_PINS_ENABLE                     PB9
+#define LCD_PINS_D4                         PB7
+#define LCD_PINS_D5                         PB6
+#define LCD_PINS_D6                         PB5
+#define LCD_PINS_D7                         PB4
+
+#define BTN_EN1                             PD2
+#define BTN_EN2                             PB3
+#define BTN_ENC                             PC13
+
+#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+  #define BTN_ENC_EN                 LCD_PINS_D7  // Detect the presence of the encoder
+#endif
+
+//
+// Filament runout
+//
+
+//
+// ST7920 Delays
+//
+#ifndef ST7920_DELAY_1
+  #define ST7920_DELAY_1            DELAY_NS(96)
+#endif
+#ifndef ST7920_DELAY_2
+  #define ST7920_DELAY_2            DELAY_NS(48)
+#endif
+#ifndef ST7920_DELAY_3
+  #define ST7920_DELAY_3           DELAY_NS(715)
+#endif